Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   2.55 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   2.60 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   2.65 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   2.70 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   2.75 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   2.80 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   2.85 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   2.90 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   2.95 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   3.00 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   3.05 mm

Valve Adjustment Shims JMPTechnical Data:Diameter:   29 mmThickness:   3.10 mm

Shock Absorber Alternator   Attention: 3 pieces are required!  

Drive Shaft Damper Original Spare Part Damper shafts are used to absorb load changes in the drivetrain. This reduces load spikes at high speeds and during sudden braking.   Worn dampers are noticeable through increased play in the drivetrain and automatically lead to wear of the chain set.  

Adjustable side motorcycle license plate holder with LED license plate lighting Complete CNC machined license plate holder for side mounting on the motorcycle. Very delicate license plate frame made of aluminum to accommodate license plates from various countries. The frame is closed on all sides, so no fixation of the license plate with screws is necessary. It features an E-approved LED license plate light. Scope of delivery: License plate frame in the corresponding country size and matching closure. Integrated LED license plate lighting E-approved. Model-specific holder and accessories for mounting on the swingarm of the motorcycle. Solder connector for quick electrical connection. Details: CNC machined from high-quality aluminum, finest surface finishing with BLACKPearl anodizing, previously sandblasted. Integrated LED license plate lighting, E-approved. Completely concealed routing of the cables. Screwless mounting of the license plate by simply sliding it into the frame. No fixation of the license plate with screws necessary. Vibration-damping rubber strips prevent rattling of the license plate. For different tire widths - 3-stage mounting of the license plate frame in the axial direction possible, closer to the wheel or further away. Inclination of the license plate frame infinitely adjustable. Anti-twist protection of the holding arm on the swingarm. With a small aluminum pin in the center of the closure. Available for license plates from various countries. Matching self-adhesive reflector optionally available. Note: The license plate frames have numerous predefined screw points that must be drilled accordingly before installation. With parts certificate.

BMW R1200RS LC Carbon tank cover bottom right Side cover R 1200 RS LC item Description Side cover under the tank right - BMW R 1200 RS (LC) from 2015 onwards. The tank cover right Carbon replaces the original part using the original mounting points.  In the foreground weight savings are (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

Carbonfiber Side panel under the tank left side for BMW R 1250 RS starting from MY19 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

BMW R1200RS LC Carbon tank cover bottom right Side cover R 1200 RS LC item Description Side cover under the tank right - BMW R 1200 RS (LC) from 2015 onwards. The tank cover right Carbon replaces the original part using the original mounting points.  In the foreground weight savings are (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

Carbonfiber Side panel under the tank right side for BMW R 1250 RS starting MY19 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Side Stand

Side Stand

Side Stand

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration thanks to this practical accessory.Fits only with original BMW side stands for lowered chassis.

Is your bike leaning too much? Then our side stand extension for upright parking of the bike is just what you need.Especially with a "loaded" bike, it can happen that your motorcycle tips over in the original angle under unfavorable ground conditions. The adapter shoe provides the side stand with a corresponding extension, widening, and height increase, making it easier to stand the bike upright.Simply slide it on and tighten the internal hex screw.The adapter does not fit the Adventure model.Height increase: 17mmAll items have been mounted and tested on original motorcycles - without any modifications.