Engine protection

With the RALLYE engine protection for the Honda CRF1000L Africa Twin, we combine state-of-the-art manufacturing techniques with unique design for the best possible protection. The Touratech engine crash bars provide optimal protection for the important side covers of the engine. Its slim design allows for riding challenging single trails off-road while not restricting lean angles on the road in any way.Note: Not suitable for Honda CRF1000L Africa Twin with DCTOnly in conjunction with the original exhaust manifold

Adapterkit für Kombination Original Yamaha Rohr-Schutzbügel mit H&B Motorschutzplatte (2010-2020)

Adapterset für die Montage des Motorschutz ohne Touratech Verkleidungssturzbügel.

Wird benötigt, wenn man den Hepco&Becker Sturzbügel montieren will und kein original Tankschutzbügel oder Motorschutzbügel montiert ist.  Schwarz

Wird benötigt, wenn man den Hepco&Becker Sturzbügel montieren will und kein original Tankschutzbügel oder Motorschutzbügel montiert ist.  Schwarz

Wird benötigt, wenn man den Hepco&Becker Sturzbügel montieren will und bereits die originalen Honda Zusatzscheinwerfer montiert hat.

Wird benötigt, wenn man den Hepco&Becker Sturzbügel montieren will und bereits die originalen Honda Zusatzscheinwerfer montiert hat.

Anti-Vibrationsmatte (250x200x1.6mm) zur Minimierung von Vibrationen und Stößen Speziell entwickelt für Dämpfung und Schutz zwischen Motorschutzplatte und Rahmen Reduziert unerwünschte Vibrationen während der Fahrt Verbessert den Fahrkomfort und kann die Lebensdauer von Komponenten verlängern Strapazierfähig, witterungsbeständig und einfach zu installieren Platzierung zwischen Motorschutzplatte und Motorradrahmen für effektive Vibrationsdämpfung Anti-Virbationsmatte zur Anbringung an Motorschutzplatten. Die mit Aluminiumfolie kaschierte und selbstklebende Matte verhindert bzw. mindert Vibrationsgeräusche.

The engine guard trim is an essential accessory that optimally complements and completes your motor protection system. This premium-crafted trim not only provides aesthetic improvements but also contributes to enhanced functionality. It is specifically designed to harmonize seamlessly with existing engine guards and create a unified overall appearance. The accessory stands out for its durability and easy installation, enabling quick and uncomplicated assembly. Ideal for those who want to complete and upgrade their motor protection system.

The engine guard trim is a premium protective element for motorcycles, offering reliable defense against damage and impacts. With robust construction and precise fit, this trim effectively protects your engine from collisions and scratches. German quality craftsmanship ensures durability and safety during daily use. The product features timeless aesthetics and functional design that complements both modern and classic motorcycles. Perfect for riders who value both protection and appearance on their machine.

BMW R1200GS LC Cylinder protection to black with combi original BMW engine guards BMW R1200GS from 2013 / BMW R1200GS Adventure from 2014 item Description  Easy to assemble + low weight + high protection to these challenges we have set ourselves and a cylinder protection develops all these criteria are met! Made from 3mm thick aluminum and attached to the designated points of the Touratech holding cylinder guard for the water-cooled R1200GS "Umfallern" as well as stronger was "strikes". Scratched valve cover or even holes in it belong to the past. Tested among others in Madagascar, the protection of its performance reliably demonstrated gestellt.Ein "must" for any boxer engine with its widely spread cylinders!  - can be used with original BMW engine guard werden- mounted from 3mm thick black anodized aluminum and easy to install in delivery quickly: Cylinder protection right + left, mounting hardware, installation instructions

Produktinformationen "CANYON Wasserdichte Pack- und Motortasche, Volumen 4 Liter, Befestigung am Motorschutz" Material:- Festes TPU 840D, doppelt beschichtet, wasser- und reißfest- Rutschhemmendes PVCMerkmale:- Modulares Laderaumerweiterungssystem für das M.O.L.L.E-System- Befestigung am Motorschutz mit verstellbaren Riemen mit Klemmverschluss- Aufgedruckte reflektierende Motive für erhöhte Sichtbarkeit  Weiterführende Links zu "CANYON Wasserdichte Pack- und Motortasche, Volumen 4 Liter, Befestigung am Motorschutz" Fragen zum Artikel? Weitere Artikel von GIVI

