O-Ring Oil Filler Cap 25X2.7MMTechnical Data:Inner Diameter:   25.00 mmOuter Diameter:   30.00 mmThickness:   2.50 mmScrew Fastening:   none

O-ring for fuel tap Original spare part

O-Ring YSS

  Water Pump Cover Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

O-Ring Venturi Mixing Tube 8X2MM Technical Data:Range: No Inner Diameter: 8 mmOuter Diameter: 12 mmHeight: 2 mmMaterial: Rubber Design: Round Fuel Resistant: Yes Oil Resistant: Yes

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

O-Ring Athena   Athena, an international company founded in 1973, develops and manufactures seals, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement seals available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of seals with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.Technical Data:Range:   No Inner Diameter:   29.75 mmOuter Diameter:   36.75 mmHeight:   3.5 mmMaterial:   Rubber Shape:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

O-Ring Athena   Athena, an international company founded in 1973, develops and manufactures seals, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of seal kits with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement seals available on the market and has over 40 years of experience in the industry. The Athena seal kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of seals with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.Technical Data:Range:   No Inner Diameter:   7.52 mmOuter Diameter:   14.58 mmHeight:   3.53 mmMaterial:   Rubber Shape:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

O-ring for fuel tap Original spare part

Starter Cover Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena provides a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.              

O-Ring Ignition Unit 37X3MM Technical Data:Range: No Inner Diameter: 37 mmOuter Diameter: 43 mmHeight: 3 mmMaterial: Rubber Design: round Gasoline Resistant: Yes Oil Resistant: Yes

O-Ring FlywheelTechnical Data:Range: No Inner Diameter: 53 mmOuter Diameter: 59 mmHeight: 3 mmMaterial: Rubber Design: round

O-Ring Oil Filter 44X4MM   Attention: Only for conical oil filter covers from 09/1976.        Technical Data:Range:   No Inner Diameter:   36 mmOuter Diameter:   44 mmHeight:   4 mmMaterial:   Rubber Design:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

Seal for mixture adjustment screw Bing constant pressure carburetor type 64-3. Inner diameter 3 mm; ring thickness 1.5 mm

Seal ring for starter carburetor housing for Bing constant pressure carburetor type 64-3. Inner diameter 5 mm; ring thickness 1.5 mm

O-Ring Inner Cover of the Drive Shaft 171.1X2.62MMTechnical Data:Outer Diameter:   171.1 mmHeight:   2.62 mmMaterial:   Rubber Design:   Round

O-Ring Oil Filter Cover 88X3MM              Technical Data:Range:   No Inner Diameter:   88 mmOuter Diameter:   94 mmHeight:   3 mmMaterial:   Rubber Design:   Round Gasoline Resistant:   Yes Oil Resistant:   Yes

O-Ring Set

For use of the Duonix Bikescan-100 with the OBD-II interface on BMW motorcycles.

Oberer SturzbügelDie oberen Sturzbügel werden aus schwarz pulverbeschichtetem Stahl konstruiert und werden als Ergänzung des Sturzbügels von SW-MOTECH montiert.Die exklusiv für dieses Motorrad entwickelten Elemente passen sich nahtlos in die Optik des Fahrzeuges ein und garantieren eine einfache Montage. Die oberen Sturzbügel schützen vornehmlich die Verkleidung des Motorrads und verleihen dem Motorrad einen individuellen Look.Konstruktion aus robustem Stahl mit 22 mm RohrdurchmesserWitterungs- und korrosionsbeständige Pulverbeschichtung in SchwarzSchützt die VerkleidungModellspezifische Entwicklung garantiert präzise PassgenauigkeitEinfache Montage durch Verschrauben an original AnbaupunktenLieferumfang2 x Oberer SturzbügelMontagematerialDetailsMaterial: StahlOberfläche: pulverbeschichtetFarbe: schwarzGesamtgewicht: ca. 4,4 kgHinweisDer untere Sturzbügel ist nicht im Lieferumfang enthalten.Für Montage erforderlichDie Montage ist nur mit dem SW-MOTECH Sturzbügel oder dem original BMW Sturzbügel möglichNicht kompatibel mitDie oberen Sturzbügel sind nicht mit den BMW LED-Zusatzscheinwerfern kompatibel, da Sturzbügel und Scheinwerfer an den gleichen Anbaupunkten montiert werdenGenehmigungshinweisDieses Produkt muss nicht zugelassen werden. Es benötigt daher auch keine Prüfzeichen, Gutachten oder Allgemeine Betriebserlaubnis. Die Informationen in der Anbauanleitung sind zu beachten.

