1 Set Original BMW black aluminum cases R + L suitable for R1200GS LC and Adventure including mounting system for aluminum cases and locking cylinders. Waterproof Robust Practical Complete The set consists of: 1 x black aluminum case right 1 x black aluminum case left 1 x case holder right 1 x case holder left 1 x cross brace 1 x set of mounting parts for case holder 6 x repair kit for locking cylinders Top case and top case holder can be ordered separately! The cases are coated in black. Volume 38 liters right Volume 44 liters left The case holder is made of stainless steel and has a matte finish. With the included matching locks, the locks can be adapted to the vehicle key. Locks can be ordered separately: (Part number available in our shop 1005-77498544517) 3 locking cylinders are required per case. The complete case holder can be ordered separately: (Part number available in our shop 1005-46548520067KIT)

Often, it's the little things that are missing for the optimal riding experience. While the original gear lever of the GS can be adjusted in height, it cannot be adjusted in length. The gear lever from Touratech can be precisely adjusted to your foot, and since it is foldable, it won't break off with every fall. Additionally, the gear lever made from a high-quality aluminum-stainless steel material mix enhances the visual appeal of your GS!Adjustment range: 32 mm

Adventure Handprotektoren-KitEgal ob auf der Straße oder im Gelände: Das Adventure Handprotektoren-Kit schützt die Lenkerarmaturen deines Bikes bei Stürzen und deine Hände vor Witterungseinflüssen sowie Steinschlag und Ästen. Die Basis bildet ein stabiler Aluminiumbügel, an dem die Adventure Handschalen befestigt sind. Der schlagfeste Kunststoff der Schalen ist flexibel und bietet besten Schutz vor Wind und Wetter, bei Fahrten im Gelände werden die Hände vor Steinschlag und Kontakt mit Ästen und Sträuchern bewahrt. Die eleganten Schalen mit mattschwarzer Oberfläche sorgen für einen prägnanten Look an deinem Bike. Dank der geschlossenen Form der Adventure Handschalen werden Lenker und Hände auch auf den Seiten abgedeckt. Für noch mehr Schutz kann das separat erhältliche Sturzpad-Set an den Handprotektoren befestigt werden. Für mehr Witterungsschutz sorgt das Erweiterungs-Set, mit dem die Protektionsfläche der Adventure Handschalen vergrößert wird.Einfache Zweipunkt-Montage ohne SpezialwerkzeugModellspezifischer Aluminiumbügel mit hochwertiger PulverbeschichtungZuverlässiger Schutz der Lenkerarmaturen bei StürzenAdventure Handschalen aus schlagfestem Kunststoff schützen vor Wetter, Steinschlag und ÄstenElegantes, aerodynamisches Design, mattschwarze OberflächeZusätzlicher Schutz durch separat erhältliches STURZPAD-SETMehr Witterungsschutz durch separat erhältliches ERWEITERUNGS-SETLieferumfang1 x Handprotektoren Montage-Kit1 x Adventure Handprotektor-Schalen-SetMontagematerialDetailsMaterial: Kunststoff / AluminiumFarbe: schwarz / schwarzGesamtgewicht: ca. 1,6 kgHinweisAluminiumbügel ist nicht kompatibel mit KOBRA oder BBSTORM Handprotektor-Schalen.

Adventure Set TRAX ADVDieses Set ist das Rund-um-Sorglos-Paket für jede Tour. Die wasser- und staubdichten TRAX ADV Premium-Alukoffer, zwei Seitenkoffer und ein Topcase, bieten deinem Gepäck besten Schutz. Die modellspezifische Entwicklung des abnehmbaren PRO Seitenträgers und des ADVENTURE-RACK Gepäckträgers garantieren beste Passform und den sicheren Halt der Alukoffer. Unsere robusten TRAX ADV Alukoffer überzeugen durch Stabilität, Wasser- und Staubdichtigkeit, edle Optik, durchdachte Features und eine große Auswahl an Zubehör. Für noch mehr Stauraum enthält dieses Adventure-Set zwei TRAX M/L Zusatztaschen. Diese werden auf den Seitenkoffern verschlauft, sind wasserdicht und der Inhalt wird besonders schnell erreicht.Lieferumfang1 x TRAX ADV M Alukoffer, 37,00 l, schwarz, rechts1 x TRAX ADV L Alukoffer, 45,00 l, schwarz, links1 x TRAX ADV Topcase, 38,00 l, schwarz2 x PRO Seitenträger2 x Adapterkit für PRO Seitenträger2 x Diebstahlsicherung für PRO Seitenträger1 x ADVENTURE-RACK Gepäckträger1 x Tieferlegungs-Kit für ADVENTURE-RACK Gepäckträger1 x Adapterkit für ADVENTURE-RACK Gepäckträger3 x TRAX Schloss-Satz2 x TRAX WP M/L Zusatztasche6 x Öffnungsbegrenzer3 x Aufbewahrungstaschen1 x Multitool SchlüsselanhängerTieferlegungs-Kit für ADVENTURE-RACK GepäckträgerMontagematerialDetailsMaterial: AluminiumFarbe: schwarzGesamtgewicht: ca. 32,1 kgGesamtvolumen: 150,0 l

