These progressive fork springs are perfectly suited to the requirements of the fork for the Honda NC750S. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for * Honda NC750S 2012-2017*For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the Honda NC 750 S are:=> Touratech Suspension Shock Absorber for Honda NC 750 S Type Level2 01-405-5865-0=> When replacing only one component, optimal handling will not be achieved.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.

These progressive fork springs are perfectly suited to the requirements of the fork for the Honda NC 750 X. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for *Honda NC750X 2012-2015*For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> The suitable components for the rear of the Honda NC750X are:=> Touratech Suspension shock absorber for Honda NC 750 X Type Level2 01-405-5855-0=> When replacing only one component, optimal handling will not be achieved.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the fork tubes.

These progressive fork springs are perfectly suited to the requirements of the fork for the KTM 1190 Adventure. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for * KTM 1190 Adventure from 2013 *The fork springs can be used with or without ESA equipment.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the inner tubes.

A lowering of the front with replacement fork springs from the Dutch suspension specialist Hyperpro. With this spring set, you achieve a sensible lowering of -35mm without compromising handling characteristics - of course, some ground clearance is lost. The progressive springs are perfectly tuned to the Yamaha 700 Tenere and offer significantly improved responsiveness and higher safety in the limit range compared to the original fork springs. Info: Fits only for * Yamaha 700 Tenere from 2019*For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> When replacing only one component, optimal handling is not achieved.=> You can find the matching components for your Yamaha 700 Tenere in the accessories of this article. “Please scroll down”Delivery includes:- Fork springs.- Replacement spring for the original shock absorber.- including detailed installation instructions.- suitable fork oil.- Paste to improve the sliding properties of the fork tubes. - Installation instructions with setup information, Our recommendation: Have the conversion carried out by a specialist workshop.Do you have further questions? We are happy to advise you personally, please contact us

These progressive fork springs are perfectly tailored to the requirements of the fork for the Yamaha 700 Tenere. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for *Yamaha 700 Tenere from 2019*For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable components for the rear of the Yamaha 700 Tenere in our accessory recommendations. When replacing only one component, optimal handling is not achieved.Our recommendation: Have the conversion carried out by a specialist workshop.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the sliding properties of the inner tubes.Do you have further questions? We are happy to advise you personally, please contact us.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the Yamaha 700 Tenere. The shock absorber and the fork have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for *Yamaha 700 Tenere from 2019*Delivery includes: - Fork springs.- Replacement spring for the original shock absorber.- including detailed installation instructions.- suitable fork oil.- Paste to improve the sliding properties of the inner tubes.Our recommendation: Have the conversion carried out by a specialist workshop.Do you have further questions? We are happy to advise you personally, please contact us

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the Honda XL600V Transalp. The shock absorber and the fork have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for * Honda XL600V Transalp *Delivery includes: detailed installation instructions.Our recommendation: Have the conversion carried out by a professional workshop.Do you have further questions? We are happy to advise you personally, please contact us.

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the KTM 1050 Adventure. The shock absorber and the fork have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for * KTM 1050 Adventure from 2015*Delivery includes: detailed installation instructions.Our recommendation: Have the conversion carried out by a specialist workshop.Do you have further questions? We are happy to advise you personally, please contact us

These progressive replacement springs are perfectly tuned to the fork and shock absorber of the Suzuki V-Strom 1000. The shock absorber and the fork provide a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The replacement springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for *Suzuki V-Strom 1000 from 2014*Delivery includes: detailed installation instructions.Our recommendation: Have the conversion carried out by a professional workshop.Do you have further questions? We are happy to advise you personally, please contact us

Protects the lower end of the clutch cable and the exposed mechanism from damage while also being a visual treat. The aluminum guard is easy to install, resistant to rust, and easy to maintain.

Protects the lower end of the clutch cable and the exposed mechanism from damage while also being a visual treat. The aluminum guard is easy to install, resistant to rust, and easy to maintain.

The side stand switch is often overlooked.Only when it can no longer perform its function and the machine refuses to start, does it become apparent that this component is of enormous importance!For this reason, we have provided the side stand switch with a stainless steel protection.Effective and technically as well as aesthetically matching for the KTM 790!

The Rack Pack with the proven roll closure keeps the contents absolutely waterproof and is the all-time favorite of every adventure biker. The inner pockets allow for quick access to notebooks and other small items without having to empty the entire bag for the trip. The mesh pocket on the outside holds items that don't necessarily need to be waterproof but must be easily accessible. The reflectors on the sides provide passive safety. With a volume of approximately 50 liters, the bag offers enough space for the next tour. The optional carrying strap (055-1621) makes it a universally usable travel bag.Touratech Waterproof EXTREME Edition The new product line from Touratech combines everything you could wish for from waterproof soft luggage: The bags are extremely robust – they can easily withstand a fall. The bags are, of course, extremely waterproof, no matter from which direction the rain comes. The extremely high quality is evident in the workmanship, fit, and durability. In addition, the bags feature an extreme design with many practical features and a distinctive color scheme – black on the outside and yellow on the inside to make it easier to find the contents.The specially developed material mix not only offers a unique tactile experience. It is both a promise and a trademark: Whether on-road or off-road; UV rays, rain, or snow; the EXTREME Edition from Touratech Waterproof can handle it all.Start your adventure now with the Touratech Waterproof EXTREME Edition!

The radiator of the Explorer three-cylinder is relatively large and therefore susceptible to stone chips and dirt. The original plastic radiator guard only partially fulfills its protective function on rough gravel roads, which is why we recommend replacing it with an aluminum radiator guard. The Touratech radiator guard for the Triumph Tiger Explorer offers perfect protection against stone chips and blends inconspicuously into the vehicle's appearance due to the use of black anodized, laser-cut aluminum. The attachment is done at existing screw points.Under unfavorable conditions, such as high outside temperatures and full load, the radiator cover can cause temperature problems for the engine.

