The 1-piece racing side fairing for the BMW S 1000 RR from 2017 replaces the original part using the original mounting points. The side fairing is a 1-piece version. the upper part of the side fairing is already incorporated into the carbon part. Also the mounting is more easy with a 1 piece side fairing. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter!Race only - no ABE and TÜVThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

The carbon side fairing for the BMW S 1000 RR replaces the original piece using the original mounting points. On these carbon parts the upper part of the trim side fairing (plaque brackets) is manufactured as a single piece with the side fairings. separate plaque brackets are not required for our side fairings. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The 1-piece side racing fairing for the BMW S 1000 RR from 2017 replaces the original part using the original mounting points. The side fairing is a 1-piece version. the upper part of the side fairing is already incorporated into the carbon part. Also the mounting is more easy with a 1 piece side fairing. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter!Racing only - no ABE and TÜVThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

The carbon side fairing for the BMW S 1000 RR replaces the original piece using the original mounting points. On these carbon parts the upper part of the trim side fairing (plaque brackets) is manufactured as a single piece with the side fairings. separate plaque brackets are not required for our side fairings. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side fairing in carbon for the BMW K 1300 S is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side fairing on the left side of the BMW S 1000 RR Racing is part of the race fairing kit of the BMW S1000RR Racing. It is mounted via quick fasteners and not compatible with the original street fairing parts. A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. For an effortless mounting the use of the fairing holder kit is necessary. The facts   - racing part. not for street use - better wind protection - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The side fairing in carbon for the BMW S 1000 RR from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side fairing in carbon for the BMW S 1000 RR from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Fairing Side Panel Racing left BMW S 1000 RR starting from MY 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side fairing on the left side of the BMW M1000RR Racing is part of the race fairing kit of the BMW M1000RR Racing. It is mounted via quick fasteners and not compatible with the original fairing parts. A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The side fairing on the right side of the BMW M1000RR Racing is part of the race fairing kit of the BMW M1000RR Racing. It is mounted via quick fasteners and not compatible with the original fairing parts. A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The side fairing in carbon for the BMW K 1300 S is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The badge holder in carbon for the BMW S 1000 RR Straße (2010-2014) / HP 4 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The upper part of the side fairing in carbon for the BMW S 1000 RR (2015 - ) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÃœV Approved Quality

The carbon winglet for the BMW S 1000 RR Straße (2012-2014) / HP 4 replaces the original piece using the original mounting points. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon side winglet for the BMW S 1000 RR Straße (2012-2014) / HP 4 (2012-now) replaces the original piece using the original mounting points. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

BMW R1200RS LC Carbon slipstream deflector left R 1200 RS LC item Description Verkleidungswinglet left - BMW R 1200 RS (LC) from 2015 onwards. The slipstream deflector left carboxylic replaces the original device using the original fastening points.  In the foreground weight savings are (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

BMW R1200RS LC Carbon slipstream deflector right R 1200 RS LC item Description Verkleidungswinglet legal BMW R 1200 RS (LC) from 2015 onwards. The slipstream deflector right into Carbon replaces the original part using the original mounting points.  In the foreground weight savings are (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

Feder Seitenständer

Fahrzeugspezifische Information:  70 mm höher YSS Stoßdämpfer – TOP LINE Serie Mehr Fahrkomfort. Mehr Kontrolle. Mehr Qualität. Die YSS TOP LINE Serie bietet hochwertige Stoßdämpfer für alle, die ihr Fahrverhalten spürbar verbessern möchten – egal ob im Alltag, auf langen Touren oder im sportlichen Einsatz. Diese Serie steht für präzise Verarbeitung, moderne Technik und individuelle Einstellmöglichkeiten – ideal für anspruchsvolle Fahrerinnen und Fahrer sowie alle, die Wert auf Sicherheit, Komfort und Stil legen. Produkteigenschaften: • Hochwertige Gasdruck-Stoßdämpfer mit fein abstimmbarer Dämpfung • Robuste Aluminium-Bauweise, CNC-gefräst – leicht und langlebig • (Modellabhängig) mit externem Ausgleichsbehälter für konstante Performance • Fahrzeugspezifische Ausführung – einfacher Einbau ohne zusätzliche Anpassungen Einsatzbereiche: Für Roller, Motorräder und Custom Bikes – vom Stadtverkehr bis zur Kurvenfahrt am Wochenende. Die TOP LINE Stoßdämpfer holen das Beste aus deinem Fahrwerk heraus – spürbar stabiler, komfortabler und sicherer. Hinweis: • Die Federvorspannung ist stufenlos einstellbar (Arretierung über Gewindestift). • Zugstufenverstellung (30 Klicks)

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1100S Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Abschürfungen, Rost, ca. 38,5cm Teilenummer: 31422331295

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1100S Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Abschürfungen, Rost, ca. 36,5cm Teilenummer: 31422331295

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

Carbonfiber flap on the fairing left side BMW R 1250 RS strarting from MY 2019 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.