For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

Lithium-Ion Battery with Overcharge Protection from Skyrich Skyrich is a premium manufacturer and series supplier for renowned brands such as KTM and Ducati. The Power Sports Lithium-Ion batteries of the LTM-Line feature a heat-resistant, waterproof nylon casing and improved terminal connections. Overcharge Protection (OP) The Skyrich battery is equipped with an advanced battery management system (BMS), which, in addition to balancers (ensuring even charging/discharging of the battery), also includes overcharge protection. This prevents the battery from being charged with a voltage exceeding 14.9V.   Spacer (S) The battery is equipped with one or more spacers that can be adhered under the battery with the included adhesive tape, ensuring the battery fits precisely in the battery compartment.  Waterproof (WP) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.  Indicator (I) All batteries are equipped with an improved state-of-charge indicator, which displays the battery's charge status even more accurately. By replacing a standard lead-acid battery with a Skyrich Lithium-Ion battery, up to 5 kg of weight can be saved with minimal effort. The following advantages speak for Skyrich Lithium-Ion batteries: - integrated overcharge protection- approximately 1/3 the weight of comparable lead-acid batteries- improved brass terminal connections for optimal conductivity- waterproof- completely black battery casing- nylon battery casing, thus deformation due to heat is practically excluded- unbeatable cost/weight-saving ratio- can be installed in any position, as it contains no acid- contains no heavy metals- balanced discharge/charge of all cells through balancers- fast charging with high current possible (up to 90% in 6 min)- very low self-discharge (max. 5% per month)- still good performance at high temperatures up to 60°C- safe technology and long lifespan  Lead-acid batteries can only utilize 30% of their capacity due to their specific characteristics, while Lithium-Ion batteries can use nearly 100% of their capacity. For this reason, the lithium versions of Skyrich batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. The dimensions of the Lithium-Ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications.  Please note that only suitable chargers should be used for charging. We recommend JMP chargers.The maximum recommended charging currents can be found in the technical specifications below. Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging.  The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.  TechnologySkyrich Lithium-Ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions.The technology and manufacturing process guarantee the highest safety standards for lithium batteries.   - 12 V maintenance-free Lithium-Ion battery- Recommended charging current 2 A- Maximum charging current for fast charging 20 A    Equivalent to:   YB14-A2 YT12B-BS YTX14AH-BS YB10A-A2 YB14A-A2 12N12A-4A1 YB14A-A1 YB12A-B HVT-9 YB12C-A YT14B-BS YB14-B2 YB12B-B2 YTZ10S YB12A-ATechnical Data:Voltage:   12v Capacity:   4 Ah (10 hrs)Energy Output:   48 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps according to Manufacturer:   240 ALength:   134 mmWidth:   65 mmHeight:   92 mmReady-to-use Weight:   0.9 kgAcid Pack Included:   No Connection Type:   Top    Front Positive Terminal:   Front Left Negative Terminal:   Front Right Gas Venting:   None Manufacturer:   Skyrich

