The Scottoiler vSystem is a vacuum-controlled chain oiler that automatically lubricates the chain while riding. The system operates only when the engine is running and dispenses 1-2 drops of oil per minute, depending on the set drip rate. This enhances the performance of the chain, keeping it clean and smooth for up to 12,500 km. Chain wear is significantly reduced, eliminating the need for cleaning and lubrication. The Scottoiler marks the end of neglected chains on motorcycles and hands sticky from chain spray.The BMW F800GS Edition includes special parts for installation, and its color allows you to customize your motorcycle and install the kit discreetly.Features- Extends the lifespan of the chain and sprocket by up to 7 times- Increases chain efficiency and reduces consumption- Chain maintenance is fully taken over- Tensioning intervals are extendedHow it works:The system is connected to the machine's vacuum. It operates only when the engine is running. Depending on the preset drip rate, 1-2 drops of oil per minute are dispensed from the reservoir. These flow through the delivery hose to the injector, which releases the oil onto the sprocket. Centrifugal force drives the oil into the chain. Capillary action supplies both sides of the chain with oil. The lubrication with oil prevents dirt particles from sticking.Installation is very simple; all mounting parts are included in the kit. The system can be fitted to almost any motorcycle, including fuel-injected, 2-stroke, ATV, and quad. There are specific installation instructions for almost all models.Scope of delivery:The kit includes a 250ml bottle of standard Scottoil, which is suitable for medium ambient temperatures between 0-30°C, sufficient for a riding distance of approximately 12,500 km.

  Drive Shaft Bolt Total Length: 20mm Thread Length: 12.5mmTechnical Data:Type:   Threaded Bolts Thread:   M8 x 1.0 Diameter:   8 mmLength:   12.5 mmHead:   External Torx Drive:   External Torx Surface:   Blackened Color:   Black Manufacturer:   Other Special Feature:   With Washer For Safety Wire:   No

Bolt

  Bolt   Original spare partTechnical Data:Type:   Threaded bolts Thread:   M10 x 1.5 Length:   20 mmHead:   Hexagon head Drive:   Hexagon Surface:   No finishing Material:   Stainless steel Color:   silver Quality:   No quality class O-ring/Washers:   None Manufacturer:   Other

With these special screws, you can use the original BMW navigation device holder and the original BMW smartphone cradle in combination with our 35 mm handlebar riser (01-082-5256-0).Not suitable for the 20 mm handlebar riser!

Felt Seal Brake Shoe

Seal for ATE brake caliper for 40mm piston

Athena Dust Cap Gasket   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Athena Dust Cap Gasket   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Piston rod seal

Piston rod seal

ARI Fork Seal Set   The quality of their execution is matched by the unique nature of the material used (XNBR).   The fork seals offer unique properties and are used in modern forks of motorcycles and scooters:   - Resistance to abrasion and high temperatures     ARI fork seals meet OE quality in both quality and dimensions. This results in the best possible sealing under all road and climate conditions. The fork seals are suitable for daily use, motorsport, or even classic vehicles.Technical Data:Inner Diameter:   36 mmOuter Diameter:   46 mmInstallation Height:   7 mmTotal Height:   9 mmManufacturer:   ARI

JMP Fork Seal Set   The fork seals offer unique properties and are used in modern forks of motorcycles and scooters:   - Resistance to abrasion and high temperatures

JMP Fork Seal Set   The fork seals offer unique properties and are used in modern forks of motorcycles and scooters:   - Resistance to abrasion and high temperatures

JMP Fork Seal Set   The fork seals offer unique properties and are used in modern forks of motorcycles and scooters:   - Resistance to abrasion and high temperaturesTechnical Data:Inner Diameter:   40 mmOuter Diameter:   52 mmInstallation Height:   10 mmTotal Height:   10.5 mmManufacturer:   JMP

Fuel Cap Seal

JMP Fork Seal Set   The fork seals offer unique properties and are used in modern forks of motorcycles and scooters:   - Resistance to abrasion and high temperaturesTechnical Data:Inner Diameter:   41 mmOuter Diameter:   54 mmInstallation Height:   11 mmTotal Height:   11 mmManufacturer:   JMP

Seal Kit JMP   - Manufactured by NOKTechnical Data:Seal: Inner Diameter:   41 mmSeal: Outer Diameter:   54 mmSeal: Installation Height:   11 mmSeal: Total Height:   11 mm

This is a used part being offered Vehicle: K29 R1200S Manufacturer: BMW Condition: normal signs of use Description: sold as shown, without key BMW part number: 52537683736 / 52537686680

Used part, normal signs of use, see additional pictures BMW part number: 51257659164 Fits the following vehicles according to part number:

The seat side panel is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The seat side panel is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

Seat Unit Racing fits to BMW S 1000 RR MY from 2019 and M 1000 RRThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.