Rubber mount set for diode plate  

The installation kits for the quantum fuel pump are designed to meet or exceed OEM specifications, and feature upgrades that enhance the OEM design. The vibration damper replaces the BMW part number: 16121464628. It is designed for a pump diameter of 52 mm. (The part number of the BMW fuel pump is 16121461576 - not included in the offer) The fuel filter / pre-filter replaces the BMW part number: 16121455126

Mounting Plate Crash Bar

Timing Chain

This disc shape was developed for racing and is used by many racing teams. The racing disc corresponds to the original disc in the lower part but has a dome-like elevation in the middle. This relieves the helmet from wind pressure and improves aerodynamics. Cost-effective alternative to the original windscreen. Years of experience and high quality standards guarantee an optimal fit in the vehicle. The windscreens have an ABE and do not need to be registered in Germany! The windscreen is offered in the colors smoke gray, black, and colorless/clear. Length in mm: 440 Width in mm: 440

The 34cm long sports screen (SPM) from MRA makes a strong impression! In elegant black, discreet clear, or lightly tinted smoke gray, it gives the R1300GS a sportier appearance. The cut and shape of the screen take inspiration from the X in the BMW headlight and reflect its modern character. Easily replaceable with just a few hand movements, it clears the view for rocky terrain. The screen is compatible with models with and without radar systems. It fits models with and without electric screen adjustment. The screen is compatible with the Enduro package.

The touring screen is generally longer, and sometimes wider than the original screen, to better protect the rider from wind and weather. Depending on the angle of the screen, the rear edge of the screen is also tilted upwards as a wind deflector across its entire width on some models. This makes riding more comfortable even on longer trips.

The 40cm high and 35.5cm wide Touring Screen (TM) from MRA offers better wind protection with its greater width and height compared to the original screen. The touring screen incorporates the X design from the headlight, thus complementing the modern look of the R1300GS. Lightweight and easy to replace, it shines in a short installation time in clear, smoke gray, or elegant black as desired. The screen is compatible with models with and without radar systems. The screen fits models with and without electric screen adjustment. The screen is compatible with the Enduro package.

The well-known and popular MRA Variotouring Screen (VTM) is a must-have for the R1300GS! Thanks to thoughtful engineering, the airflow is expertly and almost turbulence-free directed behind the adjustable spoiler. The 40cm long base screen provides good wind protection, while the mounted spoiler at the top of the screen completes the "work" almost silently. Here, it's not about the length but the sophisticated technology of the attachment spoiler. We have also improved the width here. The MRA Variotouring Screen, with its seven-position adjustable spoiler at the top of the screen, directs the airflow and disperses it smoothly. This ensures turbulence-free airflow and a calm riding experience. The attachment is easily adjustable without tools. The Variotouring Screen is available in clear and smoke gray. The screen is compatible with models with and without radar systems. The screen fits models with and without electric screen adjustment. The screen is compatible with the Enduro package.

Muffler / Silencer Protector - BMW S 1000 XR MY 2015-2019 For this. thermic stressed. carbonpart. we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

Thanks to the combination of elegant rounding and hard edges. the carbon exhaust heat protection fits like no other in the modern lines of the BMW S 1000 XR 2020. Not only visually. but also technically. it offers many benefits. High-quality carbon conducts heat much slower than the materials of the original part would. In comparison. the outside remains noticeably cooler and the foot is better protected from burns. In order to obtain a particularly harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. The facts: - With general operating permit (ABE) - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Multi-X-Creen (MXC) complete screen with integrated adjustable spoiler. The Multi-X-Creen is a two-part screen, the end of which (spoiler) can be individually adjusted. This is outstanding both visually and functionally. After extensive test rides under various conditions, all our test riders - whose heights range from 1.70m to 1.98m - were able to find the perfect adjustment of the screen for their needs. Despite its understated appearance, the Multi-X-Creen screen offers excellent riding comfort.

Stubby Handlebar Kit multiClip Sport Ready-to-install kit with all necessary parts, always tailored to the selected vehicle model. Choose the color combination of the steel braided lines: Sheathing/Fitting. The illustration shows the exemplary scope of delivery of a multiClip Kit. This varies depending on the motorcycle model. With the stubby: significantly higher seating comfort without having to install a superbike kit with a pipe handlebar directly. The stubby can also be adjusted lower again if needed. With parts certificate. KIT consists of: multiClip Sport Ø55 mm BM1S Extended clutch cable Upper brake line Spacer for fairing Hose piece for reservoir Clamp for the original fork bridge [2x] Spacer ring under the fork bridge [2x]Stubby approximately 3 cm higher / approximately 7 cm wider compared to the original.

