KTM

Infinitely adjustable folding mirror in length and angle, universally suitable for most motorcycle models.- Suitable for left and right- With ECE approval mark!Scope of delivery: - 1 mirror- Mounting adapter:1x M8 x 1.25 with right-hand thread1x M8 x 1.25 with left-hand thread1x M10 x 1.25 with right-hand thread1x M10 x 1.25 with left-hand threadFor BMW R1200GS/ R1200GS Adventure/F850GS/ F750GS/ F800GS/ F700GS/ F650GS(Twin)/ HP2/ R1250GS/ R1250GS Adventure and Triumph Tiger 1050, the adapter M10x1.5 (01-040-0761-0) is required!

BATTLAX-BT-46TOURING MOTORCYCLE TIRE   Further development of a legend with modern technology Improvements in all areas - even on wet roads Even wear  Technical Data:Width:   130 Aspect Ratio:   80 % of widthConstruction:   - (Bias tire) Rim Diameter:   17 inchesLoad Index:   65 Speed Index:   H -210 km/h Profile:   BT46 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

The sensor for the ABS is just as safety-relevant as it is sensitive. So it is only natural that we have developed aprotector for this component. Especially for a motorcycle like the KTM, which is sometimes driven on gravel. And what kicked-up stones can do in terms of damage doesn't need much explanation to an experienced off-roader.Material: 1.5mm stainless steel

ADVENTURE-RACK Gepäckträger SW-MOTECH fertigt diesen vielseitigen ADVENTURE-RACK Gepäckträger passend für die KTM 1290 Adventure. Bereit für große Abenteuer: unser ADVENTURE-RACK überzeugt durch seine extreme Belastbarkeit und die funktionsorientierte Form. Mehr als 15 Jahre Erfahrung in der Fertigung von Gepäckträgern und das Feedback von Kunden und Testfahrern sind in die Entwicklung dieses Alu-Gepäckträgers geflossen. Materialstärke, Gewicht und Geometrie wurden für anspruchsvolle Touren sowie für den Offroad-Einsatz optimiert. Die modellspezifischen Anbauelemente garantieren beste Passform und eine einfache Montage an Originalanbaupunkten. Gezielt für Reiseenduros, große Straßen- und Sporttouringmaschinen entwickelt bietet das ADVENTURE-RACK eine großzügige Auflagefläche. Zahlreiche, große Verzurrösen geben Hecktaschen sicheren Halt. Die Funktionsbohrungen nehmen Adapterkits zur Befestigung von Topcases von SW-MOTECH, Givi, Krauser und Shad oder SysBag Taschen auf. Der Gepäckträger wurde unter harten Bedingungen im Labor und im Gelände getestet. Seine Robustheit wurde dabei bestätigt. Das ADVENTURE-RACK trägt dein Gepäck bis ans Ende der Welt oder wohin du so willst. Besonders robuster Gepäckträger für lange Touren auf und abseits der Straße Ausgewählte Fertigungsverfahren und seine optimierte Form verleihen dem ADVENTURE-RACK eine Extraportion Stabilität Extreme Belastbarkeit bei Vibration, Stößen und hohem Gewicht unter harten Bedingungen im Labor und im Gelände getestet Viele Funktionsbohrungen: für TRAX Topcases, SysBag Taschen mit Adapterplatte sind für die jeweiligen Adapterkits separat erhältlich Adapterkits zur Befestigung von Topcases anderer Hersteller (Givi Monokey und Monolock, Krauser, Shad I und II) ebenfalls erhältlich Leichtes Verzurren von Gepäck an zahlreichen, großen Verzurrösen, durchfädeln von 25 mm-Verschlüssen möglich Besonders großzügige Auflagefläche (Breite: 32,9 cm vorne, 22,5 cm hinten, Länge: 30,3 cm) Einfache Montage an Originalanbaupunkten mit modellspezifischen Anbauelementen Wirksamer Korrosionsschutz durch schwarze Pulverbeschichtung Aus leichter und dennoch robuster, 4 mm starker Aluminium-Legierung Lieferumfang 1 x ADVENTURE-RACK Gepäckträger Anbauanleitung Montagematerial Details Material: Aluminium Oberfläche: pulverbeschichtet Farbe: schwarz Gesamtgewicht: ca. 1,7 kg Genehmigungshinweis Dieses Produkt muss nicht zugelassen werden. Es benötigt daher auch keine Prüfzeichen, Gutachten oder Allgemeine Betriebserlaubnis. Die Informationen in der Anbauanleitung sind zu beachten.

