K60 Scout Winter Tire The K60 Scout is an all - Enduro tires, in terms of wet grip and cornering stability he provides a further improvement in driving properties ermöglicht.Durch the high negative portion of the profile high traction off the beaten track. By modifying certain profile elements, an optimized design of the tire carcass and an improved tread compound of the Scout achieved especially in cornering a very high stability and is more secure due to the higher wet grip in road use.

K60 SILICA   The K60 Silica achieves excellent traction values on cold and wet roads through the use of high-quality silica compounds. The combination of the coarse tread pattern with this special rubber mixture allows for outstanding performance in winter conditions.Technical Data:Width:   130 Aspect Ratio:   80 % of widthConstruction:   - (Diagonal tire) Rim Diameter:   17 inchesLoad Index:   69 Speed Index:   T -190 km/h Tread:   K60 Special Marking:   M+S Manufacturer:   Heidenau Whitewall:   No Tube Type:   TT Reinforced:   Yes Tire Type:   Winter tire

Original BMW Spare Part Badge Emblem Logo D=45 mm BMW Full Fairing for example R90S Topcase F650GS... Additional Information The part with the BMW part number 52 53 2 325 201 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 7 686 746 is used on the following vehicles:    

Original BMW Spare Part / Accessory Diameter 21 mm

Original BMW Spare Part / Accessory Diameter 41 mm

Quality ball bearings from SKFTechnical Data:Design:   Deep groove ball bearing Type:   6203 Inner diameter:   17.00 mmOuter diameter:   40.00 mmWidth:   12.00 mmSealing:   2 sealing discs Clearance:   Increased clearance (C3)

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

JMP Vent Screw - With cap- Color: black- Material: steel- Thread: M10X1- Total length: 29 mm

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: blue with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: gold with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand installation instructions Scope of delivery: right + left including mounting materials and instructions any restrictions or notes can be found in the provided installation instructions or the vehicle-specific notes no ABE or registration required

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are offered. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand installation instructions scope of delivery: right + left including mounting materials and instructions please refer to the provided installation instructions or vehicle-specific notes for any restrictions or warnings no ABE or registration required

The fixed side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is screwed onto the rear right and left of the carrier and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tube MADE IN GERMANY Firmly bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please observe model-specific notes from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 ltr. & 40 ltr. in combination. Indicators remain in their original position.

Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our topcases. But not only new topcases fit. Older Hepco&Becker models can also be mounted. The basic mount has not changed.Not compatible are: Hepco&Becker Orbit Topcase and topcases with universal plate.The carriers are model-specific and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With high-quality coating and proper care, the look is also maintained in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the topcase, but in the side cases or tank bag. usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions) including mounting materials and instructions MADE IN GERMANY the topcase is pushed onto the tube luggage rack and locked with a metal retaining lock on the carrier Luggage racks generally do not require ABE or registration Vehicle-specific notes: Our luggage rack is mounted on the original rack. The topcases equipped with a metal retaining lock from HEPCO&BECKER can be attached to it.

BMW original Ersatzteil Öldruckschalter Top Markenqualität Passt an folgende Fahrzeuge: F 650 F 650 ST F 650 GS F 650 GS Dakar

Product Description: original BMW workshop equipment Contents 50 ml 29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For professional users only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)

Angeboten wird hier ein GebrauchtteilFahrzeug: E169 F650 F650STHersteller: BMWZustand: deutliche GebrauchsspurenBeschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen , RostTeilenummer: 35212345682

Angeboten wird hier ein GebrauchtteilFahrzeug: E169 F650 F650STHersteller: BMWZustand: deutliche GebrauchsspurenBeschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen , RostTeilenummer: 35212345682

Angeboten wird hier ein GebrauchtteilFahrzeug: E169 F650 F650STHersteller: BMWZustand: deutliche GebrauchsspurenBeschreibung: wird verkauft wie abgebildet, Rost, Stärke: 4,9mm (Grenze: 4,5mm)Teilenummer: 34212345323

JMP starter brushes for Japanese motorcycles. As original spare parts, starter brushes are usually onlydelivered completely mounted on a base plate and aretherefore very expensive. 12.0 x 8.9 x 5.9 mm

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.