Stubby Handlebar Kit multiClip TOUR Ready-to-install kit suitable for the selected vehicle model. The illustration shows the exemplary scope of delivery of a multiClip kit. This varies depending on the motorcycle model. With the stubby: significantly higher seating comfort without having to install a superbike kit with tubular handlebars directly. The stubby can also be adjusted lower again if needed. Please order separately: Handlebar ends With parts certificate. In Germany, the kit must be approved and registered at a testing facility after installation. The KIT consists of: multiClip Tour Ø43 mm Upper fork bridge gpRacing black Small parts- up to approx. 5.5 cm higher / up to approx. 8 cm wider

Mother - cardan M24X1,5- OE Replacement

Adjustable Shift Lever BMW R1200GS from 2010-2018 The shift lever is mounted on the original gear lever. The installation time is half an hour. The joint pin of the gear lever and the ball head are replaced with a longer one. Shifting with the shift lever leads to a more relaxed shifting process. Due to a model change from BMW, it is necessary for you to send us a photo of your gear lever. World travelers have been waiting a long time for this option, as shifting while standing is almost impossible. Of course, the original shifting process remains intact. If the handlebars are too low for you, we have something for that as well. Our Handlebar Adapter 1008-901449 is ideal for you. For those with a tight knee angle, we recommend our stable, lowered footpeg 1008-907938b . This way, world travelers are well equipped.

MV Shift Lever R1200RT LC and R1250RT LC The icing on the cake for the best-selling tourer in the world, the BMW R1200RT LC R1250RT MV shift lever for the best-selling tourer. For even more relaxed touring, we have now developed a shift lever for the BMW R1200RT LC and R1250RT LC that is mounted on the original gear lever. The shift lever is adjustable in all directions. With the second lever, you have the option to shift all gears from above, but you can also shift as usual. The shift lever is attached to the original gear lever. The interesting part is the selectable shifting. The original gear lever remains intact. With our additional lever, you can elegantly shift all gears from above. This also gives your foot a break. The lever is adjustable axially and in height. The RT also loves to lean, and even in this position, you can still shift up.

The BMW R nineT Crown for R nineT, Scrambler, Urban, Pure, and Racer - Ø 46 mmCrown your R nineT!In just 3 minutes of installation time with a clamp, you can complete your retro.This not only improves the appearance, but the engine also receives better cooling.The exhaust crown in cylindrical shape was not cast, but meticulously turned and milled from solid aluminum.The price is for a pair.Design patent 40 2019 000 798.5 protected.All items were mounted and tested on original motorcycles - without any modifications.

Extended Reverse Lever BMW R18 An elegant and interesting looking solution for the reverse lever on the BMW R18, which is mounted quite low and hidden. We have solved this problem and created a sensible and visually reminiscent solution to the 1940s. Many motorcycles in the 40s came with a reverse gear as standard. The adapter is slipped over the original lever and secured with 2 M6 threaded pins underneath. We offer the lever in polished and black anodized finishes and for two models. Once for models with 60mm and 100mm. Please measure the length of your original reverse lever and then select the corresponding length. You can also choose the composition of the lever, ball holder, and ball individually. Please write to us about this as a note with your order.

This is a used part being offered Vehicle: BMW R18 Manufacturer: MV Verholen Condition: normal signs of use Description: sold as shown, scratchesPart number: 10392 An elegant and interesting looking solution for the reverse lever on the BMW R18, which is mounted quite low and hidden. We have solved this problem and created a sensible solution that visually recalls the 1940s. Many motorcycles in the 40s came with a reverse gear as standard. The adapter is slipped over the original lever and secured with 2 M6 threaded pins underneath.

MV Seat Lowering for BMW R1250GS from 2021 onwards With our lowering kit, the front seat is lowered by 10mm. 10mm may seem like a small amount, but it can make a big difference when your boot heel is firmly on the ground, providing a sense of security while maneuvering. Installation time is only 1 minute.

Puig Windscreen NAKED A windscreen in the naked bike look. Made from durable polycarbonate. It offers good protection against wind and weather and improves aerodynamics. Installation instructions and required mounts are included.Technical Data:Height:   345 mmWidth:   320 mmColor:   light smoke gray Manufacturer:   Puig

Navigation Mount for BMW 750GSWith this elegant solution, you can attach your TomTom, Garmin, or other navigation devices.The mount is designed to fit only the small BMW windscreen No. 1 = height 216 mm.The mount is secured to the upper screws that hold the windscreen in place.All items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Navigation Mount for BMW Navigation Devices with 25mm Ball With our mount, you have the option to attach a ball to your navigation device and position it on the handlebar. The power supply is achieved through a Y-connector at the input of the onboard socket. The onboard socket is not used from the outside. After switching off, the navigation device remains on for about 4 minutes. Our system prevents the battery from being deeply discharged. The cable is included in the price and is connected to the onboard socket. However, it is only suitable for the use of navigation devices or mobile phones, not for additional lights. The latest MV device holder for your BMW navigation device The mount replaces an M8 handlebar mounting screw. The ball is made of polished aluminum and has a diameter of 25.4 mm. All balls are equipped with a rubber ring, making them non-slip and vibration-dampened.   The RamMount holder (Item No. 1008-109011) must be ordered separately.