With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

Developed for a boost in performance and torque across the entire RPM range. Featuring an outer casing made from a special high-quality titanium alloy and finished with an end cap and heat shield made of carbon. With a deep, resonant, and unique Akrapovič sound that emphasizes the sporty character of the scooter. EC/ECE type approval, and easily installed with plug-and-play functionality.EC type approval is only valid with an installed catalytic converter.

Developed for a boost in performance and torque across the entire RPM range. Featuring an outer casing made from a special high-quality titanium alloy and finished with an end cap and heat shield made of carbon. Weight reduction of 44.9 percent compared to the stock system. With a deep and unique Akrapovič sound that emphasizes the sporty character of the scooter. EC/ECE type approval, and easily installed with plug-and-play functionality.

JMP Valve Caps   - made from CNC machined aluminum - silver - including sealing ring   Dimensions L x W: 21 x 10 mm   Packaging unit 2 pieces Price per pair  

JMP Valve Caps   - made from CNC machined aluminum - silver - including sealing ring   Dimensions L x W: 15 x 10 mm   Packaging unit 2 pieces Price per pair  

Angeboten wird hier ein GebrauchtteilFahrzeug: C400X, C400GT Hersteller: BMWNeupreis: 49,91 € Zustand: normale Gebrauchsspuren, 1 leichter Kratzer, siehe Bilder Beschreibung: wird verkauft wie abgebildetTeilenummer: 46639467909

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Badge Emblem Logo D=45 mm BMW Full Fairing for example R90S Topcase F650GS... Additional Information The part with the BMW part number 52 53 2 325 201 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part / Accessory Diameter 21 mm

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Fully insulated bike battery disconnect switch for disconnecting the onboard network to preventdeep discharge of the battery due to constant consumers like clock, onboard computer,accessories, etc. during longer standstill periods.Disconnection is achieved simply by loosening the screw.Just loosen the screw by 1-2 turns and leave it in the switch. This way, it cannot be lost.For driving operation, please tighten it properly. Mini designFully insulated housingFlexible mounting between negative terminal and vehicle Load max. 160A - 12V / 10 sec. then pause for 30 sec.Bridge cable included.Installation instructions on product insert Dimensions:L / W / H: 62 x 25 x 38 mmCable: 200 mm

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

JMP Valve Caps   - made from CNC machined aluminum - black anodized - including sealing ring   Dimensions L x W: 15 x 10 mm   Packaging unit 2 pieces Price per pair  

Waterproof hand guards made of synthetic leather and neoprene with reflective elements for increased safety. The interior is equipped with thermal lining, allowing for better heat retention. Your hands stay warm.Quick and easy installation: suitable for all handlebars with handlebar ends. Features:• quick and easy installation• hassle-free access to controls • Material: synthetic leather and neoprene• durability through UV protection• increased safety through reflective elements• waterproof coating• warm fur lining• includes backpack bag   Dimensions: 50x26x36.5cm 59000

JMP Vent Screw - With cap- Color: black- Material: steel- Thread: M10X1- Total length: 29 mm

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: blue with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: gold with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

BMW C 1 125 200 Brake Disc Front or Rear Original BMW Brake Disc for the BMW C1 Scooter It fits the C1 125 and C1 200 front or rear

BMW Original Spare Part Air Filter Insert Top Brand Quality

BMW C 600 Sport C 650 GT C 650 Sport Chrome Handlebar Weight This offer includes 1 chrome handlebar weight for the BMW scooter C600Sport and C650GT. The weight is easily replaced at the end of the handlebar.

BMW Original Spare Part Air Filter Insert Top Brand Quality

JMP Connector Slotted Nut used in the following vehicles: BMW E21, E30, E36, E46, E12, E28, E34, E39, E24, E23, E38, E65, E66, E31, X3, X5, Z3, Z4 MERCEDES BENZ 170, W201, W124, T1 Bus (601, 602), W211, W461, W140, W203 Thread: M8x1.25 Wrench Size: 12.0 mm Contents: 10 Packaging Unit: 1Technical Data:Type: Thermag Slotted Nuts For Thread Size: M8 x 1.25 Self-locking: Yes Wrench Size / SW: 12.0 mmMaterial: Steel Surface: Copper-plated