Adjustable Passenger Footpeg Lowering for BMW F800GT, F800R, F800S, F800STincluding ABEWith the footpeg adapter, no wish remains unfulfilled.As diverse as its adjustment options are, so are its applications.The adapter lowers the peg of your BMW F800 by 40 mm, higher or further. In general, the base adapter can be mounted upwards or downwards.After installation, the adapters can be adjusted so that the footpeg is positioned vertically downwards, thereby keeping the distance to the shift and brake lever relatively constant.This achieves a natural ergonomics and a healthier sitting position.The passenger even gets the benefit of adjusting the peg upwards.MV thus complements its existing program and simultaneously replaces the rigid and expensive adapters.In the case of a motorcycle change, the kit can in some cases be easily transferred.Like all adjustable products, the footpeg adapter is characterized by its "quick" adjustability. With just a few hand movements and an Allen key, the adapter can be adjusted, for example, from "high to low".The advantage of these adapters is that the original footpeg is retained.Please note, that lowering the footpeg also means less lean angle. But this adapter is adjustable. This way, you can easily find the optimal setting. All items have been mounted and tested on original motorcycles - without any modifications.

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

BMW F800GS Radiator Complete New Original BMW Spare Part Item No. 1 in the illustration

Used part, normal signs of use, see additional pictures BMW part number: 61357689832 Fits according to part number for the following vehicles:

BMW Original Spare Part Air Filter Insert Top Brand Quality

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand installation instructions scope of delivery: right + left including mounting materials and instructions please refer to the provided installation instructions or vehicle-specific notes for any restrictions or warnings no ABE or registration is required

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle a unique character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand assembly instructions Scope of delivery: right + left including mounting materials and instructions any restrictions or notes can be found in the provided assembly instructions or the vehicle-specific notes no ABE or registration required

Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our topcases. Not only new topcases fit. Older Hepco&Becker models can also be mounted. The base mount has not changed.Not compatible are: Hepco&Becker Orbit Topcase and topcases with universal plate.The carriers are model-specific and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With high-quality coating and proper care, the look is also preserved in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the topcase, but in the side cases or tank bag. usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions) including mounting materials and instructions MADE IN GERMANY the topcase is pushed onto the tube luggage rack and locked with a metal retaining lock on the carrier Luggage racks generally do not require ABE or registration

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the respective motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Use of lockable Lock-it screws not possible. Xplorer and Xceed side cases do not fit.

Product Description: original BMW workshop equipment Contents 50 ml 29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For professional users only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)

Artikelnummer: 76 61 5 A82 572Praktischer Schlüsselanhänger mit Make Life a Ride Schriftzug und großem, eingewebtem BMW Motorrad Schriftzug.ProdukthighlightsKleiner Make Life a Ride SchriftzugGroßer BMW Motorrad SchriftzugEckdatenMaterial: 100 % Baumwolle

BMW Original Repair Connector 3-Pole No. 611657 Item Description This offer includes 1 repair connector 3-pole. This offer applies to the red marked connector!!! ( Illustration No. 7 ) BMW Part Number: 83300413586 Fits various BMW motorcycles:

BMW Original Repair Connector 4-Pole No. 610615 Item Description This offer includes 1 repair connector 4-pole. This offer applies to the red marked connector!!! ( Illustration No. 5 ) BMW Part Number: 83300402340 Fits according to part number for the following vehicles: K50 (R 1200 GS)   (10/2011 — 10/2016) K51 (R 1200 GS Adventure)   (09/2012 — 10/2016) K52 (R 1200 RT)   (01/2013 — 10/2016) K53 (R 1200 R)   (11/2013 — 10/2016) K54 (R 1200 RS)   (06/2014 — 10/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 08/2016) K23 (R nineT Scrambler)   (09/2015 — 10/2016) K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010) K42 (HP4)   (09/2011 — 07/2014) K46 (S 1000 RR)   (09/2008 — 10/2016) K47 (S 1000 R)   (02/2013 — 07/2016) K49 (S 1000 XR)   (05/2014 — 09/2016) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 10/2016) K70 (F 700 GS)   (06/2011 — 10/2016) K71 (F 800 S, F 800 ST, F800GT)   (12/2004 — 09/2016) K72 (F 650 GS, F 800 GS)   (10/2006 — 10/2016) K75 (F 800 GS Adventure)   (05/2012 — 10/2016) K73 (F 800 R)   (12/2005 — 09/2016) R13 (F 650 GS, GS Dakar)   (02/1999 — 10/2007) K14 (F 650 CS)   (11/2000 — 07/2005) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 10/2016) K19 (C 650 GT)   (01/2011 — 10/2016) R13 (G 650 GS)   (02/2008 — 10/2015) R13 (G 650 GS Sertão)   (07/2010 — 11/2014) 259 (R 850 GS, R 1100 GS)   (04/1993 — 07/2006) R21 (R 1150 GS)   (09/1998 — 11/2003) R21 (R 1150 GS Adventure)   (07/2001 — 09/2005) 259R (R 850 R, R 1100 R)   (09/1993 — 11/2002) 259 (R 850 RT, R 1100 RT)   (05/1994 — 11/2001) R28 (R 850 R, R 1150 R, Rockster)   (11/1999 — 07/2007) R22 (R 850 RT, R 1150 RT, R 1150 RS)   (01/2000 — 03/2006) 259C (R 850 C, R 1200 C)   (04/1996 — 07/2004) 259 (R 1100 S, R 1100 RS)   (01/1992 — 07/2005) 259C (R 1200 C Montauk)   (10/2002 — 10/2004) 259C (R 1200 C Independent)   (05/2000 — 08/2004) K30 (R1200 CL)   (10/2001 — 07/2004) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K 1200 RS, K 1200 LT)   (04/1996 — 07/2008) K41 (K 1200 GT, K 1200 RS)   (03/2000 — 07/2005) C1   (10/1999 — 04/2003)