The ADVENTURE-RACK luggage rack fits perfectly on KTM models and the Husqvarna Norden 901, impressing with extreme load capacity and function-oriented design. These premium aluminum racks result from over 15 years of experience and valuable feedback from customers and test riders. Material thickness, weight, and geometry are specifically optimized for demanding touring and off-road adventures. Model-specific mounting components guarantee perfect fit and user-friendly installation at original attachment points. With generous loading surface and numerous tie-down loops, ideal for secure cargo attachment.

During many of our trips to dusty and dry countries, as well as during most sports and rally events, we faced the issue of fine dust repeatedly entering the intake tract through the air filters. This sometimes had significant consequences for the engine. Over the past few years, we have tried and tested many air filters. We found the solution to our dust problem in Australia. Unifilter Australia provided us with air filters for testing that met our expectations 100%. The Touratech Research & Development Team used the Unifilter in all racing events during the 2006 season and has since found no dust residue in the air filter box or engine. Another advantage of the filters made from "High-Tech Foam" is their long lifespan. The filter is not discarded when it gets dirty; instead, it is washed and re-oiled, allowing it to be reused repeatedly.Also suitable for KTM Super Adventure S, R, T (from 2017)This way, you not only protect your engine but also your wallet.In our opinion, this is an absolute must for off-road motorcycles!Made in AustraliaScope of delivery:1x air filter sealImportant tip:- In road use, the air filter should be checked and cleaned if necessary between the actual maintenance intervals due to its design (foam).- In off-road sports, the air filter is usually checked after each race and therefore automatically falls within the regular maintenance intervals.

Extremely versatile little helpers for packing and securing. - 100 kg guaranteed load capacity- with metal buckle (galvanized and painted)- with TOURATECH logo in yellowColor: black Length: 75 cmWidth: 18 mm

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

The ideal protection for the fairing of the KTM 1290 Super Adventure.The crash bar extension from Touratech offers optimal protection for the expensive plastic parts of the fairing. It fits both technically and visually perfectly on the original KTM crash bar of the Super Adventure. For all 1290 riders who use their motorcycle "properly," the crash bar extension is very sensible.A novel connection technology allows for a force-locking installation of the extension on the original bar. In the event of a fall, the forces that occur are distributed as effectively as possible. The tank fairing and ultimately the tank itself are safe.The design of the extension perfectly follows the visual line of the machine and gives it an individual appearance.Material: Stainless steel

The rear brake cylinder is covered and protected by a plastic part on the KTM 790/890 Adventure and Husqvarna Norden 901. However, in off-road use, the original part can be severely scratched or even broken due to stone impacts. The Touratech brake cylinder guard has a larger area, fully covering the entire brake cylinder, including the brake line connection. This weak point is effectively protected. Additionally, the black anodization gives the motorcycle a perfect off-road look.Our extremely robust brake cylinder cover made of 3 mm thick aluminum protects the brake cylinder and the boot.

In addition to our chain guard (373-5045), we have developed an effective lower protection made from the same aluminum/stainless steel material combination. Especially in off-road conditions, it prevents branches and other objects from knocking the chain off the sprocket.The chain guard fin is sturdier and significantly more attractive than the original plastic part!The installation of the chain guard can be done easily and quickly using the already existing mounting points.

A core made of nearly indestructible stainless steel supports the cover made of lightweight aluminum. Form and function are no longer a contradiction! The combination of these two materials gives your 1290 that certain something!The Touratech chain guard is significantly more stable than the original plastic part and thus fits better with a large adventure bike like the 1290 Super Adventure.The installation of the chain guard can be done easily and quickly by using existing mounting points.

