Adapter Cap for Gear LeverSimply slide the gear lever adapter over the existing gear lever. This extension allows for safer shifting and better accessibility. The gear lever is extended by 15 mm outward.By making a saw cut in the cap, it can be compressed in a vice and adjusted to the often reduced Ø of the gear lever rubber due to wear.Easy installation using clamping technology.We have revised the gear lever cap and equipped it with a black plastic cap. This has resulted in a smoother shifting process and protects the boot.For gear levers with a rubber pad Ø of 19 mm, we recommend our gear lever cap. It extends the gear lever by 15 mm outward, making it more accessible.All items have been mounted and tested on original motorcycles - without any modifications.

To be placed on the Rack-Pack, Travel-Zip, or as side bags. These bags allow you to store small items that would otherwise get lost in the vastness of large packing bags. They are also useful for keeping the first aid kit readily accessible. The clever attachment allows the bag to be quickly removed without tools.Best visibility and thus safety!Due to its exposed position, the neon yellow Cordura bag is visible from all sides, providing additional safety. It is never obscured by the rider, and woven reflective threads bounce back any incoming light strikingly at night.Material: PU-coated CORDURA®, dustproof and waterproof (IP64)Size: SColor: neon yellowCapacity: 2.0 litersWeight: 105 g

NEW!!! R Nine T Adjustable Clip-On Handlebars MultiClip Ø55/70 mm Clip-On Handlebars multiClip The clip-on handlebars that adapt to the rider * Individually adjustable clip-on handlebars that adapt to the rider * Tour version: Height adjustment approx. + 70 mm from the original handlebar position * Also suitable for fork diameters 41/43/45/48/50/53/55/58 mm * Laser scaling for symmetrical and correct adjustment in all positions * Maximum safety against twisting due to triple clamping on the fork * Handlebar tube bend of 5° for optimal fine adjustment * CNC machined from high-strength aluminum, black anodized

The airchannel cover in carbon for the BMW R 90 T is a direct replacement for the original component.  Attention: The cover fits. without any necessary changes on the bike. from model 08/2015! It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

With additional available headers made of the finest titanium, you can upgrade your Akrapovic Slip-On exhaust system to a full system. The link pipe required for the slip-on installation is necessary for mounting.Make your bike something special – with more power, beautiful design, and the unique Akrapovič sound.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

Titanium link pipe for deeply mounted silencer of the exhaust system.

For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

Mehr Performance und Komfort für ihre BMW RnineT /Scrambler/Urban G/S mit dem Black-T Federbein-Typ Stage3. Ob sie nun zur Kurvenhatz oder einer gemütlichen Tour mit Freunden aufbrechen, der große Einstellbereich ermöglicht eine treffendere Anpassung von Balance und Dämpfung, als dies bei den Serienkomponenten möglich ist. Das Stage3 Federbein in Emulsionsausführung kann zur Beladungsanpassung auf das große Reisegepäck per Handrad und hydraulischer Federvorspannung justiert werden. Die Zugstufeneinstellung erlaubt die nötige Feinabstimmung auf jeden Straßenzustand und Einsatzzweck. Egal ob BAB/Schnellstraßen, Bundesstraßen, kleinste Landstraßen oder flotter, ambitionierter Fahrstil. Die neue Fahrwerksdimension für ihre /Scrambler/Urban G/S ab 2016.   Wichtiges in Kürze: - Das Federbein ist auf Basis unserer Erfahrungen für die BMW RnineT konfiguriert und fahrfertig eingestellt. - Parameter sind: Fahrzeuggewicht / Anlenkung des Federbeins / bauliche Gegebenheiten / Testfahrten. - Bei allen Fahrwerkslösungen sollten Heck- und Frontbereich des Motorrads angepasst werden. - Beim Austausch nur einer Komponente, wird kein optimales Fahrverhalten erzielt.   Eigenschaften des Black-T Stage3 Federbeins: - Das Federbeingehäuse ist aus Aluminium gefertigt. - Dadurch geringst mögliches Gewicht. - Es sind Reibungsarme Spezial-Dichtungen mit integriertem Teflon-Stützring für geringen Verschleiß und lange Lebensdauer der Federbeine. - Emulsionsbauweise-Bauweise und feineres Ansprechen des Federbeins. - Große 16 mm Kolbenstange aus Chrom-Molybdän-Stahl für maximale Stabilität und Haltbarkeit - 46mm Dämpferkolben mit speziellem Touratech-Setup. - Im Federbeinauge sind stabile Edelstahlbuchsen für die Befestigungsschrauben verbaut. - Dadurch stabiler, spielfreier Sitz der Befestigungsschraube auch bei höchsten Belastungen. - Alle Bauteile und Komponenten sind auf intensiven Einsatz im Reisebetrieb ausgelegt. - Hydraulische Highend-Federvorspannung über ein gut zugänglich positioniertes Handrad. - QR-Barcode auf dem Federbein mit den individuellen Federbein-Informationen. - Voll servicefähig. Dadurch dauerhaft höchste Fahrdynamik.   Das hier verbaute Grund-Setup ist abgestimmt auf Fahrer bis 100 kg zuzüglich Motorad-Bekleidung ausgelegt. Anpassungen bei sehr viel höheren Zuladungen oder anderen außergewöhnlichen Anforderungen sind möglich. Das Federbein wird dann von uns individuell an Ihre Bedürfnisse angepasst.   Lieferumfang: - Einbaufertiges Federbein. - ABE Unterlagen - Montageanleitung / Benutzer-Handbuch   "Optional" auch mit schwarzer Austauschfeder erhältlich   Sie haben weitere Fragen? Wir beraten Sie gern persönlich kontaktieren sie uns. E-Mail: Telefon +49 (0)7728-9279-1555 Bitte nutzen Sie dafür unseren Fahrwerkscheck-Bogen und senden Sie uns das Formular ausgefüllt zu