The Airvent cover left side in Carbon for the BMW R 1250 GS Adventure from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Airvent cover right side in Carbon for the BMW R 1250 GS Adventure starting from MY 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The HP sports silencer, made entirely of titanium and carbon, is characterized by a robust sound and increased torque in the lower and mid RPM range. The powerful punch can be utilized both off-road and during overtaking maneuvers on the road. Additionally, it features an exclusive BMW Motorrad design in a hexagonal-asymmetrical shape that emphasizes its distinctive sporty appearance. The end cap and heat shield are made of carbon, making the slip-on silencer weigh only 4.3 kg, which is 0.6 kg lighter than the stock part. The side surface of the exclusive sports silencer is adorned with a laser-etched Akrapovič and HP logo. The HP sports silencer is perfectly tuned to the engine, providing an optimal level of performance output. Torque increase. Weight savings. Robust sound. Sporty appearance. Tested by BMW's development department.

With additional available headers made of the finest titanium, you can upgrade your Akrapovic Slip-On exhaust system to a full system. Make your bike something special – with more power, beautiful design, and the unique Akrapovič sound. Exhaust valve for improved drivability in the lower RPM range.Optional headers are also compatible with Akrapovič standard (factory-installed) / BMW accessory Akrapovič mufflers.When installing the optional headers E-B12E4/1, it is recommended to recalibrate the control unit to avoid the engine control light from illuminating and to achieve optimal performance and throttle response.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

Slip-ons are the first step in tuning an exhaust system, and they offer excellent value for money. Get more out of your bike, with more power, improved performance, and the unique Akrapovic sound. All combined in the stylishly designed slip-on exhaust systems. We place great importance on design – resulting in a beautifully crafted exhaust system. The muffler casing is made of titanium, and the end cap is made of carbon. Race-tested materials. The exhaust system is compatible with BMW side cases.

Mit diesem Anbausatz können Sie Ihre Touratech Werkzeugbox (01-045-5610-0) auch ohne einen Koffertäger an Ihrer GS (LC) montieren.

For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

With the comfortable backrest for the aluminum top case, the passenger enjoys more comfort both on short trips and on long tours. Increased comfort for the passenger. Reduces fatigue on long distances. Additional Information

This small but practical bag makes perfect use of the available space under the standard luggage bridge and fits individually or together with the side bags 045-5838 as if tailor-made!The attachment is done through sturdy and easy-to-mount straps, and the large, covered zipper allows for quick access to the contents.Conclusion: a small bag with great utility!-we do not use simple nylon, but certified Cordura fabric as used in motorcycle protective clothing and expedition gear-fabric inner side waterproof coated -Fluorocarbon impregnation and Teflon coating from DuPont with nano-technology as protection against moisture, dirt, oil, and fading-washable and easy to clean-the fabric used has been successfully tested for harmful substances according to Oeko-Tex Standard 100-built for extreme loads and long durability -best fit-secure attachment yet quickly removable from the vehicle-low weight with high payload and large usable volumeAttention: Please use a paint protection film if necessary! Dimensions: (L x W x H) approx. 20 x 20 x 4 cm Volume: approx. 1.5 liters.Color: black