“Ready to race” can also be comfortable!Even with KTM's touring motorcycles, the point of “ready to race” has always been at the top of the development list.It’s no surprise that we found several aspects of the standard seat that need to be changed to significantly improve comfort for both rider and passenger on long journeys.Our seats are constructed with a special foam in a comfortable blend and a unique, durable plastic base, maximizing long-distance comfort for the sportiest of all adventure bikes.The individual seats also fit the Adventure in “R” version and provide an excellent alternative to the original, one-piece sports seat.Also suitable for KTM Super Adventure S, R, T (from 2017)The high-quality, multi-layer seat cover is equipped with a durable Fresh Touch surface coating. It noticeably reduces the surface temperature by reflecting infrared light radiation, providing a more pleasant, cooler feeling when sitting on a motorcycle parked in the sun.An additional, exclusive comfort gain that creates excitement!The high-quality seat is delivered completely ready for installation and without the need for reupholstering, requiring no adjustments to the vehicle, and you can keep your original seat.Facts:- anatomically adapted contour developed through extensive riding tests in Germany- no sagging due to the use of a high-strength foam produced in-house- even weight distribution, optimized vehicle contact, and perfect control- bi-elastic, sweat-resistant cover material in "sand look" with sealed seams- hollow groove (depression) in the center of the seat for tailbone relief- special contour of the passenger seat surface provides secure grip during braking and acceleration- optimally positioned seams to avoid pressure points in the seating area- suitable for long distances- the standard seat height adjustment remains intact- highest quality materials and workmanship- seats can be used modularly, fitting together with the original passenger or rider seat- made in Germany- thanks to the Fresh Touch surface coating, up to 10°C temperature difference compared to the original seat cover

Diagnostic device for motor vehicles and motorcycles. A diagnostic system with an intuitive and easy-to-understand user interface in 10 languages. The simple symbol-based menu structure helps the user complete their tasks quickly and reliably. With extensive functions and special features, the user has access to a unique diagnostic system. The diagnostic device is indispensable in a modern automotive/motorcycle workshop.Supported control units:Engine electronics / Engine control unit CDICentral electronics / Chassis electronics BCMInstrument cluster / SpeedometerTire pressure monitoring RDKSABS – Anti-lock braking systemTheft warning system / Alarm systemRadio / MultimediaRadio control unitElectric hydraulic tilt standBattery management system BMSIntegrated power supply control module ICSMElectric power steering EPSElectronic power throttle EPTExhaust flap control FCEKeyless GO systemLED headlightsAutomatic transmission / Transmission controlTraction controlAirbagDiagnostic functions / Diagnostic capabilities:Service reset / Service reset / DESMO / OilRead and clear complete fault memoryKey programmingAdjust fuel injection systemUnlock immobilizerAdjust / adapt throttle valveSet date and time, e.g., after battery replacementReset adaptation valuesSpecific actual/target values / Live dataRead current mileage and softwareRead chassis numberValve clearance service resetBleed ABS pressure modulator / Bleeding test from the ABS hydraulic systemInitialize brake wear indicatorWindshield calibrationESA/SAF shock absorber calibrationStepper adjustmentCalibration: height sensor, windshield, idle actuator, film sensor, etc…Adjustment of sensors, e.g., exhaust flap, interference pipe flap, reverse assistance adjustment, vehicle speed sensor, transmission, idle actuator, lambda sensors, etc.Actuator diagnosis, e.g., fan, fuel injector, valvesTire pressure sensor RDC learning – programming – initializingNo limitations or restrictions on modelsTechnical specifications:3.5-inch IPS color display with high resolutionRobust housing with ergonomic gripsGraphical user interface with clear symbolsElongated metal dome buttons on membrane keyboardRubber-protected housingOperation without battery, power supplied by the machineUpdate via USB-C standard cableSoftware updates occur automatically via Windows softwareDimensions L/W/H 17x11x4cm Weight 300gSupports the following KTM models (with OBD EURO5 / ISO19689 diagnostic cable):150 EXC TPI250 EXC TPI250 XC-W TPI300 EXC TPI300 XC-W TPI1290 Super Adventure R / S / 3.0 Euro 51290 Super Duke R / GT / 3.0 Euro 5125 / 250 / 390 / 790 / 890 Duke690 Enduro R / SMC R390 / 890 Adventure L / R

