This small but practical bag makes perfect use of the available space under the standard luggage bridge and fits individually or together with the side bags 045-5838 as if tailor-made!The attachment is done through sturdy and easy-to-mount straps, and the large, covered zipper allows for quick access to the contents.Conclusion: a small bag with great utility!-we do not use simple nylon, but certified Cordura fabric as used in motorcycle protective clothing and expedition gear-fabric inner side waterproof coated -Fluorocarbon impregnation and Teflon coating from DuPont with nano-technology as protection against moisture, dirt, oil, and fading-washable and easy to clean-the fabric used has been successfully tested for harmful substances according to Oeko-Tex Standard 100-built for extreme loads and long durability -best fit-secure attachment yet quickly removable from the vehicle-low weight with high payload and large usable volumeAttention: Please use a paint protection film if necessary! Dimensions: (L x W x H) approx. 20 x 20 x 4 cm Volume: approx. 1.5 liters.Color: black

Whether for a small evening ride, as a replacement for the oversized tank bag, or as additional luggage on a world tour – waterproof storage on the motorcycle is always useful! The crash bar bags from Touratech Waterproof are waterproof and dustproof welded. The robust, resilient material is already familiar to you from our Rack Packs. In the crash bar bags, it is even processed in a double layer.With 2 x 3 liters of packing volume, the bags offer ample space for your wallet, documents, snacks, or other small items.The water-protected YKK brand zipper can be easily operated even with thick gloves. The extra-large zipper garage effectively prevents rainwater from entering due to the wind while riding.Thanks to the vehicle-specific Velcro straps, the bags can be attached easily and securely to the fairing crash bar. Quickly find the contents thanks to the yellow interior. The material doubling provides additional protection for your items.The design of the crash bar bag integrates subtly into the lines of your R1250GS Adventure. The reflective strip enhances your passive safety through better visibility. Especially in rain and darkness, this is an unbeatable advantage.Sold as a set for both sides.Dimensions: (L x W x H) approx. 18 x 6 x 34 cmVolume: approx. 2 x 3 liters.

Ball Bearing

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Fully insulated bike battery disconnect switch for disconnecting the onboard network to preventdeep discharge of the battery due to constant consumers like clock, onboard computer,accessories, etc. during longer standstill periods.Disconnection is achieved simply by loosening the screw.Just loosen the screw by 1-2 turns and leave it in the switch. This way, it cannot be lost.For driving operation, please tighten it properly. Mini designFully insulated housingFlexible mounting between negative terminal and vehicle Load max. 160A - 12V / 10 sec. then pause for 30 sec.Bridge cable included.Installation instructions on product insert Dimensions:L / W / H: 62 x 25 x 38 mmCable: 200 mm

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

Battery Rubber Holder

Battery Strap Total Length: 200 mm

Quality ball bearings from SKFTechnical Data:Design:   Deep groove ball bearing Type:   6005 Inner diameter:   25.00 mmOuter diameter:   47.00 mmWidth:   12.00 mmSealing:   2 sealing discs Clearance:   Increased clearance (C3)

  Befestigung Seitenständer

Original BMW Bellows Rear Swingarm BMW Part Number: 33171452504

The long bellypan for the BMW S 1000 XR is an addition to the original components on the motorcycle and helps to protect the motorcycle. The Ilmberger Carbon S 1000 XR bellypan not only protects the lower part of the bike against dirt. it improves the very nice Design of the bike. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

QUICK & EASY DROP-IN INSTALLATION Spüren Sie den Leistungsunterschied! ENTWICKELT, UM DIE LEISTUNG ZU VERBESSERN UND LANGLEBIGKEIT ZU GARANTIEREN. Entwickelt und konstruiert für einen problemlosen Betrieb von mehr als 2.500 Stunden oder 100.000 Meilen. Verbesserte Polymere, Bürsten und Kommutatoren garantieren einen gleichmäßigen Durchfluss, eine gleichmäßige Stromaufnahme und einen leisen Betrieb. Ersetzt die BMW Teilenummer 16141341231.  

Bevel Drive Housing Protector Carbon - BMW R 1250 GS from 2019 and BMW R 1250 R and RS with splashback.The look of the carbonpart is unique and it protects the exposed spots of the bevel housing against rockfall or damage. Can be used with the rear splash guard! It will be mounted by tape which is included.   Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Bevel Drive Housing Protector Carbon - BMW R 1250 GS from 2019 without splashback.The look of the carbonpart is unique and it protects the exposed spots of the bevel housing against rockfall or damage. Can not be used with the rear splash guard!It will be mounted by tape which is included.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.You can find a short video of our part in the category product Videos!Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Bevel Drive Housing Protector Carbon - BMW R 1200 GS (LC from 2013) / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 without splashback This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Injector for Bing constant pressure carburetor type 64-3. - Replacement part for Bing carburetors: 64/26/301 - 64/26/304 64/26/315 - 64/26/318

Jet stock for Bing constant pressure carburetor type 64-3. Total length 27 mm; largest diameter 11.7 mm; hexagon SW 10 mm; thread M 12x1 and M 6

Washer for main jet for Bing constant vacuum carburetor type 64-3. Outer diameter 15 mm; Inner diameter 6.1 mm

Needle jet for Bing constant vacuum carburetor type 64-3. 4 grooves/indentations at the top; total length 53 mm; shaft diameter 2.4 mm; tip diameter 1.20 mm. - Replacement part for Bing carburetors: 64/26/315 - 318 64/32/311 - 312 64/32/335 - 336 64/32/347 - 354 64/32/357 - 362 64/32/375- 377(Ducati Indiana 650 US)- 379(Ducati Indiana 750 US)- - 381(Ducati Indiana 350)- - 383 - 385

Seal for rotary slide for Bing constant pressure carburetor type 64-3. Largest dimension 34x44 mm

Spring bracket for the attachment of the float chamber Bing constant pressure carburetor type 64-3.