JMT Lithium-ion batteries, high-tech for your motorcycle.   Batteries of the latest generation identifiable by the red housing cover.   Waterproof (W) The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure.   Indicator (I) All batteries are equipped with a battery status indicator. Simply press the test button. If all 3 blue LEDs light up, the battery is fully charged (ful). If only 2 LEDs light up, it is only half charged (med). When only one LED lights up (low), the battery needs to be charged.   By replacing a standard lead-acid battery with a JMT lithium-ion battery, up to 5 kg of weight can be saved without significant effort.   The following advantages speak for JMT lithium-ion batteries: - about 1/3 the weight of comparable lead-acid batteries - unbeatable cost/weight savings ratio - can be installed in any position, as no acid is contained - contains no heavy metals - balanced discharge/charge of all cells through balancer - fast charging with high charging current possible (up to 90% in 6 min) - very low self-discharge (max. 5% per month) - still good performance at high temperatures up to 60°C - safe technology and long lifespan   Lead-acid batteries can only utilize 30% of their capacity due to specific properties, while lithium-ion batteries can utilize nearly 100% of their capacity.   For this reason, the lithium versions of JMT batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. A uniform state of charge of all cells is also ensured by a built-in processor ("balancer"). The dimensions of the lithium-ion batteries match the dimensions of the original lead-acid batteries with the help of adapters. The connections are also identical, allowing the battery to be replaced in just a few minutes without further adjustments.   Please note that only suitable chargers may be used for charging. We recommend JMP chargers. The maximum recommended charging currents can be found in the technical data below.     Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before they begin the actual charging. The maximum charging voltage of 14.9 volts must not be exceeded under any circumstances.   The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius.   Technology JMT lithium-ion batteries use iron phosphate (LiFePO4) as cathode material and employ the lithium-polymer process in manufacturing. This means they cannot catch fire or explode under normal operating conditions. The technology and manufacturing process ensure the highest safety standards for lithium batteries.       - 12 V maintenance-free lithium-ion battery - Recommended charging current 2 A - Maximum charging current for fast charging 20 A     Comparable in dimensions and connections with: Yuasa Part No. YTZ10S Yuasa Part No. TTZ10S Technical Data:Voltage:   12v Capacity:   4 Ah (10 hrs)Energy Output:   48 WhDesign:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps according to manufacturer:   240 ATesting Standard of the Manufacturer:   SAE Cold Cranking Amps measured in (SAE) with JJM 609.00.66:   350 ACold Cranking Amps measured in (DIN) with JJM 609.00.66:   325 ACold Cranking Amps measured in (EN) with JJM 609.00.66:   195 ALength:   150 mmWidth:   87 mmHeight:   93 mmWeight ready for use:   0.8 kgAcid pack included:   No Connection Type:   from above    from the front Positive Terminal:   front left Negative Terminal:   front right Gas Vent:   None Manufacturer:   JMT

Notice: No sales to private individuals The battery acid (sulfuric acid 37%) is classified as a restricted substance for explosives according to EU 20197/1148. We would like to inform you as a business participant that the acquisition, transport, possession, and use of this substance by members of the public is subject to restrictions according to Article 5, paragraphs 1 and 3. JMT maintenance-free (MF) motorcycle battery   - Maintenance-free starter battery in proven and reliable brand quality. - Up to 3x longer lifespan and increased cold start performance compared to standard batteries. - Leak-proof, as the included fleece completely binds the electrolyte. - Dry unfilled - Vibration resistant - No need to refill distilled water, making the battery completely maintenance-free. - TTZ series allows for any possible installation position except for mounting upside down due to its innovative design of the housing cover and the position of the safety valve.- An acid pack with the appropriate amount of acid for filling is included in the delivery.   Technical Data:Voltage:   12v Capacity:   8.6 Ah (10 hrs)Design:   Maintenance-free Activated:   No Cold cranking current according to manufacturer:   190 AManufacturer's test standard:   SAE Cold cranking current in (SAE) measured with JJM 609.00.66:   305 ACold cranking current in (DIN) measured with JJM 609.00.66:   280 ACold cranking current in (EN) measured with JJM 609.00.66:   170 ALength:   150 mmWidth:   87 mmHeight:   93 mmWeight ready for operation:   3 kgAcid pack included:   Yes Acid volume:   0.43 LConnection type:   from above    from the front Positive terminal:   front left Negative terminal:   front right Gas outlet:   None Manufacturer:   JMT

