Navigation Holder for BMW F900XR for BMW Navigation Device Elegant solution at eye level. For mounting navigation devices on the BMW F900XR. Since the original BMW navigation device is mounted directly on the handlebar bridge, you have to look down far while riding. This is a safety concern and can be dangerous. Therefore, we offer this very elegant and sensible solution. Our holder is screwed onto existing screws of the fairing part. See photo. The instruments are not covered by this. We offer the holder in two versions: for navigation devices that are mounted with a 25 mm ball. If you want to mount your navigation device higher with the original BMW mounting, you will need our holding system for BMW navigation devices. Please select the appropriate item when placing your order.

Navigation Mount for BMW F900XR Navigator with 25mm Ball Elegant solution at eye level. For mounting navigation devices on the BMW F900XR with a 25mm ball. Since the original BMW navigation system is installed directly on the handlebar bridge, you have to look down far while riding. This is a safety concern and can be dangerous. Therefore, we offer this very elegant and sensible solution. Our mount is screwed onto existing screws of the fairing part. See photo. The instruments are not obscured by this. We offer the mount in two versions: for navigation devices that are mounted with a 25mm ball. If you want to position your navigation device higher using the original BMW mount, you will need our holding system for BMW navigation devices. (1008-10383) Please select the appropriate item when placing your order.

TomTom Mount for Your BMW R1200GS Adventure LC With this mount, you can easily and securely attach the original TomTom holder to the bracket above the speedometer. Our mount is suitable for bracket diameters of 12mm and 16mm. The integrated grooves ensure that the mount is securely fixed to the bracket (light mounting traces may occur). The mount is compatible with all TomTom Rider motorcycle navigation devices. made from high-strength aluminum CNC machined black anodized complete with all mounting materials easy installation Made in Germany Delivery includes: Mount upper and lower part 2 pcs. mounting screws for the mount 4 pcs. mounting screws for the TomTom holder Attention, only the mount with screws is delivered, not the navigation device and/or accessories! Usage list: R1200GS Adventure LC all models with a bracket above the speedometer (some special accessories, please check if available!)

TomTom Mount for Your BMW R1250GS and R1250GS Adventure With this mount, you can easily and securely attach the original TomTom holder to the bracket above the speedometer. Our mount is suitable for bracket diameters of 12mm and 16mm. The integrated grooves ensure that the mount sits securely and does not twist on the bracket (light mounting traces may occur). The mount is compatible with all TomTom Rider motorcycle navigation devices. made from high-strength aluminum CNC machined black anodized complete with all mounting materials easy installation Made in Germany Delivery includes: Mount upper and lower part 2 pcs. mounting screws for the mount 4 pcs. mounting screws for the TomTom holder Attention, only the mount with screws is delivered, not the navigation device and/or accessories! Usage list: R1250GS + R1250GS Adventure all models with a bracket above the speedometer (please check for special accessories if available!)

TomTom Mount for Your BMW S1000XR With this mount, you can easily and securely attach the original TomTom holder to the bracket above the speedometer. Our mount is suitable for bracket diameters of 12mm and 16mm. The integrated grooves ensure that the mount sits securely on the bracket (light mounting traces may occur). The mount is compatible with all TomTom Rider motorcycle navigation devices. made from high-strength aluminum CNC machined black anodized complete with all mounting materials easy installation Made in Germany Delivery includes: Mount upper and lower part 2 pcs. mounting screws for the mount 4 pcs. mounting screws for the TomTom holder Attention, only the mount with screws is delivered, not the navigation device and/or accessories! Usage list: S1000XR all models with a bracket above the speedometer (please check if special accessories are available!)

TomTom Navihalter für Ihre BMW R1200GS und R1200GS Adventure Mit diesem Halter können Sie die originale TomTom Halterung am Bügel oberhalb des Tachos leicht und sicher befestigen. Unsere Halterung ist sowohl für Bügeldurchmesser von 12mm als auch von16mm geeignet. Durch eingearbeitete Rillen sitzt die Halterung verdreh sicher auf dem Bügel (es können leichte Montagespuren entstehen). Der Halter passt für alle TomTom Rider Motorrad Navigationsgeräte. gefertigt aus hochfestem Aluminium CNC gefräst schwarz eloxiert komplett mit allem Befestigungsmaterial leichte Montage Made in Germany Lieferumfang: Halter Ober- und Unterteil 2 Stk. Befestigungsschrauben für den Halter 4 Stk. Befestigungsschrauben für den TomTom Halter Achtung, geliefert wird nur die Halterung mit Schrauben nicht das Navi und/oder Zubehör!  Verwendungsliste: R1200GS + R1200GS Adventure alle Modelle mit Bügel über dem Tacho (zum Teil Sonderzubehör bitte prüfen, ob vorhanden!)

