The air outlet on the belt cover in Carbon with matt surface for the Ducati XDiavel 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Our carbonpart weighs only 20g! Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airtube cover left  (gloss) for the Ducati Panigale V4 / V4 S is delivered in glossy surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance.    This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airtube cover left  (matt) for the Ducati Panigale V4 / V4 S is delivered in matt surface. In this finish. the part  matches the original matt carbon parts. offered by Ducati Performance. perfectly.   This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The Airtube cover right (gloss) for the Ducati Panigale V4 / V4 S is delivered in glossy surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance.     This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The Airtube cover right  (matt) for the Ducati Panigale V4 / V4 S is delivered in matt surface. In this finish. the part  matches the original matt carbon parts. offered by Ducati Performance. perfectly.   This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The carbonfiber Airtube cover left side with gloss surface for the Ducati Diavel 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbonfiber Airtube cover left side with matt surface for the Ducati Diavel 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbonfiber Airtube cover right side with gloss surface for the Ducati Diavel 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbonfiber Airtube cover right side with matt surface for the Ducati Diavel 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The wind tunnel cover on the left side for the Ducati Streetfighter V2 significantly changes the appearance of the motorcycle. The motorcycle looks sportier and even more aggressive.   The glossy finish underlines the roots of the bike on the racetrack   The component can utilize its full potential not only technically. but also optically. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The wind tunnel cover on the left side for the Ducati Streetfighter V2 significantly changes the appearance of the motorcycle. The motorcycle looks sportier and even more aggressive.   The matte finish is identical to the finish of the Ducati Performance Parts   In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The airtube cover in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The wind tunnel cover on the right side for the Ducati Streetfighter V2 significantly changes the appearance of the motorcycle. The motorcycle looks sportier and even more aggressive.   The glossy finish underlines the roots of the bike on the racetrack   The component can utilize its full potential not only technically. but also optically. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The wind tunnel cover on the right side for the Ducati Streetfighter V2 significantly changes the appearance of the motorcycle. The motorcycle looks sportier and even more aggressive.   The matte finish is identical to the finish of the Ducati Performance Parts   In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

This Airventcover for the Ducati Multistrada DVT from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

This part for the Ducati Multistrada DVT from 2015 is a direct replacement for the original component. Only the original fitting points are used for an appropriate mounting. The part can also be orderd in matte Surface.  matching perfectly with the original Ducati Perfomance carbonparts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and gives a unique UV resistance. 

The Airventcover on sidefairing left side in matt surface for the Ducati Multistrada DVT from 2015 is a direct replacement for the original component. Only the original fitting points are used for an appropriate mounting. The part can also be orderd in matte Surface.  matching perfectly with the original Ducati Perfomance carbonparts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and gives a unique UV resistance.  

This Airventcover for the Ducati Multistrada DVT from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The airventcover (right side) in our unique design for the Honda CBR 1000 RR Fireblade 2017 blends into the motorcycle's overall appearance. In direct contact with the painted side panel. the original matte plastic airventcover does not really look quite valuable. The Ilmberger Carbon airventcover transfers the Blade´s looks back to its worthy overall apperance. specially in this frequent field of vision. As the part is made of Ilmbergers extremely stiff carbon fibres. it also gives the whole area more stability than does the OEM plastic part. Of course. the airventcover can also be mounted separate. so without Ilmbergers optional frame cover (article number RAR.015.CBR17.K). This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

A lightweight silencer housing and a heat shield made of carbon combined with a link pipe and header made of stainless steel, as well as an end cap made of titaniumresult in a system that is 2.2 kg (-31%) lighter than the stock component.The new design features a shorter silencer that provides a sportier look and exits prominently on the side of the motorcycle. The performance increases by 3.3 kW (4.5 hp) at 9,600 rpm, determined by comparing a Tracer 9 with a Racing Line (Carbon) exhaust system against a motorcycle with a stock exhaust system.Sporty, perfectly tuned racing sound developed for use on track days and closed racetracks.The exhaust system is compatible with Yamaha hard-shell cases and the accessory main stand.When installing the Racing Line (Carbon) exhaust system, the engine control light will illuminate, so a remapping of the ECU is mandatory.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

This full system is completed with a lightweight titanium silencer and a stainless steel header, providing weight savings, increased performance, and more torque. The impressive sporty Akrapovič sound is perfectly tuned to the racing culture of the bike. Optional track day link pipe/collector (stainless steel) lowers the noise level for use on racetracks where lower noise levels are required. The carbon silencer mount (needed for installation if the passenger footpegs are removed) is already included in the package. For perfect performance, throttle response, and durability, reprogramming of the control unit is required.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

This product is made entirely from lightweight, high-quality titanium alloys. Different thicknesses in various sections ensure perfect protection and reduce overall weight – achieving a saving of 19.7% (0.8 kg) compared to the stock exhaust system. With the additional strength created by the design, the system offers improved resilience under the most demanding conditions. Designed to fit perfectly in the limited space on the motorcycle, the system has been crafted with its maximum possible size in mind. This allows for increased sound reduction to minimize impacts on the natural environment. At the same time, it promotes improved exhaust flow from the combustion chamber with as few restrictions as possible.The power and torque values are increased by an additional 0.5 kW (0.7 hp) at 12,500 rpm and 0.5 Nm at 12,000 rpm when tested in “back-to-back tests” on the company’s proprietary test bench against a stock exhaust system. With better throttle response across the entire RPM range, the Evolution Line (Titanium) features a newly profiled surface. This influences the deep, full sound of the system. Additionally, it is equipped with an integrated resonance chamber that ensures optimal performance in line with the characteristic sound of an Akrapovič exhaust system. All these features are carefully designed to meet the FIM noise limits for competitions.Finished with a specially embossed logo on the surface, there are no stickers or engravings, but rather a different technique for applying the logo. Designed for use exclusively on racetracks, installation is possible via plug-and-play. Re-mapping is not required.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

This top-of-the-line full system is made from lightweight titanium and is designed to support performance and handling. With a deep, sporty sound, as well as increased power and improved torque across the entire RPM range, this system is simply the best option for the Honda CBR1000RRR-R Fireblade. Race-proven materials give the motorcycle a true racing feel with design, performance, and sound straight from the racetrack.Optional track day link pipe/collector (stainless steel) lowers the noise level for use on racetracks where lower noise levels are required.The carbon muffler bracket (needed for installation if the passenger footpegs are removed) is already included in the system. For perfect performance, throttle response, and durability, reprogramming of the control unit is required.THIS PRODUCT DOES NOT MEET EMISSION STANDARDS FOR ROAD USE.