O-Ring Oil Filter Cover 88X3MM              Technical Data:Range:   No Inner Diameter:   88 mmOuter Diameter:   94 mmHeight:   3 mmMaterial:   Rubber Design:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

O-Ring Set

For use of the Duonix Bikescan-100 with the OBD-II interface on BMW motorcycles.

Oberer SturzbügelDie oberen Sturzbügel werden aus schwarz pulverbeschichtetem Stahl konstruiert und werden als Ergänzung des Sturzbügels von SW-MOTECH montiert.Die exklusiv für dieses Motorrad entwickelten Elemente passen sich nahtlos in die Optik des Fahrzeuges ein und garantieren eine einfache Montage. Die oberen Sturzbügel schützen vornehmlich die Verkleidung des Motorrads und verleihen dem Motorrad einen individuellen Look.Konstruktion aus robustem Stahl mit 22 mm RohrdurchmesserWitterungs- und korrosionsbeständige Pulverbeschichtung in SchwarzSchützt die VerkleidungModellspezifische Entwicklung garantiert präzise PassgenauigkeitEinfache Montage durch Verschrauben an original AnbaupunktenLieferumfang2 x Oberer SturzbügelMontagematerialDetailsMaterial: StahlOberfläche: pulverbeschichtetFarbe: schwarzGesamtgewicht: ca. 4,4 kgHinweisDer untere Sturzbügel ist nicht im Lieferumfang enthalten.Für Montage erforderlichDie Montage ist nur mit dem SW-MOTECH Sturzbügel oder dem original BMW Sturzbügel möglichNicht kompatibel mitDie oberen Sturzbügel sind nicht mit den BMW LED-Zusatzscheinwerfern kompatibel, da Sturzbügel und Scheinwerfer an den gleichen Anbaupunkten montiert werdenGenehmigungshinweisDieses Produkt muss nicht zugelassen werden. Es benötigt daher auch keine Prüfzeichen, Gutachten oder Allgemeine Betriebserlaubnis. Die Informationen in der Anbauanleitung sind zu beachten.

Oberer SturzbügelDie oberen Sturzbügel werden aus schwarz pulverbeschichtetem Stahl konstruiert und werden als Ergänzung des Sturzbügels von SW-MOTECH montiert.Die exklusiv für dieses Motorrad entwickelten Elemente passen sich nahtlos in die Optik des Fahrzeuges ein und garantieren eine einfache Montage. Die oberen Sturzbügel schützen vornehmlich die Verkleidung des Motorrads und verleihen dem Motorrad einen individuellen Look.Konstruktion aus robustem Stahl mit 22 mm RohrdurchmesserWitterungs- und korrosionsbeständige Pulverbeschichtung in SilberSchützt die VerkleidungModellspezifische Entwicklung garantiert präzise PassgenauigkeitEinfache Montage durch Verschrauben an original AnbaupunktenLieferumfang2 x Oberer SturzbügelMontagematerialDetailsMaterial: StahlOberfläche: pulverbeschichtetFarbe: silbernGesamtgewicht: ca. 3,4 kgHinweisDer untere Sturzbügel ist nicht im Lieferumfang enthalten.Für Montage erforderlichDie Montage ist nur in Kombination mit dem SW-MOTECH Sturzbügel möglich.GenehmigungshinweisDieses Produkt muss nicht zugelassen werden. Es benötigt daher auch keine Prüfzeichen, Gutachten oder Allgemeine Betriebserlaubnis. Die Informationen in der Anbauanleitung sind zu beachten.