Professional protection for the engine and exhaust header.Multiple folded recesses ensure maximum stability in the 4mm thick aluminum base plate. A substructure distributes applied forces as widely as possible. The Touratech engine protection *Expedition* is therefore one of the most robust on the market. Ground clearance is not restricted.Plastic rails on the lower part of the base plate facilitate "sliding over" stones, rocks, or tree stumps. Almost incidentally, they also ensure that no dirt can settle.The engine protection for the 1290 Super Adventure is raised so far at the front that kicked-up stones cannot damage the engine block.

To optimize the protection of your KTM, Touratech has developed a motor protection grid for the Touratech engine protection.The sturdy material guarantees the best possible protection and, thanks to the high-quality electropolishing, perfectly integrates into the design of the KTM.This all-around protection effectively shields the engine from stone impacts and dirt that can accumulate behind the fairing. The installation of the grid is incredibly easy - the engine protection does not even need to be disassembled.Material: 2 mm stainless steel

KTM has brought the 790's racing DNA to the streets. However, the original protection for the engine and tank is more of an aesthetic finish than real protection.This led to a comprehensive requirement profile for our engine protection "RALLYE Evo". It must be "rock-solid", look good, and should neither restrict freedom of movement nor add unnecessary weight to the vehicle.RALLYE Evo: The probably most robust engine protection in the world!The experiences from 20 years of producing many tens of thousands of engine protectors were utilized in the design and optimal sizing of the materials. Insights from years of use of our engine protectors, as well as feedback from our customers on previous generations of engine protection, were taken into account in the new RALLYE Evo engine protection.The result is a clever 3-part design. This simplifies installation and saves unnecessary additional weight. The resulting complete 360° protection ensures that even in the toughest off-road use, the engine, exhaust system, and critical areas of the tank are protected. Both stone impacts and ground contact can hardly harm your KTM 790.The 3-part design is supported by the use of two specially manufactured aluminum alloys, each optimized for its specific application area. However, they share one common feature: both are 4 mm thick.The special structure of the extended base plate, combined with the high-strength material, provides maximum rigidity up to the catalytic converter. Even in rough off-road use, it protects both the engine and the exhaust system equally. Flat approach angles facilitate overcoming obstacles of any kind, whether tree trunks or curbs. Professional robotic welding on high-quality tools ensures consistent quality.The two separately mounted tank protection plates are hydroformed for a perfect fit. They protect not only the widely protruding lower areas of the tank but also the fuel pump and fuel taps like a tank protects a turtle.The large cooling opening for improved engine cooling remains intact but can be protected from flying stones with the optionally available grids (372-5016) if needed.The simple attachment is done at suitable positions on the vehicle. A stainless steel reinforcement at the rear provides additional lateral support. The RALLYE engine protection can thus be used without restriction with most available center stands.The parallel use of Touratech crash bars is also hassle-free.In keeping with the motto: "As close-fitting as possible, as much freedom as necessary," there are no restrictions on ground clearance or lean angle freedom. Moreover, all screws are recessed in the smooth surface. This not only increases durability but also provides better handling off-road. By the way, the flat base design is also suitable for use with a maintenance stand."State of the art" technology combined with "state of the art" design100% made in Germany