TomTom Navihalter für Ihre BMW R1200GS LC Mit diesem Halter können Sie die originale TomTom Halterung am Bügel oberhalb des Tachos leicht und sicher befestigen. Unsere Halterung ist sowohl für Bügeldurchmesser von 12mm als auch von16mm geeignet. Durch eingearbeitete Rillen sitzt die Halterung verdreh sicher auf dem Bügel (es können leichte Montagespuren entstehen). Der Halter passt für alle TomTom Rider Motorrad Navigationsgeräte. gefertigt aus hochfestem Aluminium CNC gefräst schwarz eloxiert komplett mit allem Befestigungsmaterial leichte Montage Made in Germany Lieferumfang: Halter Ober- und Unterteil 2 Stk. Befestigungsschrauben für den Halter 4 Stk. Befestigungsschrauben für den TomTom Halter Achtung, geliefert wird nur die Halterung mit Schrauben nicht das Navi und/oder Zubehör!  Verwendungsliste: R1200GS LC alle Modelle mit Bügel über dem Tacho (zum Teil Sonderzubehör bitte prüfen, ob vorhanden!)

Needle Bearing   - Drive Shaft - Drive Housing - Original Spare Part

Needle jet for Bing constant vacuum carburetor type 64-3. Total length 16.5 mm; largest diameter 7.5 mm; for atomizer air system - Replacement part for Bing carburetors: 64/26/301 - 304 64/28/301 - 304 64/32/301 - 304 64/32/313 - 314 64/32/321 - 324 64/32/351 - 352 64/32/357 - 362 64/32/3030 64/32/3040 64/32/377

Needle Sleeve

With the net for the inside of the lid, we create additional space and organization. For example, the rain jacket or the toiletry bag can be easily attached to the lid of the case. Or you can use the net to secure one of our small bags or cubes in the lid. This way, you always have important items readily available as soon as you open the case.TIP: Can be universally mounted on aluminum cases! For example, the original aluminum cases of the BMW R1250GS-ADV or BMW F850GS.

NGK Spark Plug   NGK is the world's leading manufacturer of spark plugs.   State-of-the-art production facilities, significant investments in research and development, as well as strong commitment to motorsport, from Formula 1 to motorcycle racing, make the NGK spark plug so successful.

NGK Spark Plug   Package = Contents 2 pieces   NGK is the world's leading manufacturer of spark plugs.   State-of-the-art production facilities, significant investments in research and development, as well as strong commitment to motorsport, from Formula 1 to motorcycle racing, make the NGK spark plug so successful.

NGK Spark Plug   The secret of the new Iridium IX spark plug lies in the laser-welded electrode made of iridium. With its "minimal" diameter of just 0.6 mm, it concentrates the ignition voltage.     Advantages:   The optimal ignition properties of the Iridium IX spark plugs prevent fouling during stop-and-go traffic.   Misfires or ignition dropouts are prevented. This reduces emissions and protects (if present) the catalytic converter and the environment.   The Iridium IX spark plugs ensure a "smooth" engine operation, enhance the riding experience through better acceleration, and thus provide more driving pleasure.   The Iridium IX spark plug lasts at least twice as long as any standard spark plug. Frequent spark plug changes are therefore "out." This, in turn, reduces costs.   Highest ignition reliability, even combustion, optimal engine performance, and spontaneous throttle response are the result of state-of-the-art technology and reduce fuel consumption.   The optimized electrode shape reduces the ignition voltage requirement, protects the engine, and ensures a "smooth" operation.

NGK Spark Plug Connector   The use of NGK spark plug connectors with suppression resistors provides optimal suppression of interference frequencies across all frequency ranges when used in conjunction with NGK spark plugs, without negatively affecting the engine's performance.   NGK spark plug connectors are equipped with a resistance element made of high-quality ceramic material. This ensures a constant resistance value with only slight deviation under overload conditions.          Technical Data:Type:   Connector Spark Thread Diameter:   14 mmConnection Type:   M4 connection thread Angle:   90° Resistance:   5 kiloohmsSuppressed:   Yes Material:   Phenolic resin Color:   black Cable Length:   without cable Integrated Ignition Coil:   No

  Nocke Gasgriff

  Nocke Gasgriff

The carbon number plate holder for the BMW S 1000 XR from MY 2015 till 2019 replaces the original part using the original mounting points. The original splash guard can be used also with the number plate holder. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

The short sport carbon number plate holder for the BMW S 1000 XR replaces the original part using the original mounting points. It is slightly shorter than the original part. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

The number plat holder in carbonfiber for BMW R NineT is a direct replacement for the original component.No ABE and TÜVThis front fender contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

The carbon number plate holder for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) replaces the original part using the original mounting points. It is slightly shorter than the original part. This makes the motorcycle&rsquos tail seem a bit taller. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Numberplate-holder (2 pieces) BMW R 1250 R and BMW R 1250 RS starting from MY 2019This numberplateholder fits also with the original BMW case system.  This part is a direct replacement for the original component and uses only original mounting points on the bike for the assembly. The part contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Our part is slightly shorter than the original part but does not influence the bikes sporty silhouette. A mounting of the originally supplied luggage system is also possible with our numberplate-holder Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Numberplateholder carbon for the BMW R 1200 R (LC) from MY 2015 and BMW R 1200 RS (LC) from 2015. Usable together with the original cases! The carbon number plate holder for the BMW R 1200 R (LC) from MY 2015 / BMW R 1200 RS (LC) from MY 2015 replaces the original part using the original mounting points. It is slightly shorter than the original part. This makes the motorcycle&rsquos tail seem a bit taller.The two-piece carbon number plate holder is mounted on the rear undertray.  You can find a 360° video of our part in the category product Videos! This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Nut