The developers at Yamaha have created a motorcycle with the new T7 that invites excursions into the terrain. Some of the positive off-road characteristics have been further improved by our Touratech developers. This engine protection is an absolute revolution! Touratech has placed great emphasis on stability and functionality. Larger damages, such as holes in the engine block, can be effectively avoided with the large Touratech engine protection.For maximum stability, the multiple contoured recesses in the 4 mm thick aluminum base plate provide one aspect, while the force of an impact is distributed over 9 mounting points thanks to two additional 4 mm stainless steel mounting plates on the engine. The ground clearance is not restricted by these two base plates.For Yamaha Tenere 700 from 2021 (Euro5)

The Touratech Engine Guard Expedition offers excellent protection against stone impacts and ground contact, effectively preventing damage. For maximum stability, the multiple folded recesses in the 4 mm thick aluminum base plate play a key role, while the force of an impact is distributed over 6 mounting points thanks to two additional 4 mm stainless steel mounting plates. The ground clearance is not restricted by these two base plates.

Professional protection for the engine and exhaust header.Multiple folded recesses ensure maximum stability in the 4mm thick aluminum base plate. A substructure distributes applied forces as widely as possible. The Touratech engine protection *Expedition* is therefore one of the most robust on the market. Ground clearance is not restricted.Plastic rails on the lower part of the base plate facilitate "sliding over" stones, rocks, or tree stumps. Almost incidentally, they also ensure that no dirt can settle.The engine protection for the 1290 Super Adventure is raised so far at the front that kicked-up stones cannot damage the engine block.

The developers at Yamaha have created a motorcycle with the new T7 that invites excursions into the terrain. Some of the positive off-road characteristics have been further improved by our Touratech developers. This engine protection is an absolute revolution! Touratech has placed great emphasis on stability and functionality. Larger damages, such as holes in the engine block, can be effectively avoided with the large Touratech engine protection.For maximum stability, the multiple contoured recesses in the 4 mm thick aluminum base plate provide one aspect, while the force of an impact is distributed over 9 mounting points thanks to two additional 4 mm stainless steel mounting plates on the engine. The ground clearance is not restricted by these two base plates.For Yamaha Tenere 700 from 2021 (Euro5)

To optimize the protection of your KTM, Touratech has developed a motor protection grid for the Touratech engine protection.The sturdy material guarantees the best possible protection and, thanks to the high-quality electropolishing, perfectly integrates into the design of the KTM.This all-around protection effectively shields the engine from stone impacts and dirt that can accumulate behind the fairing. The installation of the grid is incredibly easy - the engine protection does not even need to be disassembled.Material: 2 mm stainless steel

KTM has brought the 790's racing DNA to the streets. However, the original protection for the engine and tank is more of an aesthetic finish than real protection.This led to a comprehensive requirement profile for our engine protection "RALLYE Evo". It must be "rock-solid", look good, and should neither restrict freedom of movement nor add unnecessary weight to the vehicle.RALLYE Evo: The probably most robust engine protection in the world!The experiences from 20 years of producing many tens of thousands of engine protectors were utilized in the design and optimal sizing of the materials. Insights from years of use of our engine protectors, as well as feedback from our customers on previous generations of engine protection, were taken into account in the new RALLYE Evo engine protection.The result is a clever 3-part design. This simplifies installation and saves unnecessary additional weight. The resulting complete 360° protection ensures that even in the toughest off-road use, the engine, exhaust system, and critical areas of the tank are protected. Both stone impacts and ground contact can hardly harm your KTM 790.The 3-part design is supported by the use of two specially manufactured aluminum alloys, each optimized for its specific application area. However, they share one common feature: both are 4 mm thick.The special structure of the extended base plate, combined with the high-strength material, provides maximum rigidity up to the catalytic converter. Even in rough off-road use, it protects both the engine and the exhaust system equally. Flat approach angles facilitate overcoming obstacles of any kind, whether tree trunks or curbs. Professional robotic welding on high-quality tools ensures consistent quality.The two separately mounted tank protection plates are hydroformed for a perfect fit. They protect not only the widely protruding lower areas of the tank but also the fuel pump and fuel taps like a tank protects a turtle.The large cooling opening for improved engine cooling remains intact but can be protected from flying stones with the optionally available grids (372-5016) if needed.The simple attachment is done at suitable positions on the vehicle. A stainless steel reinforcement at the rear provides additional lateral support. The RALLYE engine protection can thus be used without restriction with most available center stands.The parallel use of Touratech crash bars is also hassle-free.In keeping with the motto: "As close-fitting as possible, as much freedom as necessary," there are no restrictions on ground clearance or lean angle freedom. Moreover, all screws are recessed in the smooth surface. This not only increases durability but also provides better handling off-road. By the way, the flat base design is also suitable for use with a maintenance stand."State of the art" technology combined with "state of the art" design100% made in Germany