The engine protection set, consisting of "Rallye Evo black engine protection" and "Stainless steel tank protection bars orange", fits all model years of the KTM 790 Adventure / R and 890 Adventure / R!RALLYE Evo engine protection, blackThe experience gained from 20 years of producing many tens of thousands of engine protectors has been utilized in the design and optimal sizing of the materials. Insights from years of use of our engine protectors, as well as feedback from our customers on previous generations of engine protection, have been taken into account in the new RALLYE Evo engine protection.The result is a clever 3-part construction. This simplifies installation and saves unnecessary additional weight. The resulting complete 360° protection ensures that even in the toughest off-road use, the engine, exhaust system, and critical areas of the tank are protected. Both stone impacts and ground contact can hardly harm your KTM 890/790.The 3-part construction is supported by the use of two specially manufactured aluminum alloys, each optimized for its specific application area. However, they share one common feature: both are 4 mm thick.The special structure of the extended base plate, combined with the high-strength material, provides maximum rigidity up to the catalytic converter. Even in rough off-road use, it protects both the engine and the exhaust system equally. Flat approach angles facilitate overcoming obstacles of any kind, whether tree trunks or curbs. Professional robotic welding on high-quality tools ensures consistent quality.The two separately mounted tank protection plates are hydroformed for a perfect fit. They protect not only the widely protruding lower areas of the tank but also the fuel pump and fuel taps like a tank protects a turtle.The large cooling opening for improved engine cooling remains intact but can be protected from flying stones with the optionally available grids (372-5016) if needed.The simple attachment is done at suitable positions on the vehicle. A stainless steel reinforcement at the rear provides additional lateral support. The Rallye engine protection can thus be used without restriction with most available center stands.The parallel use of Touratech engine crash bars is also hassle-free.True to the motto: "As close-fitting as possible, as much space as necessary," there are no restrictions on ground clearance or lean angle freedom. Moreover, all screws are recessed in the smooth base. This not only increases durability but also ensures better handling off-road. By the way, the flat base design is also suitable for use with a lift stand.RALLYE Evo - Probably the most robust engine protection in the world!"State of the art" technology combined with "state of the art" design100% made in GermanyStainless steel tank protection bars, orangeKTM follows an innovative design concept with the low-mounted tank of the 890/790 Adventure. How robust the tank really is doesn't necessarily need to be tested.The Touratech tank protection bars provide safety during your adventures, especially off-road. Even in the event of a simple tip-over, they ensure that the tank does not come into contact with the ground. The forces are effectively redirected, and not even a scratch remains on the plastic parts of your KTM.We have also relied on our proven stainless steel tubes with a diameter of 25 mm and a wall thickness of 2 mm here. These provide optimal protection and give the 890/790 a true adventure look without appearing oversized.The Touratech tank protection bars provide safety during your adventures, especially off-road. Even in the event of a simple tip-over, they ensure that the tank does not come into contact with the ground. The forces are effectively redirected, and not even a scratch remains on the plastic parts of your KTM."State of the art" technology combined with "state of the art" design100% made in Germany

for KTM 1050 Adventure, 1090 Adventure, 1290 Super Adventure, 1190 Adventure/ R, 790 Adventure/ R, 890 Adventure/ R, 690 Enduro/ R, 390 Adventure, as well as Husqvarna 701, Norden 901In rocky terrain, the foot brake lever can bend quickly. This is one reason for us to replace the original foot brake lever pad with a foldable one. The original pad is removed and replaced with the foldable variant. Also suitable for KTM Super Adventure S, R, T (from 2017)

