BMW F 650 GS F650GS G650GS G 650 GS Luggage rack silver The facts in pipe construction: • highest safety - especially developed for Hepco & Becker developed top case • Vehicle Development • Robust and elegant design • Precision fit, easy installation • Rotating attachment for luggage straps • metal pipe from a German steel forge • High-quality metal coating • Comprehensive, easy-to-understand AnbauleitungNur for Hepco & Becker top boxes, not suitable for hand luggage! Vehicle-specific information: The luggage rack is mounted on the original bridge. ( Example Picture)

BMW F650GS twin F 650 GS F700GS Twin Alurack - black Top case Carrier Carrier Specific Alurack the highest quality for mounting an H & Topcases.Hepco & Becker aluminum racks are specially designed for our top cases and as the successor to the luggage rack made of tubular Aluracks are almost exclusively offered as All needed today. You can use it every top case of us, whether aluminum or plastic, mounted on this carrier and thus have large selection of different combinations. But not only newly purchased, even existing Hepco & Becker top boxes passen.Jedes Alurack is specially designed for the appropriate motorcycle and produced. Thanks to the construction of high-quality aluminum, the Alurack granted a high strength and a very elegant appearance. to the Alurack also provides additional attachment points for luggage straps fix example, roll bags. Generally, there is a model specific Alurack always consists of a model-specific basic carrier and the carrier plate on the Alurack then be mounted, the top case. The facts: • highest safety - especially developed for Hepco & Becker top case designed • Vehicle Development • Precision fit, easy installation • aluminum construction • Integral plastic trim for covering the fixing points • Rotating attachment for luggage straps • with mounting bracket for all Hepco & Becker top boxes • without headband for own luggage / spacers used • Comprehensive, easy-to-understand AnbauleitungNur for Hepco & Becker top boxes, not for side cases suitable! Model: F 650 GS Twin / 2008 ->

The fixed side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is screwed onto the carrier at the rear right and left and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tubing MADE IN GERMANY Firmly bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please observe model-specific notes from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 ltr. & 40 ltr. in combination. Firmly bolted to the motorcycle frame (no Lock-it system).

BMW F650GS twin F 650 GS F700GS twin F 700 GS Easyrack Topcase black EasyRack - the alternative to AlurackHepco & Becker Easy racks are specially designed for our top cases konzipiert.Sie ​​can so that every top case (except Orbit TC and standard TC) of us, whether aluminum or plastic mounted on this carrier and thus have large selection of different combinations. But not only newly purchased, even existing Hepco & Becker top boxes passen.Jedes Easyrack is specially designed for the appropriate motorcycle and produced. Thanks to the construction of high-quality aluminum, the Easyrack granted a high strength and a very elegant appearance. The Easyrack also provides additional attachment points for luggage straps for example, roll bags attach to können.Der highlight: the top case mounting necessary, the bracket disappears when not in use by simply moving in Easyrack and thus no longer interfere with the dynamic look of the motorcycle. The facts: • with folding bracket for own luggage and all Hepco & Becker top boxes • Made of aluminum, • High strength, high-quality optics • Integral plastic trim, • bracket with ball locking system and mechanical stop • Rotating attachment for luggage straps • Instead Alurack universally montierbarNur for Hepco not suitable & Becker top boxes for side cases! Model: F 650 GS Twin / 2008 -> / F 700 GS

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect both the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle a unique character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand installation instructions scope of delivery: right + left including mounting materials and instructions please refer to the provided installation instructions or vehicle-specific notes for any restrictions or warnings no ABE or registration is required

good protective effect in falls and crashes at low speed Indicators, clutch and brake levers, exhaust pipes, fairing parts, etc. are effectively protected high-quality powder coating including mounting materials  

Whether riding off-road or on asphalt, the Hepco&Becker hand guard provides reliable protection for the rider's hands and the motorcycle handlebars. powder-coated solid construction made of tubular steel, Made in Germany Scope of delivery: right + left + instructions + mounting materials usually fits only vehicles with original handlebar clamps please refer to the included installation instructions and vehicle-specific notes Vehicle-specific notes: can only be mounted in conjunction with the original hand protector.

Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our topcases. But not only new topcases fit. Older Hepco&Becker models can also be mounted. The basic mount has not changed.Not compatible are: Hepco&Becker Orbit Topcase and topcases with universal plate.The carriers are model-specific and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With the high-quality coating and proper care, the look is also preserved in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the topcase, but in the side cases or tank bag. usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions) including mounting materials and instructions MADE IN GERMANY the topcase is pushed onto the tube luggage rack and locked to the carrier with a metal locking mechanism Luggage racks generally do not require ABE or registration

The HEPCO&BECKER Tank Protection Bars perfectly follow the lines of the machine and give the motorcycle a unique character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are optimally absorbed by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front high-quality surface finish also useful for securing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting materials Engine protection bars do not need to be registered and do not require an ABE please refer to the attached installation instructions, as well as the model-specific notes for any potential restrictions Vehicle-specific notes: cannot be mounted alone, only in conjunction with H&B engine/tank protection bars for this model Fits BMW F 650 GS Twin / F 700 GS / F 800 GS model years 2008-2016

BMW F650GS Twin Throttle Cable Reduced Power F 650 GS TWIN 32737700908 Original BMW spare part. According to BMW part number, fits the following vehicles: F 650 GS TWIN Reduced Power Price = including shipping within Germany!

