The airchannel cover in carbon for the BMW R 90 T is a direct replacement for the original component.  Attention: The cover fits. without any necessary changes on the bike. from model 08/2015! It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 7 721 223 is used on the following vehicles:

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Mehr Performance und Komfort für ihre BMW RnineT /Scrambler/Urban G/S mit dem Black-T Federbein-Typ Stage3. Ob sie nun zur Kurvenhatz oder einer gemütlichen Tour mit Freunden aufbrechen, der große Einstellbereich ermöglicht eine treffendere Anpassung von Balance und Dämpfung, als dies bei den Serienkomponenten möglich ist. Das Stage3 Federbein in Emulsionsausführung kann zur Beladungsanpassung auf das große Reisegepäck per Handrad und hydraulischer Federvorspannung justiert werden. Die Zugstufeneinstellung erlaubt die nötige Feinabstimmung auf jeden Straßenzustand und Einsatzzweck. Egal ob BAB/Schnellstraßen, Bundesstraßen, kleinste Landstraßen oder flotter, ambitionierter Fahrstil. Die neue Fahrwerksdimension für ihre /Scrambler/Urban G/S ab 2016.   Wichtiges in Kürze: - Das Federbein ist auf Basis unserer Erfahrungen für die BMW RnineT konfiguriert und fahrfertig eingestellt. - Parameter sind: Fahrzeuggewicht / Anlenkung des Federbeins / bauliche Gegebenheiten / Testfahrten. - Bei allen Fahrwerkslösungen sollten Heck- und Frontbereich des Motorrads angepasst werden. - Beim Austausch nur einer Komponente, wird kein optimales Fahrverhalten erzielt.   Eigenschaften des Black-T Stage3 Federbeins: - Das Federbeingehäuse ist aus Aluminium gefertigt. - Dadurch geringst mögliches Gewicht. - Es sind Reibungsarme Spezial-Dichtungen mit integriertem Teflon-Stützring für geringen Verschleiß und lange Lebensdauer der Federbeine. - Emulsionsbauweise-Bauweise und feineres Ansprechen des Federbeins. - Große 16 mm Kolbenstange aus Chrom-Molybdän-Stahl für maximale Stabilität und Haltbarkeit - 46mm Dämpferkolben mit speziellem Touratech-Setup. - Im Federbeinauge sind stabile Edelstahlbuchsen für die Befestigungsschrauben verbaut. - Dadurch stabiler, spielfreier Sitz der Befestigungsschraube auch bei höchsten Belastungen. - Alle Bauteile und Komponenten sind auf intensiven Einsatz im Reisebetrieb ausgelegt. - Hydraulische Highend-Federvorspannung über ein gut zugänglich positioniertes Handrad. - QR-Barcode auf dem Federbein mit den individuellen Federbein-Informationen. - Voll servicefähig. Dadurch dauerhaft höchste Fahrdynamik.   Das hier verbaute Grund-Setup ist abgestimmt auf Fahrer bis 100 kg zuzüglich Motorad-Bekleidung ausgelegt. Anpassungen bei sehr viel höheren Zuladungen oder anderen außergewöhnlichen Anforderungen sind möglich. Das Federbein wird dann von uns individuell an Ihre Bedürfnisse angepasst.   Lieferumfang: - Einbaufertiges Federbein. - ABE Unterlagen - Montageanleitung / Benutzer-Handbuch   "Optional" auch mit schwarzer Austauschfeder erhältlich   Sie haben weitere Fragen? Wir beraten Sie gern persönlich kontaktieren sie uns.

This BLACK-T Stage4 shock absorber is perfectly tailored to the BMW RnineT/Urban G/S. Whether you're heading out for a twisty ride or a tour with friends, you can adjust this elegant shock absorber to suit any load and riding conditions at any time. From sporty dynamic riding to touring with a rear bag and/or passenger operation, any type of load can be compensated for by the very large adjustment range. The balance of the motorcycle can be easily and quickly restored by hand wheel through the hydraulic preload adjustment. The very finely adjustable damping at the reservoir allows for effective, precise, and personalized suspension settings tailored to your riding style at any time. For every road condition and purpose, whether on highways, federal roads, small country roads, or spirited, ambitious riding. You will experience a completely new riding sensation with your BMW RnineT /Scrambler/Urban G/S. Important points at a glance: - The shock absorber is configured based on our experiences for the BMW RnineT and is ready to install. - Parameters include: vehicle weight / linkage of the shock absorber / structural conditions / test rides. - For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. - Replacing only one component will not achieve optimal handling. The basic setup used here is designed for riders up to 100 kg plus motorcycle clothing. Adjustments for much higher loads or other exceptional requirements are possible. The shock absorber will then be individually tailored to your needs. Scope of delivery: - Ready-to-install Black-T Stage4 shock absorber. - ABE documents - Installation instructions / user manual "Optional" also available with black replacement spring Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form

Artikelnummer: 76 61 5 A82 572Praktischer Schlüsselanhänger mit Make Life a Ride Schriftzug und großem, eingewebtem BMW Motorrad Schriftzug.ProdukthighlightsKleiner Make Life a Ride SchriftzugGroßer BMW Motorrad SchriftzugEckdatenMaterial: 100 % Baumwolle

Original BMW Spare Part Part Number: 21217702595 According to the part number, it fits the following vehicles:

Original BMW Spare Parts BMW Part Number: 33177685599 , 33177685052 Fits the following vehicles:

Der sportliche Slip-on-Schalldämpfer aus Titan mit Carbon-Endkappe verleiht dem Scrambler ein besonders dynamisches Erscheinungsbild und einen kernigen Sound. Slip-on-Schalldämpfer für kernigen Sound und Gewichtsreduzierung in exklusivem Design Hoher Individualisierungseffekt mit eigenständiger Optik Langes Verbindungsrohr mit 2 Carbon-Hitzeschutzblenden Gewicht (inklusive Verbindungsrohr): 2,2 kg, Gewichtreduzierung gegenüber Serie ca. 2,6 kg Drehmoment und Leistung auf Serienniveau Akrapovič Schriftzug auf Seitenfläche gelasert Nur für Solobetrieb Optional: Abdeckung für Hauptrahmenverschraubung Schalldämpfer komplett aus Titan (Mantel, Verbindungsrohr und Innenaufbau); Endkappe aus Carbon Verbindungsrohr lang : sehr hoher Individualisierungseffekt mit eigenständiger Optik, inklusive 2 Carbon-Hitzeschutzblenden für Verbindungsrohr Inklusive Verbindungsrohr lang und Halteblech !   BMW Teilenummer : 77118564693 Passt laut Teilenummer an folgende Fahrzeuge : K21 R nineT ab 2016 K22 R nineT Pure ab 2016 K23 R nieT Scrambler ab 2016 K32 R nineT Racer ab 2016 K33 R nineT Urban G/S ab 2016

Cylinder Head Cover 2V-Style Right Unique appearance – the Cylinder Head Cover 2V-Style in retro design gives the boxer engine a distinctive look that perfectly integrates into the retro-sportive design of the machine. The cover, painted in Nürburg Silver with a cast appearance made of aluminum, allows for a clear differentiation from the standard cylinder head covers. Fits up to model year 2020. High-quality cylinder head cover made of aluminum. Striking retro design with a cast appearance. Color: Nürburg Silver. Delivery includes: One cylinder head cover including spark plug well cover and small parts.

BMW R nineT Valve Cover Set Cylinder Head Cover 2V Original BMW Accessories Can be easily replaced with the original valve covers. Kit for right and left. All mounting parts are included in the kit. Unique look – the 2V-style cylinder head cover in retro design gives the boxer engine a very individual appearance that perfectly integrates into the retro-sportive design of the machine. The cover, painted in Nürburg silver with a cast look made of aluminum, allows for a clear differentiation from the standard cylinder head covers. Fits up to model year 2020. High-quality cylinder head cover made of aluminum. Striking retro design in cast look. Color: Nürburg silver. Delivery includes: One cylinder head cover including spark plug shaft cover and small parts. R nineT R nineT Pure R nineT Urban G/S R nineT Scrambler R nineT Racer

BMW Original Spare Part Air Filter Insert Top Brand Quality

The cylinder head cover protection made of anodized aluminum protects the cylinder head cover from damage and enhances the aesthetics of the machine. This makes the motorcycle not only ready for off-road use. The cover protection emphasizes the design of the boxer engine, while the prominently embossed BMW lettering adds an additional accent. Comprehensive protection of the cylinder heads. Suitable for off-road use. Distinctive BMW lettering. Additional Information

Plenty of space for luggage. Waterproof main compartment, with external pockets. Storage volume: 40 liters, dimensions (L x W x H): 50 x 33 x 37 cm. Made from water-repellent black canvas with gray straps. Additional Information

  Piston Pin Clip   Size: 22X1.75mmTechnical Data:For Piston Pin Diameter:   22 mm

Cylinder Head Cover 2V-Style Right Unique appearance – the Cylinder Head Cover 2V-Style in retro design gives the boxer engine a very individual look that perfectly integrates into the retro-sportive design of the machine. The cover, painted in Nürburg Silver with a cast look made of aluminum, allows for a clear differentiation from the standard cylinder head covers. Compatible from model year 2021. EURO 5 High-quality cylinder head cover made of aluminum. Striking retro design with a cast look. Color: Nürburg Silver. Delivery includes: One cylinder head cover including spark plug well cover and small parts.

Let's be honest: Do you really use the DIN socket on your BMW? Simply replace it with the much more useful dual USB socket! Charge your smartphone, camera, GPS, etc. without an adapter while riding!- Input voltage: 10 to 40 V- Output voltage (USB ports): 5 V +/- 5%- Overvoltage, overheating, and short-circuit protection- Only compatible with CanBus- Port 1: 2.3 A / Port 2: 1.0 A- Intelligent device recognition: detects Apple (complies with MFi standard) or Android (BC1.2)- Weatherproof: independent port rubber covers- Plug-and-play replacement for BMW motorcycle DIN socket

The rear part for the front mudgard in our unique design for the BMW R nineT Urban GS blends into the motorcycle&rsquos overall appearance. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The fuel tank protector for the BMW R Nine T Scrambler is a direct replacement for the original component and with the weight of only 67g contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Workshop grip protectors to protect the motorcycle grips. Material: Neoprene.

Aesthetically pleasing handlebar riser for the BMW RnineT Urban G/S including brake and clutch adapterincluding ABEWe have also developed a handlebar adapter for the Urban G/S, ensuring a significantly more relaxed riding experience.Our handlebar riser features handlebar offset. The handlebar not only rises 50 mm higher, but - which is particularly advantageous - it also comes 50 mm closer to the rider.This achieves a natural ergonomics for a healthier sitting position.The brake line is routed to the right side. To keep it in this position, it is loosely secured with a cable tie.For more R nineT models see "Similar Items"The adapters are discreet and, matching the original, are anodized in silver. All items have been mounted and tested on original motorcycles - without any modifications.