This is a new part offered Vehicle: S1000RR Manufacturer: BMW Condition: New with storage marks Description: sold as shown Part number: 11437715430 Fits according to part number for the following vehicles:

The Stahlbus® oil drain valve is simply replaced with the existing oil drain screw.When changing the oil, unscrew the protective cap and attach the hose connector using the quick-release mechanism.Only when it is locked in place does the valve open, allowing the oil to drain into the provided container.When disconnecting the hose connector, the valve automatically closes, and you only need to screw the protective cap back on. Advantages at a glance: • No contact with oil • Easy handling with quick-release mechanism • Drain screw cannot be lost • No risk of burns from hot oil • No need to change seals • Oil pan thread is preserved • Double leak protection (protective cap and valve) • Connection to suction device possible • Controlled draining for sample collection or in case of overfilling • Protective cap secured against loss with O-ring • Oil change without tools Changing oil has never been this fun! Scope of delivery: - Valve body, CNC precision turned part made of high-quality steel - Copper seal - Hose connector, CNC precision turned part made of high-quality steel - High-quality hose 40cm long - Protective cap made of anodized aluminum - Illustrated operating instructions Technical Data:Thread: M18 x 1.5 Length: 20.6 mmHead: Hexagon head Wrench size: 19 mm Material: Steel Color: silver For safety wire: No Seal/washer: Yes Magnetic: No

51.9X45.3X0.3MM     Oil Filter Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Oil Filter Gasket Athena Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Hiflo Premium Oil Filter   The Hiflo Premium Oil Filters provide optimal benefits for the customer and impress with the best quality. Only high-quality materials are used in the manufacturing of the filters.   As the only filter manufacturer, Hiflo has its filters tested and certified by TÜV Süddeutschland. The filters are compared with the original filter in all relevant criteria. The test can only be passed successfully if the Hiflo filter meets or exceeds the values of the original filter. This ensures that all filters meet the quality requirements of the original equipment.   Hiflo also offers the largest range of filters for motorcycles and ATVs.

Mahle Oil Filter - Two-part filter with seals- For models without oil cooler As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology. Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine. Advantages of Mahle oil filters:- Cold start resistance provided by a stable pleat geometry- Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts- Load peaks of up to 20 bar are compensated by the high pressure resistance of the housing- Oil supply is ensured at all times by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a heavily contaminated filter element due to exceeding the change interval)- The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply during engine start

Mahle Oil Filter   As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology.   Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine.   Advantages of Mahle oil filters:   - Cold start resistance ensured by a stable pleat geometry - Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts - Load peaks of up to 20 Bar are compensated by the high pressure resistance of the housing - Oil supply is always ensured by the pressure relief valve (in the case of viscous oil, as is present during cold start phases or at low outside temperatures, as well as with a filter element that is heavily contaminated due to exceeding the change interval) - The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply upon engine start Fits the following vehicles: i3 I01 LCI   (01/2017 — 12/2019) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 12/2019) K22 (R nineT Pure)   (12/2015 — 12/2019) K23 (R nineT Scrambler)   (09/2015 — 12/2019) K32 (R nineT Racer)   (12/2015 — 07/2019) K33 (R nineT Urban G/S)   (03/2016 — 12/2019) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 12/2019) K61 (K 1600 Bagger)   (01/2017 — 12/2019) K83 (F 900 R)   (11/2018 — 12/2019) K84 (F 900 XR)   (11/2018 — 12/2019) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 12/2019) K19 (C 650 GT)   (01/2011 — 12/2019) K08 (C 400 GT)   (04/2018 — 12/2019) K09 (C 400 X)   (03/2018 — 12/2019)

Mahle Oil Filter - Two-part filter- With seals- For models with oil cooler As one of the world's leading filter manufacturers and original equipment suppliers for BMW motorcycles, Mahle has always stood for quality and technology. Mahle oil filters reliably keep dirt particles out of the lubrication circuit, thereby maintaining both the oil quality and the performance and efficiency of the engine. Advantages of Mahle oil filters:- Cold start resistance ensured by a stable pleat geometry- Reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connection parts- Load peaks of up to 20 bar are compensated by the high pressure resistance of the housing- Oil supply is ensured at all times by the pressure relief valve (in the case of thick oil, as is present during cold start phases or at low outside temperatures, as well as with a heavily contaminated filter element due to exceeding the change interval)- The non-return valve prevents the filter from draining when the engine is off and ensures quick oil supply during engine start