The Touratech radiator guard protects the vulnerable fins of the radiator from damage, providing a significant increase in safety!Flying stones, sticks, or other debris lose their threat. Your journey will be much safer with minimal effort!Visually discreet yet unmistakably in the Touratech style, the radiator guard made of laser-cut aluminum fits perfectly into the design of the 1290.Color: blackScope of delivery: 2 parts (left and right)Note: Covering the radiator can cause temperature issues for the engine under unfavorable conditions, at high outside temperatures, and under full load.Please pay attention to your water temperature gauge.

The Touratech radiator guard protects the vulnerable fins of the radiator from damage, providing a significant increase in safety!Flying stones, sticks, or other debris lose their threat. Your journey will be much safer with minimal effort!Visually discreet yet unmistakably in the Touratech style, the radiator guard made of laser-cut aluminum integrates perfectly into the design of the Yamaha.Note: Covering the radiator can cause temperature issues for the engine under unfavorable conditions, at high outside temperatures, and at full load. Please pay attention to your water temperature gauge.

With the RALLYE EXTREME engine protection for the Honda CRF1000L Africa Twin, we combine state-of-the-art manufacturing techniques with unique design for the best possible protection of the entire engine area on your bike! Under the toughest testing conditions, the RALLYE EXTREME engine protection has already proven its quality on the winning motorcycle of the Hellas Rallye.The engine protection stylishly integrates into the lines of your motorcycle. Thanks to innovative manufacturing technology, it comes without disruptive weld seams, which are often perceived as weak points. The integrated recesses on the underside not only look good; they provide robust stiffness to the shock-absorbing and lightweight aluminum when the protection needs to live up to its name. Additionally, the two parallel recesses allow the bike to glide over obstacles effortlessly. This effectively dissipates the impact energy and prevents jamming or getting stuck.Decide which of the four variants is right for you!The RALLYE EXTREME engine protection is designed for tough use with minimal weight. It takes on the functions of the engine crash bars. We have also consciously opted for compatibility with the original Honda decorative frame in the RALLYE EXTREME. For the Africa Twin with DCT, original Honda decorative frame, or the Touratech engine crash bars, please order the RALLYE engine protection.Only in conjunction with the original header.

Does not interfere and offers maximum utility! The original luggage rack provides ample space to attach a robust, practical bag. It is perfectly suited to securely store a rain suit, spare gloves, tools, and small purchases, keeping them safe and protected.Of course, the passenger is not cramped in any way, and the rider's mounting is not unnecessarily complicated by the bag's seat being positioned far back on the vehicle.The rear bag is pushed onto the luggage rack from the back, secured at the front with two straps, and a safe, precise fit is ensured by the special base plate!Also a perfect addition as a travel-ready extension to the existing storage space-vehicle-specific, precisely fitting base plate for a play-free and stable hold on the vehicle-insert made of robust and waterproof tarpaulin-we use not simple nylon, but certified Cordura fabric as used in motorcycle protective clothing and expedition gear-sturdy base body and lid made of high-quality, water-repellent, and abrasion-resistant 1100 dtex Cordura -fluorocarbon impregnation and Teflon coating with nano-technology as protection against moisture, dirt, oil, and fading-washable and easy to clean-the fabric used has been successfully tested for harmful substances according to Oeko-Tex Standard 100-reflective inserts from 3M Scotchlite ensure optimal visibility-built for extreme loads and long durability -best fit-secure attachment yet easily removable from the vehicle-low weight with high payload and large usable volume-water-protected, high-quality zippers-elastic, reflective rubber cords with quick-release for fast attachment of gloves or rain jacket -large main compartment without annoying dividers for maximum space and individual loading-interesting, exclusive material mix with a refreshing design-all luggage systems are handcrafted with great care-no annoying improvisation with "universal mounting kits" and poor fit; the luggage systems are vehicle-specific developed, and the installation and durability have been tested by usAttention: Please use a paint protection film if necessary!Dimensions: (L x W x H) approx. 30 x 30 x 19 cm Volume: approx. 13 litersColor: black

The brake fluid reservoir is quite openly accessible on the Honda. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut stainless steel effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.

Every adventure can take its toll!Don't let your motorcycle pay the price. Effectively protect the three-cylinder of your Triumph with the Touratech crash bar.The additional reinforcement, which is easily attached with 3 clamps directly to the bar, ensures absolute stability and a great adventure look.The 2 mm thick stainless steel plate covers important parts of the engine that can be easily damaged by stone chips. The rust-free material is also very easy to maintain. Scratches can be polished out in no time.Only in conjunction with engine crash bar 01-421-5155-0.

The extremely robust protective strip on the body is bolted and can therefore be easily replaced after an accident, for example. The same applies to the sturdy protective corners on the luggage lid.

This progressive replacement spring is perfectly tuned to the shock absorber of the Yamaha Tenere 700. The shock absorber thus has a better setup for the demands of motorcycle travel. Additionally, you will experience a significantly improved response and higher reserves in the limit range. For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. When replacing only one component, optimal handling will not be achieved.Delivery includes: Installation instructions and setup data.Our recommendation: Have the conversion carried out by a professional workshop.Do you have further questions? We are happy to advise you personally, please contact us

Super lightweight chain guard with a sporty look made from laser-cut, black anodized aluminum.Thanks to the use of the original mounting points, installation with the included screw kit takes just a few minutes.

A well-known problem that has cost most motorcyclists their last nerve! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration thanks to this practical accessory.Also suitable for KTM Super Adventure S, R, T (from 2017)