Notice: No sales to private individualsThe battery acid (sulfuric acid 37%) is classified as a restricted substance for explosives according to EU 20197/1148.We would like to inform you as a business participant that the acquisition, transport, possession, and use of this substance by members of the general public is subject to restrictions according to Article 5, paragraphs 1 and 3.   Yuasa Maintenance-Free Motorcycle Battery High-Performance   - Maintenance-free high-performance starter battery in reliable brand quality - Leak-proof due to AGM technology (Absorbed Glass Mat) - Leak-proof pressure relief valve prevents ignition of the electrolyte under overpressure - Vibration resistant - Up to 3x longer lifespan compared to standard batteries - Advanced lead-calcium technology increases starting power - Sulfate-stop significantly reduces plate sulfation - Maintenance-free batteries do not require topping up with distilled water - Heat-sealed battery case prevents leaks and corrosion - The high-performance battery features up to 30% higher cold start performance due to a star-shaped grid design and additional plates - An acid pack with the appropriate amount of acid for filling is included in the delivery       WARNING!!! Please note when installing the TTZ battery that the maximum tilt angle is 30° horizontally and 20° vertically. It must not be installed lying down.   Equivalent WPZ 10 S-BS YTZ10S    Technical Data:Voltage:   12v Capacity:   8.6 Ah (10 hrs)Energy Output:   103.2 WhDesign:   Maintenance-free Activated:   No Cold Cranking Amps (CCA) according to manufacturer:   190 AManufacturer's test standard:   SAE Cold Cranking Amps (SAE) measured with JJM 609.00.66:   410 ACold Cranking Amps (DIN) measured with JJM 609.00.66:   380 ACold Cranking Amps (EN) measured with JJM 609.00.66:   230 ALength:   150 mmWidth:   87 mmHeight:   93 mmWeight (ready for use):   3.2 kgAcid pack included:   Yes Acid volume:   0.4 LConnection type:   from above    from the front Positive terminal:   front left Negative terminal:   front right Gas outlet:   None Manufacturer:   Yuasa

JMT maintenance-free (MF) motorcycle battery gel - Maintenance-free JMT starter battery in proven and reliable brand quality.- The battery is already filled with a gel electrolyte and is therefore completely leak-proof.- Longer lifespan, increased cold start performance, and lower self-discharge compared to standard batteries.- Vibration resistant Equivalent to: GS manufacturer number GTZ10STechnical Data:Voltage: 12v Capacity: 8.6 Ah (10 hrs)Energy output: 103 WhDesign: Gel Maintenance-free Activated: Yes Cold test current according to manufacturer: 190 AManufacturer's test standard: SAE Cold test current measured in (SAE) with JJM 609.00.66: 120 ALength: 151 mmWidth: 87 mmHeight: 94 mmWeight ready for operation: 2.9 kgAcid pack included: No Connection type: from above from the front Positive terminal: front left Negative terminal: front right Gas outlet: None Manufacturer: JMT

Yuasa Maintenance-Free Motorcycle Battery High-Performance - Maintenance-free high-performance starter battery in reliable brand quality - Leak-proof due to AGM technology (Absorbed Glass Mat) - Leak-proof pressure relief valve prevents ignition of the electrolyte under pressure - Vibration resistant - Up to 3x longer lifespan compared to standard batteries - Advanced lead-calcium technology increases starting power - Sulfate-stop significantly reduces plate sulfation - Maintenance-free batteries do not require topping up with distilled water - Heat-sealed battery case prevents leaks and corrosion - The high-performance battery features up to 30% higher cold start performance due to a star-shaped grid design and additional plates - The battery is factory-filled and charged with acid Equivalent to: GS Manufacturer Number GTZ10S Technical Data:Voltage: 12v Capacity: 8.6 Ah (10 hrs)Energy Output: 103.2 WhDesign: Maintenance-free Activated: Yes Cold Cranking Amps (CCA) according to manufacturer: 190 AManufacturer's Test Standard: SAE Cold Cranking Amps measured in (SAE) with JJM 609.00.66: 190 ALength: 150 mmWidth: 87 mmHeight: 93 mmWeight Ready for Use: 3.2 kgAcid Pack Included: No Connection Type: Top Front Positive Terminal: Front Left Negative Terminal: Front Right Gas Venting: None Manufacturer: Yuasa