Oil Level Check

Herth+Buss Oil Pressure SwitchWith flat connector (1 x 6.3 mm), thread: M 12 x 1.5Switching pressure: 0.2-0.5 bar

  VEMO Oil Pressure Switch   ·         With sealing ring   Technical Data: Thread size M12x1.5 Switch pressure: 0.2-0.5 bar

Original BMW Spare Part

JMP Oil Temperature Direct Meter / Analog Display   The original oil filler screw must be replaced with the direct meter. Please note that the measuring probe is often only wetted with splashed oil.A measurement at, for example, the oil drain screw will therefore yield a different value.  Technical Data:Thread:   27 x 2.0 Thread Length:   11 mmTotal Length:   68 mmNeedle Length (exposed):   48 mm

Mahle oil filter cartridge - For all R-models with 3 sealing rings As one of the world's leading filter manufacturers and OEMs for BMW motorcycles is Mahle has always stood for quality and technology. Oil filter Mahle keep dirt reliably from the lubrication circuit away to thereby obtain both the oil quality and the performance and efficiency of the engine. Mahle oil filter cartridges equipped made of sheet steel, deep-drawn and powder-coated housing for faster release of the filter with a polygon. Benefits of Mahle oil filters: - where cold start resistance by a stable pleat geometry - reliable separation of contaminated and filtered oil through high-quality sealing materials and precise connectors - peak loads up to 20 bar are compensated by the high compressive strength of the housing - oil supply ensured by pressure relief valve at any time (for viscous oil, as it is placed in cold start phases or at low outside temperatures, as well as in a heavily contaminated by exceeding the change interval filter element) - return valve the emptying of the filter prevented when the engine and ensures at engine start rapid supply of oil

JMP oil temperature gauge / analogue display The original oil filler plug must be replaced with direct knife. Please note that the probe often only with geschleudertem oil wetted on .A measurement example Therefore, the oil drain plug results in a different value. Danger Please carefully compare the thread diameter, pitch and length of the oil dipstick with the replacement part !!!!!!!! Dimensions: - thread x pitch: 26 x 1.5 mm - Thread length: 9 mm - Total needle length: 298 mm - Exposed needle length: 280 mm No reason for complaint The bubble in the sight glass assures the compensation of the damping oil when heated!

JMP Öltemperatur-Direktmesser / Analog-Anzeige   Die originale Öleinfüllschraube ist gegen den Direktmesser auszutauschen. Bitte beachten Sie, dass die Messsonde oftmals nur mit geschleudertem Öl benetzt wird. Eine Messung an z.B. der Ölablassschraube ergibt daher einen anderen Wert.  

Timing Chain Original equipment manufacturer in the automotive, motorcycle, and motorsport sectors meets all requirements of modern high-performance engines reliable and precise engine control

This is a used part being offered Vehicle: K100 / K75 Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, parts donor!!! Part number: 65752315540

Original Aluminium Koffer Silber links 37 l elektrifiziert für BMW R1300GS Adventure GSA Die robusten Koffer aus Aluminium bieten zusammen über 73 Liter Stauraum. Mit praktischen Details wie einem integrierten USB-C-Ladeanschluss, bis zu 10 kg Zuladung je Seite und genug Platz für einen Helm überzeugen sie vor allem auf langen Reisen. Hochwertiges und robustes Kofferset aus AluminiumStauvolumen: Koffer links: 37 LiterZuladung: 10 kg je KofferUSB-C-Ladeanschluss (5 V, 3 A) im linken KofferEinfache und schnelle MontageG-Haken auf den Kofferdeckeln zur einfachen HandhabungFarbe: silber mit BMW Motorrad Schriftzug