BMW Original Rear Brake Disc NEW Item Description This offer includes 1 rear brake disc . This offer applies to the item in the red marked circle!!! ( Image No. 1 ) BMW Part Number: 34217664102 Fits according to part number for the following vehicles: R 1200 GS 04 R 1200 GS 08 R 1200 GS 10 R 1200 GS Adventure 06 R 1200 GS Adventure 08 R 1200 GS Adventure 10 HP2 Enduro HP2 Megamoto R 1200 RT 05 R 1200 R 10 R 900 RT 05 SF R 900 RT 10 SF R 1200 R 06 R 1200 R 11 R nineT R nineT Scrambler K 1200 S K 1300 S K 1200 R K 1200 R Sport K 1300 R S 1000 XR F 700 GS F 700 GS 17 F 800 GT F 800 S F 800 ST F 650 GS F 800 GS 08 F 800 GS 13 F 800 GS 17 F 800 GS Adventure F 800 GS Adventure 16 F 800 R F 800 R 15

The brake lever cap increases the reachable area of the foot brake and extends it by 15 mm. It is suitable for brake levers with a round body of Ø 17 mm.Easy installation. Simply slide on and tighten the set screw.Length approx. 6.5 cm, inner Ø 17 mmColor silver All items have been mounted and tested on original motorcycles - without any modifications.

C-Bow Seitentaschenhalter für BMW F 800 S (2006-2011)/F 800 ST (2006-2012) ist für die Aufnahme einer Vielzahl von Hepco&Becker Taschen vorgesehen. Softbags für sportlich-dynamische Motorräder und Satteltaschen für Chopper und Cruiser können mit dem C-Bow Halter am Motorrad befestigt werden. Sein elegantes, unaufdringliches Design fügt sich perfekt in die Gesamtlinie des Fahrzeugs ein. Natürlich hält er die Satteltaschen sicher vom heißen Auspufftopf fern. Dank moderner C-Bow Technik lassen sich die passenden Taschen einfach und unkompliziert mit nur einem Klick am C-Bow befestigen und diebstahlsicher verriegeln. Die Taschen sind sicher am Motorrad befestigt und bleiben auch bei Beladung in Position. Bei vielen Modellen verbleiben die Blinker in ihrer Originalposition. Weitere Informationen finden Sie in der Anbauanleitung.solider Seitenträger zur Aufnahme von Hepco&Becker C-Bow Seitentaschen und Koffernhochwertiges Oberflächenfinishnormale Hepco&Becker Hartschalenkoffer, wie die Junior oder Journey passen nicht!Krauser K-Wing Koffer passen nicht an den C-Bow Träger!Empfohlene Zuladung: 5kg je Tasche/Koffer (bitte beachten Sie die Montageanleitung, fahrzeugspezifische Hinweise, sowie Motorradherstellerangaben für evtl. auftretende Einschränkungen)meist ohne Probleme mit Topcaseträger, Sissybar, oder Solorack kombinierbar (beachten Sie die Anbauanleitung oder die fahrzeugspezifischen Hinweise beim jeweiligen Träger)Gepäckbrückenverbreiterungen können die Taschenmontage am Träger einschränkenGepäckträger benötigen keine ABE oder Eintragung in die Papiere Lieferumfang: links, rechts, Anbaumaterial und AnleitungEntwickelt für den Serienzustand der Maschine. Nicht getestet mit Zubehörartikeln wie z.B: Auspuff, Kennzeichenhalter oder anderen Blinkern. Beachten Sie, dass die Taschen bei Fremdzubehör immer ausreichend Abstand zum Auspuff und die Blinker einen ausreichenden Abstrahlwinkel haben. Der Abgasstrahl darf nicht auf die Taschen gerichtet sein.

The side covers under the seat for the BMW F 800 R (2012-2015) / S (2006-current) / ST (2006-current) / GT (2012-current) in carbon are shaped to cover as much of the original tank, which is made of black plastic, as possible. This product enhances the vehicle and provides additional protection against damage. The installation of the parts is done using the included adhesive strips and/or by utilizing the original mounting points. The carbon part has been completely manufactured from prepreg material (see FAQ) in an autoclave according to the latest guidelines and, as is customary with us, has been coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. Not only does the coating excel technically, but it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The carbon timing belt drive cover for the BMW F 800 R (2009-2015) / S (2006-current) / ST (2006-current) / GT (2012-current) replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part has been completely manufactured in the autoclave from prepreg material (see FAQ) according to the latest guidelines and, as is customary with us, coated with a clear plastic layer for protection against environmental influences in the next step. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

Let's be honest: Do you really use the DIN socket on your BMW? Simply replace it with the much more useful dual USB socket! Charge your smartphone, camera, GPS, etc. without an adapter while riding!- Input voltage: 10 to 40 V- Output voltage (USB ports): 5 V +/- 5%- Overvoltage, overheating, and short-circuit protection- Only compatible with CanBus- Port 1: 2.3 A / Port 2: 1.0 A- Intelligent device recognition: detects Apple (complies with MFi standard) or Android (BC1.2)- Weatherproof: independent port rubber covers- Plug-and-play replacement for BMW motorcycle DIN socket