Dieses BLACK-T Stage4 Federbein ist perfekt auf die BMW RnineT - Scambler/Urban G/S zugeschnitten. Ob Sie nun zur Kurvenhatz oder der Tour mit Freunden aufbrechen, Sie können dieses edle Federbein jederzeit den Beladungs- und Fahrzuständen anpassen. Von sportlich dynamischer Fahrweise bis zur Tour mit der Hecktasche und/oder Soziusbetrieb kann jede Art von Zuladung durch den sehr großen Einstellbereich kompensiert werden. Die Balance des Motorrads kann leicht und schnell per Handrad über die hydraulische Federvorspannung von Ihnen wiederhergestellt werden. Die sehr fein justierbare Dämpfung am Ausgleichsbehälter ermöglicht jederzeit eine wirkungsvolle, präzise und Ihrem persönlichen Fahrstil angepasste Fahrwerkseinstellung.  Für jeden Straßenzustand und Einsatzzweck, egal ob BAB/Schnellstraßen, Bundesstraßen, kleinste Landstraßen, oder flotter, ambitionierter Fahrstil. Sie werden ein völlig neues Fahrgefühl mit Ihrer BMW RnineT - Scambler/Urban G/S erleben.   Wichtiges in Kürze: - Das Federbein ist auf Basis unserer Erfahrungen für die BMW RnineT - Scambler/Urban G/S konfiguriert und fahrfertig eingestellt. - Parameter sind: Fahrzeuggewicht / Anlenkung des Federbeins / bauliche Gegebenheiten / Testfahrten. - Bei allen Fahrwerkslösungen sollten Heck- und Frontbereich des Motorrads angepasst werden. - Beim Austausch nur einer Komponente, wird kein optimales Fahrverhalten erzielt.   Das hier verbaute Grund-Setup ist abgestimmt auf Fahrer bis 100 kg zuzüglich Motorad-Bekleidung ausgelegt.  Anpassungen bei sehr viel höheren Zuladungen oder anderen außergewöhnlichen Anforderungen sind möglich. Das Federbein wird dann von uns individuell an Ihre Bedürfnisse angepasst.   Lieferumfang: - Einbaufertiges Black-T Stage4 Federbein. - ABE Unterlagen - Montageanleitung / Benutzer-Handbuch   "Optional" auch mit schwarzer Austauschfeder erhältlich   Sie haben weitere Fragen? Wir beraten Sie gern persönlich kontaktieren sie uns. E-Mail: Telefon +49 (0)7728-9279-1555 Bitte nutzen Sie dafür unseren Fahrwerkscheck-Bogen und senden Sie uns das Formular ausgefüllt zu