Lithium-Ion Battery by Skyrich Skyrich is a premium manufacturer and series supplier for renowned brands such as KTM, Ducati, and Honda, among others. The Power Sports Lithium-Ion Batteries of the LTM-Line feature a heat-resistant, waterproof nylon casing and improved, stronger terminal connections. By replacing a standard lead-acid battery with a Skyrich Lithium-Ion battery, up to 5 kg of weight can be saved with minimal effort. Spacer (S):The battery is equipped with one or more spacers that can be adhered under the battery with the included adhesive tape to ensure a perfect fit in the battery compartment. Waterproof IP65 (W):The battery is completely waterproof and will not be damaged when the motorcycle is cleaned with high pressure. Indicator (I)All batteries are equipped with an enhanced state-of-charge indicator that displays the battery's charge level more accurately. The following advantages speak for Skyrich Lithium-Ion batteries:- integrated overcharge protection- approximately 1/3 the weight of comparable lead-acid batteries- improved brass terminal connections for optimal conductivity- waterproof- black battery casing with green lid- nylon battery casing, thus deformation due to heat is virtually excluded- unbeatable cost/weight-saving ratio- can be installed in any position, as it contains no acid- contains no heavy metals- balanced discharge/charge of all cells through balancer- fast charging with high current possible- very low self-discharge (max. 5% per month)- still good performance at high temperatures up to 60°C- safe technology and long lifespan Lead-acid batteries can only utilize 30% of their capacity due to their specific properties, while Lithium-Ion batteries can use nearly 100% of their capacity.For this reason, the Lithium versions of Skyrich batteries require only 1/3 of the capacity of a comparable lead-acid battery for the same starting performance. The dimensions of the Lithium-Ion batteries match the dimensions of the original lead-acid batteries with the help of adapters.The connections are also identical, allowing the battery to be replaced in just a few minutes without further modifications. Please note that only suitable chargers may be used for charging. We recommend JMP chargers.The maximum recommended charging currents can be found in the technical specifications below.Under no circumstances should chargers be used that attempt to desulfate deeply discharged batteries below 10 volts with a voltage of more than 14.9 volts before starting the actual charging process.The manufacturer guarantees sufficient starting capacity down to -5 degrees Celsius. TechnologySkyrich Lithium-Ion batteries use iron phosphate (LiFePO4) as the cathode material and employ the lithium polymer process in manufacturing. This ensures that they cannot catch fire or explode under normal operating conditions.The technology and manufacturing process guarantee the highest safety standards for lithium batteries. - 12 V maintenance-free Lithium-Ion battery- Recommended charging current 2 A- Maximum charging current for fast charging 20 ATechnical Specifications:Voltage:   12v Capacity:   4 Ah (10 hrs)Energy Output:   48 WhType:   Lithium    Maintenance-free Activated:   Yes Cold Cranking Amps (CCA) according to manufacturer:   280 AManufacturer's Testing Standard:   SAE Length:   150 mmWidth:   87 mmHeight:   93 mmWeight Ready for Use:   0.9 kgConnection Type:   Top    Front Positive Terminal:   Front Left Negative Terminal:   Front Right Manufacturer:   Skyrich

For the individual installation of this cigarette lighter socket, you can use the integrated mounting bracket and the included cable ties. If your handlebars do not provide enough space, simply use the included extra-narrow handlebar mount. Of course, installation in the fairing is also possible.The spring-loaded cover does not flap in the wind and provides weather protection. The 7.5 A fuse can be mounted freely at the most convenient point in the wiring. The small hole at the bottom of the housing prevents moisture from forming in the socket.- Compact design- Flat spring-loaded cover- Long connection cables: 1.3 m- Integrated holding bracket- Extra-narrow handlebar mount- Option for fairing installation (27 mm)- Includes 7.5 A fuse