Oberer SturzbügelDie oberen Sturzbügel werden aus schwarz pulverbeschichtetem Stahl konstruiert und werden als Ergänzung des Sturzbügels von SW-MOTECH montiert.Die exklusiv für dieses Motorrad entwickelten Elemente passen sich nahtlos in die Optik des Fahrzeuges ein und garantieren eine einfache Montage. Die oberen Sturzbügel schützen vornehmlich die Verkleidung des Motorrads und verleihen dem Motorrad einen individuellen Look.Konstruktion aus robustem Stahl mit 22 mm RohrdurchmesserWitterungs- und korrosionsbeständige Pulverbeschichtung in SilberSchützt die VerkleidungModellspezifische Entwicklung garantiert präzise PassgenauigkeitEinfache Montage durch Verschrauben an original AnbaupunktenLieferumfang2 x Oberer SturzbügelMontagematerialDetailsMaterial: StahlOberfläche: pulverbeschichtetFarbe: silbernGesamtgewicht: ca. 3,4 kgHinweisDer untere Sturzbügel ist nicht im Lieferumfang enthalten.Für Montage erforderlichDie Montage ist nur in Kombination mit dem SW-MOTECH Sturzbügel möglich.GenehmigungshinweisDieses Produkt muss nicht zugelassen werden. Es benötigt daher auch keine Prüfzeichen, Gutachten oder Allgemeine Betriebserlaubnis. Die Informationen in der Anbauanleitung sind zu beachten.

This is a new part offered Vehicle: S1000RR Manufacturer: BMW Condition: New with storage marks Description: sold as shown Part number: 11437715430 Fits according to part number for the following vehicles:

The Stahlbus® oil drain valve is simply replaced with the existing oil drain plug. During an oil change, you unscrew the protective cap and attach the hose connector via a quick-release mechanism. Only when it is locked in place does the valve open, allowing the oil to drain into the provided container. When you disconnect the hose, the valve automatically closes, and you only need to screw the protective cap back on.   Advantages at a glance: • No contact with oil • Easy handling with quick-release • Drain plug cannot be lost • No risk of burns from hot oil • No need to change seals • Oil pan thread is preserved • Double leak protection (protective cap and valve) • Connection to suction device possible • Controlled draining for sample collection or in case of overfilling • Protective cap is secure with O-ring • Oil change without tools   This is how oil changes can be fun!   Scope of delivery: - Valve body, CNC precision turned part made of high-quality steel - Copper seal - Hose connector, CNC precision turned part made of high-quality steel - High-quality hose 40cm long - Protective cap made of anodized aluminum - Illustrated operating instructions   Not suitable for Triumph Tiger 800 (internal hexagon)   Technical Data:Thread:   M14 x 1.5 Length:   19 mmHead:   Hexagon head Wrench size:   19 mm Material:   Steel Color:   silver For safety wire:   No Seal/Washer:   Yes Magnetic:   No

The Stahlbus® oil drain valve is simply replaced with the existing oil drain screw.When changing the oil, unscrew the protective cap and attach the hose connector using the quick-release mechanism.Only when it is locked in place does the valve open, allowing the oil to drain into the provided container.When disconnecting the hose connector, the valve automatically closes, and you only need to screw the protective cap back on. Advantages at a glance: • No contact with oil • Easy handling with quick-release mechanism • Drain screw cannot be lost • No risk of burns from hot oil • No need to change seals • Oil pan thread is preserved • Double leak protection (protective cap and valve) • Connection to suction device possible • Controlled draining for sample collection or in case of overfilling • Protective cap secured against loss with O-ring • Oil change without tools Changing oil has never been this fun! Scope of delivery: - Valve body, CNC precision turned part made of high-quality steel - Copper seal - Hose connector, CNC precision turned part made of high-quality steel - High-quality hose 40cm long - Protective cap made of anodized aluminum - Illustrated operating instructions Technical Data:Thread: M18 x 1.5 Length: 20.6 mmHead: Hexagon head Wrench size: 19 mm Material: Steel Color: silver For safety wire: No Seal/washer: Yes Magnetic: No