The engine protection set, consisting of "Rallye Evo black engine protection" and "Stainless steel tank protection bars orange", fits all model years of the KTM 790 Adventure / R and 890 Adventure / R!RALLYE Evo engine protection, blackThe experience gained from 20 years of producing many tens of thousands of engine protectors has been utilized in the design and optimal sizing of the materials. Insights from years of use of our engine protectors, as well as feedback from our customers on previous generations of engine protection, have been taken into account in the new RALLYE Evo engine protection.The result is a clever 3-part construction. This simplifies installation and saves unnecessary additional weight. The resulting complete 360° protection ensures that even in the toughest off-road use, the engine, exhaust system, and critical areas of the tank are protected. Both stone impacts and ground contact can hardly harm your KTM 890/790.The 3-part construction is supported by the use of two specially manufactured aluminum alloys, each optimized for its specific application area. However, they share one common feature: both are 4 mm thick.The special structure of the extended base plate, combined with the high-strength material, provides maximum rigidity up to the catalytic converter. Even in rough off-road use, it protects both the engine and the exhaust system equally. Flat approach angles facilitate overcoming obstacles of any kind, whether tree trunks or curbs. Professional robotic welding on high-quality tools ensures consistent quality.The two separately mounted tank protection plates are hydroformed for a perfect fit. They protect not only the widely protruding lower areas of the tank but also the fuel pump and fuel taps like a tank protects a turtle.The large cooling opening for improved engine cooling remains intact but can be protected from flying stones with the optionally available grids (372-5016) if needed.The simple attachment is done at suitable positions on the vehicle. A stainless steel reinforcement at the rear provides additional lateral support. The Rallye engine protection can thus be used without restriction with most available center stands.The parallel use of Touratech engine crash bars is also hassle-free.True to the motto: "As close-fitting as possible, as much space as necessary," there are no restrictions on ground clearance or lean angle freedom. Moreover, all screws are recessed in the smooth base. This not only increases durability but also ensures better handling off-road. By the way, the flat base design is also suitable for use with a lift stand.RALLYE Evo - Probably the most robust engine protection in the world!"State of the art" technology combined with "state of the art" design100% made in GermanyStainless steel tank protection bars, orangeKTM follows an innovative design concept with the low-mounted tank of the 890/790 Adventure. How robust the tank really is doesn't necessarily need to be tested.The Touratech tank protection bars provide safety during your adventures, especially off-road. Even in the event of a simple tip-over, they ensure that the tank does not come into contact with the ground. The forces are effectively redirected, and not even a scratch remains on the plastic parts of your KTM.We have also relied on our proven stainless steel tubes with a diameter of 25 mm and a wall thickness of 2 mm here. These provide optimal protection and give the 890/790 a true adventure look without appearing oversized.The Touratech tank protection bars provide safety during your adventures, especially off-road. Even in the event of a simple tip-over, they ensure that the tank does not come into contact with the ground. The forces are effectively redirected, and not even a scratch remains on the plastic parts of your KTM."State of the art" technology combined with "state of the art" design100% made in Germany

als Ersatzteil bei einem Sturz Lieferumfang: 2x Crashpad (li+re) 2x Logo Blende ohne modellspezifischem Schraubensatz Info: alte Version des Pads nicht mehr verfügbar, die neue passt aber auch auf ältere Sturzbügel und ersetzt die alte Version Solltest du von alt auf neu wechseln, benötigst du neue Aluminiumhülsen. Diese sind als Zubehör hier beim Produkt hinterlegt. Welche Aluhülse du benötigst, findest du auf der Montageanleitung des jeweiligen Sturzbügels.

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können. gute Schutzwirkung bei Umfallern und Stürzen bei niedriger Geschwindigkeit Blinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschützt qualitativ hochwertige Pulverbeschichtung inkl. Anbaumaterial Für Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können. gute Schutzwirkung bei Umfallern und Stürzen bei niedriger Geschwindigkeit Blinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschützt qualitativ hochwertige Pulverbeschichtung inkl. Anbaumaterial Für Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können. gute Schutzwirkung bei Umfallern und Stürzen bei niedriger Geschwindigkeit Blinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschützt qualitativ hochwertige Pulverbeschichtung inkl. Anbaumaterial Für Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können. gute Schutzwirkung bei Umfallern und Stürzen bei niedriger Geschwindigkeit Blinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschützt qualitativ hochwertige Pulverbeschichtung inkl. Anbaumaterial Für Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]