BATTLAX-BT-46TOURING MOTORCYCLE TIRE   Further development of a legend with modern technology Improvements in all areas - even on wet roads Even wear  Technical Data:Width:   130 Aspect Ratio:   80 % of widthConstruction:   - (Bias tire) Rim Diameter:   17 inchesLoad Index:   65 Speed Index:   H -210 km/h Profile:   BT46 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Badge Emblem Logo D=45 mm BMW Full Fairing for example R90S Topcase F650GS... Additional Information The part with the BMW part number 52 53 2 325 201 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: blue with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: gold with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

BMW F 650 700 800 GS G650X Country Challenge Moto Large Hand Protector Attachment 71607705964 These spoilers are mounted on the original BMW hand protectors. All mounting parts are included. Kit for right and left.

BMW Original Spare Part Air Filter Insert Top Brand Quality

Von der G 650 X bekanntes und bewährtes modulares System basierend auf Handschutzbügel, mit 3 Ausbaustufen. Wirkungsvoller Schutz für Hände und Armaturen im Gelände, vor Büschen, Sträuchern, aufgewirbelten Steinen und bei Stürzen. Effektiver Wind- und Wetterschutz vor allem beim großen Handschutz in Verbindung mit Aufsatzspoiler. Leichte Montage / Demontage. Bei diesem Angebot handelt es sich um die Kunststoffschalen. Die Metallbügel müssen separat bestellt werden.

BMW G650 Xcountry Xchallenge Engine guard black Engine guards - robust, shapely protection High-quality engine bars for individualists. Whether you are the most difficult terrain, on the highway or in the city move. The engine block of your motorcycle is always effectively protected from anything untoward. More than that: in a falling over or accidental contact with the ground they can protect the driver and the bike from a bigger damage. Also useful when lashing the motorcycle when Transport.Die guard Hepco & Becker the lines of the machine are characterized by perfect and give the bike an individual character. Made of Extremely sturdy tube-in-tube construction. Depending on the vehicle type chrome or plastic-coated Stahlrohr.Die Facts • Protects at Umfallern and falls, helpful when lashing the motorcycle • Vehicle-specific development, characterized • Stable tube-in-tube design • High-quality metal coating in black, anthracite Precision engineered, easy installation, silver or white or chrome finish. depending on the model. • Comprehensive, easy-to-follow installation instructions Model: G 650 X Challenge / 2007 -> / G 650 X Country

BMW G650 Xcounty Xchallenge Porter Lock it black ( Example Picture !!! ) Porter for all Hepco & Becker side cases. Excellent fit - each carrier is exactly on the respective type of motorcycle abgestimmt.Dadurch results in a perfect registration. When designing all of the model-specific features are wiez.B. Helmet and seat lock considered. Of plastic-coated steel tube, strengthened applies on exposed areas with a special inner tube ist.Für all products: Specially designed case for Hepco & Becker Metal pipe from a German steel forge with high quality powder coating Comprehensive, easy-to-follow installation instructions Side beams can be combined with the B & H luggage bridges or Aluracks / Easy racks. What makes the Lock it Side-makers is the possibility this to disassemble in seconds. The facts: • Especially for Hepco & Becker cases and bags designed • Cases and carriers in one -no extra costs for additional adapters • Metal pipes manufactured by German steel forge with high quality chrome plating or plastic coating • Comprehensive, easy-to-follow installation instructions • side supports can with the H & B luggage rack or Aluracks combined werden.Für suited all Hepco & Becker luggage! Model: G 650 X Challenge / 2007 -> / G 650 X Country /

BMW G650 Xcountry Xchallenge Luggage rack black Proven luggage rack in pipe construction for Hepco & Becker topaz highest Qualität.Hepco & Becker luggage racks are specially designed for our topaz. You can use it every top case of us, whether aluminum or plastic, mounted on this carrier and thus have large selection of different combinations. But not only newly purchased, even existing Hepco & Becker top boxes passen.Alles what you need to mount the luggage rack of your bike is of course included enthalten.Jeder carrier is specially designed for the appropriate motorcycle and produced. Thanks to the construction of German quality steel, Hepco & Becker luggage racks ensure maximum stiffness and very high security. The high-quality metal coating, the look is also maintained in the long term. The facts: • highest safety - especially developed for Hepco & Becker top case designed • Vehicle Development • Robust and elegant design • Precision fit, easy installation • Rotating attachment for luggage straps • metal pipe from a German steel forge • High-quality metal coating • Comprehensive, easy-to-understand AnbauleitungNur for Hepco & Becker top boxes, not suitable for hand luggage! Vehicle-specific information: The luggage rack is mounted on the original bridge. Model: G 650 X Challenge / 2007 -> / G 650 X Country

Product Description: original BMW workshop equipment Contents 50 ml 29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For professional users only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Standfest. Stabil. Einfach zu bedienen. Die Hauptständer von Hepco&Becker schränken die Schräglagenfreiheit beim Fahren meist nicht ein und sind extrem robust. Dank ausgefeilter Geometrie und rutschfester Trittfläche ist es ganz einfach in jeder Situation das Motorrad sicher abzustellen.Die präzise gefertigten Ständer sind sehr stabil, sandgetrahlt, grundiert und schwarz pulverbeschichtet und daher wetter- und wertbeständig. Hauptständer vereinfachen Wartungsarbeiten und sorgen für einen sicheren Stand, z.B. beim Tanken. Beim Überwintern entlasten sie die Federelemente und das Hinterrad.ABE wird mitgeliefertmeist keine Einschränkung der Schräglagenfreiheithochwertiges OberflächenfinishLieferumfang: Hauptständer+ Montagematerial + Anleitungbitte beachten Sie die hinterlegte AnbauanleitungHilfreiches Werkzeug zum Einhängen der Zugfeder: Artikelnummer: 700030

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is simply attached to the Topcase. For this, holes need to be drilled into the Topcase. But don't worry, the installation is easy.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.