The front fender crafted from Ilmberger carbon for the KTM 1290 Super Adventure from 2015 onwards exemplifies a perfect fusion of cutting-edge engineering and contemporary design. This extended front fender has been specifically developed to enhance the visual appeal of the KTM 1290 Super Adventure while simultaneously providing optimal protective functions for sensitive components such as the water cooler. The carbon fender element seamlessly integrates into the motorcycle's athletic lines and emphasizes its aggressive, modern aesthetic characteristics. The construction of the fender employs high-tech carbon material that combines optimal protective function with minimal weight contribution. The extended design not only grants the motorcycle a more aggressive appearance but also protects the water cooler and other front-mounted components from splash water, dirt, and contamination that become airborne during riding. The material composition of this fender consists of prepreg weave, a highly sophisticated material familiar from Formula 1 racing vehicle development and contemporary aerospace engineering. Prepreg weave distinguishes itself through a unique combination of properties that renders it ideally suited for motorcycle components. The high specific stiffness indicates that the material is extraordinarily stable and durable, while simultaneously the low density results in minimal weight additions. This proves particularly crucial for heavily-loaded components like fenders, which demand both stability and lightness. The prepreg carbon delivers substantially superior workmanship quality and surface finish compared to alternative carbon varieties, as the resins undergo pre-impregnation in a controlled environment. The distinctive plastic coating and high-gloss clear lacquer finish of the fender provides maximum protection against environmental influences. This dual-protection combination shields the carbon from UV radiation, weather conditions, salt spray, and chemical exposure. The glossy finish creates an impressive depth effect that underscores the elegance and premium quality of the component. The clear lacquer additionally provides protection against scratches and damage from everyday use. Installation of the carbon fender is extraordinarily straightforward thanks to utilization of the original mounting points. The component fits perfectly to the designated mounting locations and requires no modifications or adaptation work. The product arrives in ready-to-install condition, meaning it can be installed immediately after unpacking without requiring any preparatory work. This enables swift and secure assembly without specialized knowledge. The quality certifications of this product are comprehensive and well-documented. The fender features General Operating Approval (ABE), which guarantees complete road legality. The product holds TÜV certification, confirming compliance with the highest European safety standards. Manufacturing adheres to ISO 9001 standards, representing an internationally recognized quality management system. With the Ilmberger carbon front fender for the KTM 1290 Super Adventure, you acquire a premium-class product that unites design, functionality, and dependability. Enhance your motorcycle's appearance and enjoy enhanced protection for sensitive components. Place your order today and experience the quality and performance that Ilmberger carbon delivers.

For the easy and secure mounting of your navigation device or smartphone in the instrument area.The adjustable Touratech GPS mounting adapter can be easily attached to almost any handlebar clamp. The distance between the handlebar clamp screws can range from 78 to 104 mm.The infinitely adjustable swing arms allow for individual positioning within a radius of 35 mm. This keeps the view clear of the instruments or creates space for the tank bag.You can attach any of our navigation device mounts or smartphone holders to this mount with a 12 mm tube diameter.Always keep your navigation device in sight!Available in three versions:- with M8x25 mm screws, for example for:BMW G650X Challenge/Moto/Country,Ducati Desert X,KTM 1290/1190/1090/1050/890/790 Adventure, 790/890 Duke,KTM LC8 ADV/SE/SD/SM, LC4 690/640 Enduro/Enduro R/SuperMotoTriumph Scrambler 1200- with M8x30 mm screws, for example for:BMW RNineT (not Racer), F800GS/GSA/R, F700GSHonda CRF1100L Africa Twin/Adventure Sports, CRF1000L Africa Twin/Adventure Sports, VFR1200X Crosstourer,Kawasaki Versys650,Triumph Tiger 900, Explorer,Yamaha Tenere 700- with M8x35 mm screws, for example for:BMW R1250GS/GSA/R1200GS/GSA, R1200R, R1150R,BMW F900R/XR, F850GS/GSA, F750GS,Honda CBF600 (2010-), CBF1000/CBF1000F (2010-),Yamaha XT1200Z

for KTM 890 Adventure (-2022)/ 890 Adventure R (-2022)/ 790 Adventure/ 790 Adventure R/ 390 Adventure/ Husqvarna Norden 901To optimally position a GPS device in your line of sight on the KTM/Husqvarna, we have developed a sturdy mounting adapter made of stainless steel for nearly all Touratech GPS handlebar mounts. This way, your GPS device will find an ideal spot above the instruments. This mounting adapter is integrated into the top clamp. The bracket is wide enough to allow for individual positioning of a GPS device according to personal preference.The precise workmanship, robust material, and optimal length of the arms reduce vibrations of your GPS device or smartphone to an absolute minimum.

