Carbonfiber Cover near the Instrument right side BMW R 1250 RS (LC) starting from MY19 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Left Cover Next to the Cockpit - BMW R 1200 RS (LC) from 2015. The inner cover on the left in carbon replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original component) and increased stiffness. The carbon part has been completely manufactured in the autoclave according to the latest guidelines from prepreg material (see FAQ) and, as is customary with us, coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Right Cover Next to the Cockpit - BMW R 1200 RS (LC) from 2015. The inner cover on the right in carbon replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original component) and increased stiffness. The carbon part has been completely manufactured according to the latest guidelines in an autoclave from prepreg (see FAQ) material and, as is customary for us, coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

Carbonfiber Cover under the Front Fairing left side for BMW R 1250 RS starting from MY19 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Carbonfiber Cover under the Front Fairing right side for the BMW R 1250 RS starting from MY19 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look at the 360 ° Video with the crashpads on the Frame for BMW S 1000 RR / HP 4. - The crashpad on the frame is covering the important area around the upper engine holder. The crashpad on the frame is an addition to the original components on the motorcycle and helps to protect the motorcycle. This crashpad protects the upper engineholder. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look on the 360 ° Video with the crahpads in carbon for the BMW S 1000 RR (all MY) and HP 4. You will find the Video at the button Product Videos above this description. - The crashpad on the frame is covering the important area around the upper engine holder.  The crashpad on the frame is an addition to the original components on the motorcycle and helps to protect the motorcycle. This crashpad protects the upper engineholder. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Cruise Control Screw

Vehicle-Specific Information: Until 31.08.1980 Cruise Control Screw

Front Cylinder Base Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Athena Cylinder Head Gasket   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Vehicle-Specific Information:  2 pcs.  Cylinder Head Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.    

Easy to install + lightweight + high protectionWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts".Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with the Touratech crash bars stainless steel 038-5160- made of 3mm thick silver anodized aluminum- easy and quick to installScope of delivery:Cylinder protection right + left, mounting materials, installation instructionsTo combine with original BMW crash bars, please order 045-5132!

Offered here is a used part Vehicle: R1100RS Manufacturer: BMW Condition: noticeable signs of use Description: sold as shown, heavy scratches and abrasions, the right side has a crack inside, holder/buffer are dented and cracked on the right side Part number: 46712316487

Cylinder Screw Clutch Pressure Plate   Attention: 6 pieces are required!  

Angeboten wird hier ein Neuteil Fahrzeug: R1200C + Montauk +  Independent R1200CL K1200GT K1200RS Hersteller: BMW Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 32722351517

Angeboten wird hier ein Neuteil Fahrzeug: K21 R nineT / K42 HP4 / K46 S1000RR / K47 S1000R / K49 S1000XR Hersteller: BMW Zustand: Neu Beschreibung: wird verkauft wie abgebildet Teilenummer:31427718399

Distance sleeve for oil/water pump

Drive Shaft ScrewTechnical Data:Type: Threaded Screws Thread: M8 x 1.0 Diameter: 8 mmLength: 21 mmHead: External Torx Drive: External Torx Surface: Blackened Color: Black Manufacturer: Other Special Feature: With Washer For Safety Wire: No

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1100RS Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, BING 75/45/101 Teilenummer: 13541340613

Angeboten wird hier ein Neuteil Fahrzeug: K25 R1200GS, R1200GS Adv., HP2 Enduro, HP2 Megamoto, HP2 Sport, RnineT, R900RT, R1200RT, R1200R, R1200ST, R1200S, F650GS Twin, F800GS, ..... Hersteller: BMW Neupreis: 172,54 € Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 13548406249 

The Dual Injector offers several advantages, as the Scorpion Dual Injector is mounted using a flexible multi-dispenser plate and can thus be individually adhered to all swingarm shapes. Optionally, the injector can also be directly screwed onto chain guides, swingarms, and much more. The robust and shock-absorbing plastic reinforcement around both nozzles inevitably directs every drop of oil to the chain / sprocket. Additionally, the precise dosing extends the refill intervals.The double nozzle can be retrofitted to any already installed system.- optimal lubrication on both sides of the chain- saves oil and increases wear protection- easy and flexible installation- perfect fit for the new multi-dispenser plate- optimally adjustable through individual, detachable sections- compatible with all Scottoiler systems

Dust cap brake caliper ATE 38 or 40mm

Dust caps from All Balls Racing - better breakaway torque and lower friction due to special grease coating