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

Fully insulated bike battery disconnect switch for disconnecting the onboard network to preventdeep discharge of the battery due to constant consumers like clock, onboard computer,accessories, etc. during longer standstill periods.Disconnection is achieved simply by loosening the screw.Just loosen the screw by 1-2 turns and leave it in the switch. This way, it cannot be lost.For driving operation, please tighten it properly. Mini designFully insulated housingFlexible mounting between negative terminal and vehicle Load max. 160A - 12V / 10 sec. then pause for 30 sec.Bridge cable included.Installation instructions on product insert Dimensions:L / W / H: 62 x 25 x 38 mmCable: 200 mm

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

Bevel Drive Housing Protector Carbon - BMW R 1250 GS from 2019 and BMW R 1250 R and RS with splashback.The look of the carbonpart is unique and it protects the exposed spots of the bevel housing against rockfall or damage. Can be used with the rear splash guard! It will be mounted by tape which is included.   Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Bevel Drive Housing Protector Carbon - BMW R 1250 GS from 2019 without splashback.The look of the carbonpart is unique and it protects the exposed spots of the bevel housing against rockfall or damage. Can not be used with the rear splash guard!It will be mounted by tape which is included.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Our proven headlight guard made of coated, 2 mm thick stainless steel effectively protects the headlight of your GS.With the quick-release mechanism, you can easily clip on or remove the guard as needed. It is perfectly adapted to the design and functionality of the headlight. The protector has cutouts for the new X-shaped daytime running lights and is ideally suited for the optionally available cornering light from BMW.Of course, everything necessary for installation is included in the delivery.The headlight guard is designed for OFF-road use and is not permitted under the German Road Traffic Regulations (StVO). Please check your national regulations!

BMW mirror package black / silver Option 719 for R1250GS + Adventure, R1200R LC, R1250R RS including mounting parts

The BMW ConnectedRide Cradle Smartphone Holder is a mount that allows you to use your smartphone on your BMW motorcycle, particularly as a GPS. BMW part number: old 77521691964, new 77521542248 A connected BMW Connected Ride Cradle Smartphone Holder: With the BMW Motorrad Connected app (minimum version 4.0), you can view vehicle data while riding, such as: lean angle, acceleration, and deceleration. The connection and pairing are only performed once during the initial setup.If your motorcycle is equipped with a Multicontroller and the optional equipment "Onboard Computer Pro," additional functions can be utilized.When you connect your phone via Bluetooth (Bluetooth Low Energy version 4.2 minimum), you can use the application with the same controls as for the GPS Navigator VI.Once mounted on the holder, your phone will be charged, either via induction (according to Qi standard, 7.5 W max.) or via USB-C port (7.5 W, 1.5 A for 5 V). An LED display shows you the charging status, and this display can be turned off. BMW Cradle ConnectedRide Smartphone Compatibilities: The holder can be locked for additional security on compatible motorcycles.The Connected Ride Cradle BMW holder is compatible with older motorcycle models. It adapts to all models that have the preparation for GPS installed. Models with a Multicontroller have the option to retrofit the GPS preparation through the BMW Motorrad workshop system (except for the models BMW R1200RT, R1250RT, and K1600).The cradle cannot be attached to the 4-button GPS holder.It is compatible with smartphones with dimensions: minimum 130.1 x 65.5 x 6.9 mm; maximum 162.5 x 78.1 x 8.8 mm. The support sides are individually adjustable to optimally fit your smartphone. Especially during induction charging or to have an optimal and secure position, it may be necessary to remove the protective smartphone case if it is in the way.The holder is compatible with the following smartphones, for example:- iPhone: iPhone 7, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone SE 2, iPhone 12, iPhone 12 Mini, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 13, iPhone 13 Mini, iPhone 13 Pro, iPhone 13 Pro Max- Samsung: Galaxy A3, Galaxy A8, Galaxy A8 Plus, Galaxy A9, Galaxy S8, Galaxy S8 Plus, Galaxy S9, Galaxy S9 Plus, Galaxy S10, Galaxy S20, Galaxy S21 Ultra 5G, Galaxy S20 FE, Galaxy Note 8, Galaxy Note 9, Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 20 Ultra- Huawei: P20, P30- Google: Pixel 2 XL- HTC: Le More information about the BMW Motorrad Smartphone Holder: The holder has a total weight of 204 g, and its dimensions are: L: 94.8–111.85 mm x W: 144.07–180.47 mm x H: 41.02 mm. Therefore, it does not interfere with your riding or handling of the vehicle.The BMW Motorrad Smartphone Holder ConnectedRide Cradle is protected against environmental and weather conditions according to IP65 standard, making it dust and water-resistant. Ensure that your smartphone is also resistant to these elements in bad weather.Designed for use with a smartphone, the holder naturally protects your phone from motorcycle vibrations. Compatible motorcycle modelsC 400 GT - K08 - (0C06 0C16) - [2018-2020] C 400 GT 21 - K08 - (0C61, 0C63) - [2021-2022] C 400 X - K09 - (0C09 0C19) [2018-2020] C 400 X 2021 - K09 - (0C31, 0C33) [2021-2022] F 750 GS - K80 - (0B08 0B18) [2016-2022] F 850 GS - K81 - (0B09 0B19) - [2016-2022] F 850 GS ADVE - K82 - (0K01 0K03) - [2017-2022] F 900 R - K83 (0K11, 0K13) - [2019-2022] F 900 R A2 - K83 - (0K31) - [2018-2022] F 900 XR (0K21, 0K23) - [2019-2022] F 900 XR A2 - K84 - (0K41) - [2019-2022] S 1000 R - K63 - (0E51, 0E53) - [2021-2022] S 1000 XR - K49 - (0D03 0D13) - [2014-2019] S 1000 XR - K69 - (0E41 0E43) - [2019-2022] R 1200 GS 2013 - K50 - (0A01 0A11) - [2012-2016] R 1200 GS 2017 - K50 - (0A51 0A61) - [2016-2019] R 1200 GS Adve 2014 - K51 - (0A02 0A12) - [2013-2018] R 1200 R 2015 - K53 - (0A04 0A14) - [2014-2018] R 1200 RS - K54 - (0A05 0A15) - [2014-2018] R 1250 GS - K50 - (0J91 0J93) - [2018-2020] R 1250 GS 2021 - K50 - (0M01, 0M03) - [2020-2022] R 1250 GS Adve - K51 (0J51 0J53) - [2018-2020] R 1250 GS Adve 2021 - K51 - (0M11, 0M13) - [2020-2022] R 1250 R 2019 - K53 - (0J71 0J73) - [2018-2022] R 1250 RS 2019 - K54 - (0J81 0J83) - [2018-2022]