This BLACK-T Stage4 shock absorber is perfectly tailored to the BMW RnineT/Urban G/S. Whether you're heading out for a twisty ride or a tour with friends, you can adjust this elegant shock absorber to suit any load and riding conditions at any time. From sporty dynamic riding to touring with a rear bag and/or passenger operation, any type of load can be compensated for by the very large adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel through the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for effective, precise, and personalized suspension settings tailored to your riding style at any time. For every road condition and purpose, whether on highways, federal roads, small country roads, or spirited, ambitious riding. You will experience a completely new riding sensation with your BMW RnineT /Scrambler/Urban G/S. Important points at a glance: - The shock absorber is configured based on our experiences for the BMW RnineT and is ready to install. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling. The basic setup used here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs. Scope of delivery: - Ready-to-install Black-T Stage4 shock absorber. - ABE documents - Installation instructions / user manual "Optional" also available with black replacement spring Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)

Artikelnummer: 76 61 5 A82 572Praktischer Schlüsselanhänger mit Make Life a Ride Schriftzug und großem, eingewebtem BMW Motorrad Schriftzug.ProdukthighlightsKleiner Make Life a Ride SchriftzugGroßer BMW Motorrad SchriftzugEckdatenMaterial: 100 % Baumwolle

BMW Original Repair Connector 4-Pole No. 610615 Item Description This offer includes 1 repair connector 4-pole. This offer applies to the red marked connector!!! ( Illustration No. 5 ) BMW Part Number: 83300402340 Fits according to part number for the following vehicles: K50 (R 1200 GS)   (10/2011 — 10/2016) K51 (R 1200 GS Adventure)   (09/2012 — 10/2016) K52 (R 1200 RT)   (01/2013 — 10/2016) K53 (R 1200 R)   (11/2013 — 10/2016) K54 (R 1200 RS)   (06/2014 — 10/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 08/2016) K23 (R nineT Scrambler)   (09/2015 — 10/2016) K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010) K42 (HP4)   (09/2011 — 07/2014) K46 (S 1000 RR)   (09/2008 — 10/2016) K47 (S 1000 R)   (02/2013 — 07/2016) K49 (S 1000 XR)   (05/2014 — 09/2016) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 10/2016) K70 (F 700 GS)   (06/2011 — 10/2016) K71 (F 800 S, F 800 ST, F800GT)   (12/2004 — 09/2016) K72 (F 650 GS, F 800 GS)   (10/2006 — 10/2016) K75 (F 800 GS Adventure)   (05/2012 — 10/2016) K73 (F 800 R)   (12/2005 — 09/2016) R13 (F 650 GS, GS Dakar)   (02/1999 — 10/2007) K14 (F 650 CS)   (11/2000 — 07/2005) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 10/2016) K19 (C 650 GT)   (01/2011 — 10/2016) R13 (G 650 GS)   (02/2008 — 10/2015) R13 (G 650 GS Sertão)   (07/2010 — 11/2014) 259 (R 850 GS, R 1100 GS)   (04/1993 — 07/2006) R21 (R 1150 GS)   (09/1998 — 11/2003) R21 (R 1150 GS Adventure)   (07/2001 — 09/2005) 259R (R 850 R, R 1100 R)   (09/1993 — 11/2002) 259 (R 850 RT, R 1100 RT)   (05/1994 — 11/2001) R28 (R 850 R, R 1150 R, Rockster)   (11/1999 — 07/2007) R22 (R 850 RT, R 1150 RT, R 1150 RS)   (01/2000 — 03/2006) 259C (R 850 C, R 1200 C)   (04/1996 — 07/2004) 259 (R 1100 S, R 1100 RS)   (01/1992 — 07/2005) 259C (R 1200 C Montauk)   (10/2002 — 10/2004) 259C (R 1200 C Independent)   (05/2000 — 08/2004) K30 (R1200 CL)   (10/2001 — 07/2004) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K 1200 RS, K 1200 LT)   (04/1996 — 07/2008) K41 (K 1200 GT, K 1200 RS)   (03/2000 — 07/2005) C1   (10/1999 — 04/2003)

Original BMW Spare Part Part Number: 21217702595 According to the part number, it fits the following vehicles:

