JMP Valve Caps   - made from CNC machined aluminum - silver - including sealing ring   Dimensions L x W: 21 x 10 mm   Packaging unit 2 pieces Price per pair  

JMP Valve Caps   - made from CNC machined aluminum - silver - including sealing ring   Dimensions L x W: 15 x 10 mm   Packaging unit 2 pieces Price per pair  

Yuasa Wartungsfreie Motorrad-Batterie - Wartungsfreie Hochleistungs-Starterbatterie in zuverlässiger Markenqualität - Auslaufsicher durch AGM-Technologie (Absorbed Glas Mat) - Auslaufsicheres Überdruckventil verhindert ein Entzünden des Elektrolyts bei Überdruck - Vibrationsfest - Bis zu 3x längere Lebensdauer gegenüber Standard-Batterien - Fortschrittliche Blei-Calcium Technologie erhöht die Startleistung - Sulfat-Stop schränkt die Plattensulfatierung deutlich ein - Wartungsfreie Batterien benötigen kein Nachfüllen von destilliertem Wasser - Durch erhitzen verbundenes Batteriegehäuse verhindert Leckagen und Korrosion - Die Batterie ist ab Werk mit Säure befüllt und geladen Baugleich mit: JM Herstellernummer YTX9-BS Varta Herstellernummer 50812LF GS Herstellernummer GTX9-BS FB Herstellernummer FTX9-BS Yuasa Herstellernummer YTR9-BS Exide Herstellernummer ETX-9-BS Achtung !!!! Batterie ist nicht verwendbar für MV Agusta F4 Modelle. 060

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Fully insulated bike battery disconnect switch for disconnecting the onboard network to preventdeep discharge of the battery due to constant consumers like clock, onboard computer,accessories, etc. during longer standstill periods.Disconnection is achieved simply by loosening the screw.Just loosen the screw by 1-2 turns and leave it in the switch. This way, it cannot be lost.For driving operation, please tighten it properly. Mini designFully insulated housingFlexible mounting between negative terminal and vehicle Load max. 160A - 12V / 10 sec. then pause for 30 sec.Bridge cable included.Installation instructions on product insert Dimensions:L / W / H: 62 x 25 x 38 mmCable: 200 mm

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

JMP Valve Caps   - made from CNC machined aluminum - black anodized - including sealing ring   Dimensions L x W: 15 x 10 mm   Packaging unit 2 pieces Price per pair  

Waterproof hand guards made of synthetic leather and neoprene with reflective elements for increased safety. The interior is equipped with thermal lining, allowing for better heat retention. Your hands stay warm.Quick and easy installation: suitable for all handlebars with handlebar ends. Features:• quick and easy installation• hassle-free access to controls • Material: synthetic leather and neoprene• durability through UV protection• increased safety through reflective elements• waterproof coating• warm fur lining• includes backpack bag   Dimensions: 50x26x36.5cm 59000

EBC SFA HH Scooter Sintered Brake Pads   State-of-the-art sintered metal technology for larger and faster scooters.   Advantages at a glance: - Long lifespan due to the material composition - High-quality production in our own facility - High HH friction - Suitable for high speeds

EBC Scooter Brake Pads Organicin premium quality, specially manufactured for scooters. These brake pads offer a long lifespan as well as good braking performance.

Standard Lining Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.

SV - Friction MaterialFull metallic sintered material with special coating.High friction coefficient guarantees very good performance.Can be used on almost all discs.Only in exchange for sintered materials in the original equipment.Only conditionally suitable for racing, as it has no heat resistance above 400 degrees.Only suitable for the front axle.

SH - Friction MaterialFull metallic sintered material with special coating.High friction coefficient, guarantees very good performance.Can be used on almost all discs.Only available as a replacement for sintered materials in the original equipment.Only conditionally suitable for racing, as it has no heat resistance above 400 degrees.Tuned to the friction coefficient of the SV material.Only suitable for the rear axle.

Standard Lining Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.

TRW-Lucas EC Scooter Brake Pad   - organic pad - good price/performance ratio - European production - with ABE

Scooter Carbon Brake Pads SFAC - suitable for all brake discs - no damage to the brake disc - longer lifespan due to carbon granulate - good and even braking performance through the use of copper powder - TÜV certified

EBC Organic Brake Pads in premium quality, specially manufactured for scooters. These brake pads offer a long lifespan as well as good braking performance.

JMP Bolt Valve Cap With these pretty little tire valve covers, dirt stays out and an airtight seal is ensured. Universally suitable for cars and motorcycles.   Material: Anodized aluminum in color

JMP Professional Adhesive Weight Remover   Ideal for removing adhesive weights, protective strips, labels, adhesive and type plates Solvent resistant Can be sharpened with a file No damage to surfaces Blade width 38 mm            

JMP Skan Monitor 2 Battery monitoring with your smartphone   “Not suitable for lithium batteries.”   With the JMP Skan Monitor 2 and the new free Apple or Android app “JMP BatteryMonitor II”, you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed.   The positive charge status also prevents potential early damage or failure of the battery. Through continuous recording, the charge status of the battery is captured during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. A defective regulator can be quickly recognized.   Additionally, with the new app, starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.) can be accurately checked. This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved.   The transmitter is suitable for 12 V batteries.The range is approximately 10 meters.The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5)   The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs.   Please note: The new JMP Skan Monitor 2 requires the new app “JMP BatteryMonitor II”! If the minimum voltage is not met, a reminder to recharge the battery soon will be issued.- Easy attachment using eyelets to the battery- Power consumption only about 2 mA- No damage to the transmitter or battery occurs in case of reverse polarity- Free app available for download in the Apple App Store or Google Play Store under JMP Battery Monitor II- Voltage recording also during the ride. Results can be sent via email. File display in Excel is possible.                

CC Carbon Ceramic Scooter Brake Pads for Front or Rear An organic brake pad for scooters that offers an optimal quality-to-price ratio. A pad that is characterized by its durability and optimal performance under all conditions, making it ideal for commuter, leisure, or cargo scooters.

EBC Scooter Brake Pads Organicin premium quality, specially manufactured for scooters. These brake pads offer a long lifespan as well as good braking performance.

EBC HH SinterbelagDer EBC HH-Bremsbelag ist ein hochwertiger Sintermetall-Belag, speziell entwickelt für maximale Bremsleistung bei Motorrädern.Die Kennzeichnung „HH“ steht für die höchste Reibwertklasse nach SAE J661 – sie garantiert hervorragende Verzögerungswerte bei trockenen wie nassen Bedingungen. Merkmale:- Sehr hoher Reibwert (HH-Klasse) für kraftvolles Bremsen- Konstante Performance auch bei hohen Temperaturen und extremer Belastung- Sintermetall-Mischung für lange Lebensdauer und geringe Fading-Neigung- Optimale Dosierbarkeit und gleichmäßiger Druckpunkt- Für Straße und sportliche Fahrweise (auch Touring geeignet)- ECE R 90-zertifiziert und TÜV-geprüft Einsatzbereiche:Ideal für leistungsstarke Motorräder, sportliche Fahrer und alle, die Wert auf maximale Bremskraft, Standfestigkeit und Haltbarkeit legen.

EBC SFA HH Scooter Sintered Brake Pads State-of sintered metal technology for larger and faster scooters. Advantages: - Long life due to the material composition - High-quality production in our own factory - High friction HH - Suitable for high speeds