Von der G 650 X bekanntes und bewährtes modulares System basierend auf Handschutzbügel, mit 3 Ausbaustufen. Wirkungsvoller Schutz für Hände und Armaturen im Gelände, vor Büschen, Sträuchern, aufgewirbelten Steinen und bei Stürzen. Effektiver Wind- und Wetterschutz vor allem beim großen Handschutz in Verbindung mit Aufsatzspoiler. Leichte Montage / Demontage. Bei diesem Angebot handelt es sich um die Kunststoffschalen. Die Metallbügel müssen separat bestellt werden.

BMW F700GS F 700 GS Original Handguard Brackets for Hand Protectors Silver Product Description Complete set for right and left including all mounting parts and installation instructions. The brackets are made of stainless steel and can additionally be equipped with separately available protectors, providing perfect protection against wind and stone chips. Easy and quick installation. Attention!This item does not fit the F800GS or the F650GS.

BMW F700GS F 700 GS K70 Original Mounting Kit Windshield Holder Product Description This mounting kit includes the fastening materials for a windshield.

Original BMW Variokoffer for BMW F750GS and F850GS Left BMW Part Number: 77408569659 without lock cylinder

Original BMW Variokoffer for BMW F750GS and F850GS Right BMW Part Number: 77408569660 without lock cylinder

Original BMW Motorrad Variotopcase BMW Teilenummer: 77438569672 ohne Schließzylinder

BMW F800GS (K72) LED Mounting Kit New Additional Headlight F800GS Adventure (K75) Product Description Mount for LED additional headlights as a replacement part. Fits according to part number for the following vehicles: F 800 GS 13 F 800 GS Adventure

BMW R1200GS LC + Adve. original HP Sports exhaust ESD R 1200 GS product details   Slip-on muffler for robust sound and sporty look Torque increase in the low and medium speed range, performance levels series Hexagonal asymmetric shape, exclusive design for BMW Motorrad. Weight: approximately 4.7 kg including attachments (minimum weight reduction ( HP lettering in large and Akrapovič logo lasered in on small side face With road traffic approval (EU ABE) ¹ ¹ in force in the countries licensing requirements must be observed. Delivery: Supplied with installation instructions Material: Material made entirely of titanium (jacket connection tube and inner structure); End cap and heat shield made of carbon original BMW accessories - vehicle warranty remains !!!!

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Alurack has high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals.

Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the appearance of your motorcycle, but also emphasize the off-road look. effective protection against stone chips and runovers high-quality technical processing made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, adapted to the shape of the motorcycle including mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

Stable aluminum plate for widening on almost all luggage racks with a flat surface when loose luggage is to be transported instead of a top case. The raised edges and additional attachment points make the extension ideal for the safe transport of larger luggage rolls, travel bags, tents, sea bags, etc. Construction made of high-strength aluminum with a premium appearance Attachment options for straps Not suitable for top case mounting Includes mounting materials and instructions High-quality plastic coating Recommended load: 5kg (Please note the model-specific information as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported on the rear but in the side cases or tank bag.

The slim, lightweight, and discreet luggage solution from Hepco&Becker. The Minirack offers a way to securely attach soft luggage to the rear of the motorcycle. Side slots allow for a backpack or bag to be strapped down. Recommended load: 3-5kg (please pay attention to the vehicle-specific notes, the provided installation instructions, and the motorcycle manufacturer's specifications) NOT suitable for top cases no ABE or registration required high-quality powder coating solid construction made in Germany Vehicle-specific notes: Not suitable for Lock-it rear bag holders. Mini luggage bridge only suitable for luggage rolls/bags. No top case mounting possible!

Protects the upper area of the motorcycle. Solid construction including high-quality surface coating. The Hepco&Becker tank protection bars perfectly follow the lines of the machine and give the motorcycle an individual character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are optimally absorbed by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front high-quality coating useful for securing the motorcycle stable round tube made in Germany Scope of delivery: right + left + mounting materials Engine protection bars do not need to be registered and do not require ABE please refer to the attached installation instructions Vehicle-specific notes: only mountable in conjunction with original engine protection bars.

Our Hepco&Becker Lamp Guard protects the headlight in many cases and also gives your bike the proper off-road look. customized to the design of the motorcycle effective protection no reflections or danger from self-glare easy installation on most existing mounting points solid construction made of German steel robust and high-quality coating in Germany without ABE / TÜV.