Der sportliche Slip-on-Schalldämpfer aus Titan mit Carbon-Endkappe verleiht dem Scrambler ein besonders dynamisches Erscheinungsbild und einen kernigen Sound. Slip-on-Schalldämpfer für kernigen Sound und Gewichtsreduzierung in exklusivem Design Hoher Individualisierungseffekt mit eigenständiger Optik Langes Verbindungsrohr mit 2 Carbon-Hitzeschutzblenden Gewicht (inklusive Verbindungsrohr): 2,2 kg, Gewichtreduzierung gegenüber Serie ca. 2,6 kg Drehmoment und Leistung auf Serienniveau Akrapovič Schriftzug auf Seitenfläche gelasert Nur für Solobetrieb Optional: Abdeckung für Hauptrahmenverschraubung Schalldämpfer komplett aus Titan (Mantel, Verbindungsrohr und Innenaufbau); Endkappe aus Carbon Verbindungsrohr lang : sehr hoher Individualisierungseffekt mit eigenständiger Optik, inklusive 2 Carbon-Hitzeschutzblenden für Verbindungsrohr Inklusive Verbindungsrohr lang und Halteblech !   BMW Teilenummer : 77118564693 Passt laut Teilenummer an folgende Fahrzeuge : K21 R nineT ab 2016 K22 R nineT Pure ab 2016 K23 R nieT Scrambler ab 2016 K32 R nineT Racer ab 2016 K33 R nineT Urban G/S ab 2016

BMW R nineT Valve Cover Set Cylinder Head Cover 2V Original BMW Accessories Can be easily replaced with the original valve covers. Kit for right and left. All mounting parts are included in the kit. Unique look – the 2V-style cylinder head cover in retro design gives the boxer engine a very individual appearance that perfectly integrates into the retro-sportive design of the machine. The cover, painted in Nürburg silver with a cast look made of aluminum, allows for a clear differentiation from the standard cylinder head covers. Fits up to model year 2020. High-quality cylinder head cover made of aluminum. Striking retro design in cast look. Color: Nürburg silver. Delivery includes: One cylinder head cover including spark plug shaft cover and small parts. R nineT R nineT Pure R nineT Urban G/S R nineT Scrambler R nineT Racer

BMW R NINET Set knee pad black item Description Ergonomically shaped rubber pads on the right and left side of the tank Stylish design element in the Heritage look Prevents scratching of the tank Self-adhesive, accurate positioning using template Color: Black

Just a few years ago, an elegant cover for the brake calipers was standard equipment on many motorcycles right from the factory.Unfortunately, such a protective and aesthetically pleasing cover is now hard to find. It not only conceals the often unsightly individual parts of the brake system but also ensures that aggressive brake dust does not spread onto the rims, that neither rain nor saltwater delay braking performance, and that no small stones or dirt thrown up interfere with the function of the brake pads.Our covers made from PU plastic are delivered as an easy-to-install set and provide a perfect look and safe function for the front brake system of your GS!-made from heat-resistant, highly stable plastic-easy installation by clipping on-easy removal for maintenance-sturdy metal clip for secure hold-precise manufacturing-reduces brake dust on sensitive rims-protects brake pads from dirt and water-perfect appearance of the front brake systemColor: redAlso fits the BMW RnineT (not Scrambler)!

Original BMW Zubehör Passt laut BMW Teilenummer 77518393225 an folgende Fahrzeuge: - RnineT K21 2015-2019 - RnineT Pure K22 2015-2019 - RnineT Scrambler K23 2015-2019 Offroad use only!!!

Plenty of space for luggage. Waterproof main compartment, with external pockets. Storage volume: 40 liters, dimensions (L x W x H): 50 x 33 x 37 cm. Made from water-repellent black canvas with gray straps. Additional Information

The carbon brake pipe cover for the BMW R 1200 GS (2004-2012) / HP 2 Megamoto (2008-2013) / HP 2 Sport (2008-2012) / R 1200 S (2006-2008) / R 1200 R (2007-2014) / R Nine T models greatly highlights and adds to the motorcycle&rsquos sporty styling. Certain details simply perfect a motorcycle! This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The exhaust end caps (2-piece) in carbon for the BMW R NineT Scrambler replace the original component using the original mounting points.Our exhaust end caps weigh only about 40g. For these thermally highly stressed carbon parts, we use special high-temperature prepreg material (see FAQ) to avoid discoloration and yellowing. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and higher stiffness.The carbon part was completely manufactured from prepreg (see FAQ) material in an autoclave according to the latest guidelines and, as is customary for us, coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only technically does the coating excel, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.