Choke Screw CV Carburetor

Clip Temperature Sensor

Closure Screw JMP   - M18X1.5X12- DIN 908- Zinc-platedTechnical Data:Type:   Oil Drain Screws    Closure Screws Thread:   M18 x 1.5 Diameter:   18 mmLength:   12 mmHead:   Flat Head Drive:   Internal Hexagon Surface:   Electro-galvanized Material:   Steel Color:   Silver DIN:   908 O-ring/Washers:   None Manufacturer:   JMP Bolt For Safety Wire:   No Technical Data:Thread:   M18 x 1.5 Length:   12 mmHead:   Round Head with Internal Hexagon Material:   Steel Color:   Gray For Safety Wire:   No O-ring/Washers:   No Magnetic:   No

Clutch Bolt Stainless Steel   - Total Length: 98.5mm - Diameter: 8mm

n.v.

Vehicle-Specific Information: For high handlebars

Vehicle-Specific Information: for raised handlebarsOur cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of a maximum of 4.5 cm. This means that some shafts are up to a maximum of 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.   To increase our delivery capability and reduce your inventory, we have consolidated certain lengths of speedometer and tachometer shafts in increments of up to 4.5 cm. This means that some shafts are up to 4.5 cm longer than the original shaft. Your advantage: With just a few shafts, you cover the entire range.

Clutch Cover BMW S1000 RR Stocksport from 2017 Racingpart no Tüv or ABE The clutch cover in Carbon for the BMW S 1000 RR Stocksport is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. Picture similar

The carbon clutch cover for the BMW S 1000 R (2014-now) / S 1000 RR Street (2010-now) / HP 4 (2012-now) is glued to the original clutch cover. This part is an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon clutch cover for the BMW S 1000 RR Stocksport/Racing (2010-now) is glued to the original clutch cover. This part is an addition to the original components on the motorcycle and helps to protect the motorcycle. The parts are eighter mounted on original fastening points or glued on the surface with specially delivered glue-strips. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

Clutch Friction Plate Note: 6 pieces are required.

Clutch Push Piston

Clutch Release Lever Clutch Lever for R850 + R1100 transmission with clutch cable Improved version Due to numerous requests from you, we have searched for a solution to a common problem and developed this improved clutch release lever. It is mounted on the back of the transmission and accommodates the clutch cable. Never again should your tour abruptly end somewhere in the middle of nowhere. The clutch release levers often break at the bottom of the transmission. Original spare parts are often unavailable. Therefore, we have manufactured a reinforced clutch lever from high-strength aluminum. We have increased the material thickness by about 30%. During the next transmission repair or clutch replacement, this lever can replace the original, reducing a critical point on your motorcycle. Alternatively, you can take it as a spare part (emergency tool) on your travels for emergencies. We have already saved some of you on vacation, trips, or tours with a DHL Express delivery. This option is, of course, also available. As roadside assistance, we ship spare parts, like this lever, as well as many other items, around the globe to help you. This lever corresponds to the BMW ETK part number 23131340829. The lever 23 13 1 340 829 fits the following vehicles: R 850 GS Type 259 R 1100 GS Type 259 R 850 R Type 259 R 1100 R Type 259 R 850 RT Type 259 R 1100 RT Type 259 R 1100 RS Type 259 NOTE: The original bearing sleeve and adjustment screw must be retained!

Clutch Screw Attention: 6 pieces are required!

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

  Complete Gasket Set Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949.   In the off-road world, the Athena pool of engineers and technicians collaborates with leading international teams from MXGP and AMA Supercross to develop new product lines.   Athena products undergo rigorous quality testing to guarantee customers high standards in terms of performance, competitiveness, and reliability.   Athena offers the largest selection of replacement gaskets and gasket sets available on the market, with over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs.    

  Complete Gasket Set Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949.   In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines.   Athena products undergo rigorous quality testing to guarantee customers high standards in terms of performance, competitiveness, and reliability.   Athena offers the largest selection of replacement gaskets and gasket sets available on the market, with over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs.    

Complete Gasket Set Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949.   In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines.   Athena products undergo rigorous quality testing to guarantee customers high standards in terms of performance, competitiveness, and reliability.   Athena offers the largest selection of replacement gaskets and gasket sets available on the market, with over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs.

This is a new part offered Vehicle: K110LT Manufacturer: BMW Condition: New with storage marks Description: sold as shown Part number: 31422310348 Fits the following vehicles according to part number:

Oil Seal Corteco   Corteco seals in original quality are characterized by their outstanding sealing properties and a long service life.Technical Data:Inner Diameter:   22 mmOuter Diameter:   35 mmWidth:   7 mm

Socket Head Screw Grip Unit M5X45

Carbonfiber Cover near the Instrument left side BMW R 1250 RS (LC) MY19 It ontributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.