BATTLAX-BT-46TOURING MOTORCYCLE TIRE   Further development of a legend with modern technology Improvements in all areas - even on wet roads Even wear  Technical Data:Width:   130 Aspect Ratio:   80 % of widthConstruction:   - (Bias tire) Rim Diameter:   17 inchesLoad Index:   65 Speed Index:   H -210 km/h Profile:   BT46 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

Machined aluminum body, adjustable spring preload and rebound (30 clicks). The locking of the spring preload is done via a set screw.   The adjustment tool is included in the delivery.  

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

n.v.

Elring Aluminum Seal Ring DIN/ISO: 7603 Shape: A-Form Material: Aluminum Thickness/Strength [mm]: 1.5 mm Outer Diameter [mm]: 22 mm Inner Diameter [mm]: 18 mm Packaging unit 100 (Price per piece packaging unit = Minimum order quantity) used among others for oil drain plugs in vehicles: BMW (G30, F90, G11, G12, G05, G15, G06) BMW MOTORCYCLES Technical Data:Range: No Inner Diameter: 18 mmOuter Diameter: 22 mmHeight: 1.5 mmMaterial: Aluminum Design: A-Form Gasoline Resistant: Yes Oil Resistant: Yes

Ball Bearing

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Battery Rubber Holder

Battery Strap Total Length: 200 mm

  Befestigung Seitenständer

Original BMW Bellows Rear Swingarm BMW Part Number: 33171452504

Bellows for Rear Swingarm

Product Description: original BMW workshop equipment Contents 50 ml 29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For professional users only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)

BMW Original Spare Part Air Filter Insert Top Brand Quality

Adjustable Footpeg Lowering Kit for BMW R100GS 92With the new footpeg adapter, no wish remains unfulfilled. We would like to point out that you can only install the adapters if you perform the drilling for the spring position on your peg yourself. As diverse as its adjustment options are, so are its applications. The adapter in its basic form fits 98% of all motorcycle models.Its adjustability is complemented by a universal adapter for 40 mm lowering. It is adjustable in increments of 4°. Generally, the basic adapter can be mounted upwards or downwards. This allows you to achieve a natural ergonomics and a healthier sitting position. The optimal leg angle is 90°. When the leg angle is bent, the blood vessels also bend, resulting in insufficient oxygen supply to the leg, which can lead to the dreaded varicose veins.After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, keeping the distance to the shift and brake lever relatively constant.Please consider that lowering the footpeg also means less lean angle. The advantage of these adapters is that the original footpeg is retained.Includes parts certificate TÜV certificate (attached here).The parts certificate includes most motorcycle models. For motorcycles not listed there, an individual inspection can be conducted. The proper installation will be checked and confirmed. The inspection costs approximately €30.00. All items have been mounted and tested on original motorcycles - without any modifications.

Vehicle-Specific Information:  Attention: The oil viscosity is 7.5W.Progressively wound fork springs from YSS, designed to be stiffer than the original. The YSS fork springs are made from high-quality silicon spring steel. This allows for a reduction in wire thickness, making the spring more active and slimmer, while effectively preventing torsion of the spring.To minimize noise and improve oil flow in the fork, the springs are fully polished and ground at both the top and bottom.The delivery includes 2 springs for a complete fork conversion.Technical Data:Spring Type:   Progressive Length:   600 mmDiameter 1:   33 mmSpring Rate 1:   5 N/mmSpring Rate 2:   8 N/mmAir Chamber Left:   160 mmAir Chamber Right:   160 mmManufacturer:   YSS

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of up to 4.5 cm. This means that some shafts are up to 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Ignition Coil Bosch

Nut

Brake Caliper Piston Repair Kit

Brake light switch / Clutch switch

Vehicle-Specific Information:  for single discSV - Friction Material CompositionFull metallic sintered material with special coating.High friction coefficient ensures very good performance.Can be used on almost all discs.Only in exchange for sintered pads in the original equipment.Only conditionally suitable for racing, as there is no heat resistance above 400 degrees.Only suitable for the front axle. Restriction BMW, brake pads for BMW R65 from 85-93 with a brake disc