Hecktasche Soulfuel Collection Grün klein 35-42 l Die kleine Hecktasche der Soulfuel Collection gefertigt aus recyceltem Polyester und Leder ist ideal für den Wochenendtrip. Sie lässt sich - je nach Fahrzeugmodell -  auf Gepäckbrücke oder Soziussitz montieren. Praktische Features wie ein Fach für Nasswäsche oder Schuhe und Rucksacktragefunktion machen sie zu einem vielseitigen Begleiter.  Produktdetails Kleine wasserdichte Hecktasche im Retro-LookEinfache Befestigung am Fahrzeug mit verstellbaren HaltegurtenZusätzliche Haltelasche zum Aufschieben auf GepäckbrückeRutschhemmende Beschichtung am BodenBequemes Be- und Entladen dank großer, u-förmiger ÖffnungBeidseitig aufgesetzte ReißverschlussfächerAußenmaterial: 100 % PES Recyclat (recyceltes Polyester), LederMaterial für Futter und wasserdichten Innensack: 100 % PESGröße: 45 x 35 x 29/34 cmVolumen: 35 - 42 lFarbe: Grün (Stoff), Schwarz (Leder und Futter) 1x Hecktasche soulfuel collection klein (5A757A3)

Artikelnummer: 76 61 5 A82 561Praktischer Schlüsselanhänger mit GS Logo sowie Metallring mit BMW Motorrad Schriftzug.ProdukthighlightsBMW Motorrad Schriftzug mit StreifenBMW Motorrad Gravur auf dem SchlüsselringEckdatenMaterial: 100 % Baumwoll-Canvas

Artikelnummer: 76 61 5 A82 572Praktischer Schlüsselanhänger mit Make Life a Ride Schriftzug und großem, eingewebtem BMW Motorrad Schriftzug.ProdukthighlightsKleiner Make Life a Ride SchriftzugGroßer BMW Motorrad SchriftzugEckdatenMaterial: 100 % Baumwolle