Griffschutz für KTM 1050/1190 Adventure/R von Hepco&Becker Sowohl bei der Fahrt im Gelände als auch auf Asphalt gewährleistet der Hepco&Becker Griffschutz einen zuverlässigen Schutz der Hände des Fahrers und des Motorradlenkers. Modellspezifischer Handprotektoren-Schutzbügel für deine KTM 1050/1190 Adventure/R - Genau auf dein Motorrad angepasste Stahlrohrkonstruktion für den perfekten Look. Ideal für alle Adventure Bikes, um die Handprotektoren zu stabilisieren und vor z.B. Bruch bei einem Umfaller oder Bekanntschaft mit einem größeren Ast zu schützen! Zuverlässiger, robuster Schutz der Lenkerarmaturen bei Stürzen mit optimaler Aerodynamik. Individuell wie Du - Mach es zu deinem Bike! Details & Eigenschaften: Material: Stahlrohr, Verarbeitung made in Germany Oberflächenfinish: Hochwertige, farblich passende Pulverbeschichtung Farbe: schwarz Für Baujahre: 2013-2016 Lieferumfang: 1 Satz Griffschutzbügel (links & rechts) Vollständiger Satz Montagematerial Zweisprachige, bebilderte Montageanleitung Wichtige Hinweise: Die auf den Bildern gezeigten Kunststoff-Handprotektoren gehören zum Lieferzustand des Motorrads, sie sind NICHT enthalten! Bitte beachten Sie die die in der Montageanleitung und den Eigenschaften aufgeführten modellspezifischen Hinweise! Unsere modellspezifischen Produkte sind, sofern nicht explizit anders angegeben nur für den Serienzustand der Motorrads entwickelt! Passt eventuell nicht in Kombination mit nicht-originaler Lenkerklemmung, z.B. bei Komfortlenker oder Lenkererhöhungen! Aus Sicherheitsgründen sollten alle Schutzbügel nach einem Sturz ausreichend kontrolliert und ggf. ersetzt werden.

Griffschutz für KTM 1290 Super Adventure von Hepco&Becker Sowohl bei der Fahrt im Gelände als auch auf Asphalt gewährleistet der Hepco&Becker Griffschutz einen zuverlässigen Schutz der Hände des Fahrers und des Motorradlenkers. Modellspezifischer Handprotektoren-Schutzbügel für deine KTM 1290 Super Adventure - Genau auf dein Motorrad angepasste Stahlrohrkonstruktion für den perfekten Look. Ideal für alle Adventure Bikes, um die Handprotektoren zu stabilisieren und vor z.B. Bruch bei einem Umfaller oder Bekanntschaft mit einem größeren Ast zu schützen! Zuverlässiger, robuster Schutz der Lenkerarmaturen bei Stürzen mit optimaler Aerodynamik. Individuell wie Du - Mach es zu deinem Bike! Details & Eigenschaften: Material: Stahlrohr, Verarbeitung made in Germany Oberflächenfinish: Hochwertige, farblich passende Pulverbeschichtung Farbe: schwarz Für Baujahre: 2015-2020 Lieferumfang: 1 Satz Griffschutzbügel (links & rechts) Vollständiger Satz Montagematerial Zweisprachige, bebilderte Montageanleitung Wichtige Hinweise: Die auf den Bildern gezeigten Kunststoff-Handprotektoren gehören zum Lieferzustand des Motorrads, sie sind NICHT enthalten! Bitte beachten Sie die die in der Montageanleitung und den Eigenschaften aufgeführten modellspezifischen Hinweise! Unsere modellspezifischen Produkte sind, sofern nicht explizit anders angegeben nur für den Serienzustand der Motorrads entwickelt! Passt eventuell nicht in Kombination mit nicht-originaler Lenkerklemmung, z.B. bei Komfortlenker oder Lenkererhöhungen! Aus Sicherheitsgründen sollten alle Schutzbügel nach einem Sturz ausreichend kontrolliert und ggf. ersetzt werden.