Complete Gasket Set Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949.   In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines.   Athena products undergo rigorous quality testing to guarantee customers high standards in terms of performance, competitiveness, and reliability.   Athena offers the largest selection of replacement gaskets and gasket sets available on the market, with over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs.    

  Topend Gasket Set Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949.   In the off-road world, the Athena pool of engineers and technicians collaborates with leading international teams from MXGP and AMA Supercross to develop new product lines.   Athena products undergo rigorous quality testing to guarantee customers high standards in terms of performance, competitiveness, and reliability.   Athena offers the largest selection of replacement gaskets and gasket sets available on the market, with over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs.

BMW Original Spare Part Air Filter Insert Top Brand Quality

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to ensure optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be replaced regularly. They are also subject to wear. Only when everything in the braking system is free can it operate optimally!

Tapered Roller Bearing Set Koyo Manufactured by one of the leading Japanese bearing manufacturers (Koyo). Global original equipment manufacturer, high quality, 100% Made in Japan. - Without dust seal Dimensions of the bearings:- Upper bearing: 52X28X16- Lower bearing: 52X28X16Technical Data:Type:   Tapered Roller Bearing Manufacturer:   Koyo Outer Diameter:   52 mmInner Diameter:   28 mmHeight:   16 mmOuter Diameter:   52 mmInner Diameter:   28 mmHeight:   16 mm

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand installation instructions Scope of delivery: right + left including mounting materials and instructions any restrictions or notes can be found in the provided installation instructions or the vehicle-specific notes no ABE or registration required

The permanently bolted side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is bolted to the rear right and left of the carrier and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the legs of the rider or passenger in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tubing MADE IN GERMANY Permanently bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please note model-specific information from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Side case recommendations: Junior 30, Alu-Exclusiv 30, Alu-Standard 35, Xplorer 30.

BMW F 650 GS F650GS G650GS G 650 GS Luggage rack silver The facts in pipe construction: • highest safety - especially developed for Hepco & Becker developed top case • Vehicle Development • Robust and elegant design • Precision fit, easy installation • Rotating attachment for luggage straps • metal pipe from a German steel forge • High-quality metal coating • Comprehensive, easy-to-understand AnbauleitungNur for Hepco & Becker top boxes, not suitable for hand luggage! Vehicle-specific information: The luggage rack is mounted on the original bridge. ( Example Picture)

BMW F650GS twin F 650 GS F700GS Twin Alurack - black Top case Carrier Carrier Specific Alurack the highest quality for mounting an H & Topcases.Hepco & Becker aluminum racks are specially designed for our top cases and as the successor to the luggage rack made of tubular Aluracks are almost exclusively offered as All needed today. You can use it every top case of us, whether aluminum or plastic, mounted on this carrier and thus have large selection of different combinations. But not only newly purchased, even existing Hepco & Becker top boxes passen.Jedes Alurack is specially designed for the appropriate motorcycle and produced. Thanks to the construction of high-quality aluminum, the Alurack granted a high strength and a very elegant appearance. to the Alurack also provides additional attachment points for luggage straps fix example, roll bags. Generally, there is a model specific Alurack always consists of a model-specific basic carrier and the carrier plate on the Alurack then be mounted, the top case. The facts: • highest safety - especially developed for Hepco & Becker top case designed • Vehicle Development • Precision fit, easy installation • aluminum construction • Integral plastic trim for covering the fixing points • Rotating attachment for luggage straps • with mounting bracket for all Hepco & Becker top boxes • without headband for own luggage / spacers used • Comprehensive, easy-to-understand AnbauleitungNur for Hepco & Becker top boxes, not for side cases suitable! Model: F 650 GS Twin / 2008 ->

The fixed side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is screwed onto the carrier at the rear right and left and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the rider's or passenger's legs in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tubing MADE IN GERMANY Firmly bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please observe model-specific notes from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side, e.g., 30 ltr. & 40 ltr. in combination. Firmly bolted to the motorcycle frame (no Lock-it system).

BMW F650GS twin F 650 GS F700GS twin F 700 GS Easyrack Topcase black EasyRack - the alternative to AlurackHepco & Becker Easy racks are specially designed for our top cases konzipiert.Sie ​​can so that every top case (except Orbit TC and standard TC) of us, whether aluminum or plastic mounted on this carrier and thus have large selection of different combinations. But not only newly purchased, even existing Hepco & Becker top boxes passen.Jedes Easyrack is specially designed for the appropriate motorcycle and produced. Thanks to the construction of high-quality aluminum, the Easyrack granted a high strength and a very elegant appearance. The Easyrack also provides additional attachment points for luggage straps for example, roll bags attach to können.Der highlight: the top case mounting necessary, the bracket disappears when not in use by simply moving in Easyrack and thus no longer interfere with the dynamic look of the motorcycle. The facts: • with folding bracket for own luggage and all Hepco & Becker top boxes • Made of aluminum, • High strength, high-quality optics • Integral plastic trim, • bracket with ball locking system and mechanical stop • Rotating attachment for luggage straps • Instead Alurack universally montierbarNur for Hepco not suitable & Becker top boxes for side cases! Model: F 650 GS Twin / 2008 -> / F 700 GS

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect both the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle a unique character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand installation instructions scope of delivery: right + left including mounting materials and instructions please refer to the provided installation instructions or vehicle-specific notes for any restrictions or warnings no ABE or registration is required

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

good protective effect in falls and crashes at low speed Indicators, clutch and brake levers, exhaust pipes, fairing parts, etc. are effectively protected high-quality powder coating including mounting materials  

Whether riding off-road or on asphalt, the Hepco&Becker hand guard provides reliable protection for the rider's hands and the motorcycle handlebars. powder-coated solid construction made of tubular steel, Made in Germany Scope of delivery: right + left + instructions + mounting materials usually fits only vehicles with original handlebar clamps please refer to the included installation instructions and vehicle-specific notes Vehicle-specific notes: can only be mounted in conjunction with the original hand protector.

Proven Tube Luggage Racks Topcase Carriers for Hepco&Becker Topcases in the highest quality. Hepco&Becker luggage racks are specifically designed for almost all of our topcases. But not only new topcases fit. Older Hepco&Becker models can also be mounted. The basic mount has not changed.Not compatible are: Hepco&Becker Orbit Topcase and topcases with universal plate.The carriers are model-specific and fit only the motorcycle listed in the installation instructions. Thanks to the construction from German quality steel, Hepco&Becker luggage racks ensure maximum strength and very high safety. With the high-quality coating and proper care, the look is also preserved in the long term. If necessary, soft luggage can also be secured without any problems. The tube luggage rack offers many possibilities. If space is insufficient, the rack can be combined with the Hepco&Becker universal luggage rack extension. Recommended load: 5kg (Please note the model-specific instructions for each carrier, as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported in the topcase, but in the side cases or tank bag. usually combinable without problems with side case carriers or C-Bow holders (please refer to the installation instructions) including mounting materials and instructions MADE IN GERMANY the topcase is pushed onto the tube luggage rack and locked to the carrier with a metal locking mechanism Luggage racks generally do not require ABE or registration

The HEPCO&BECKER Tank Protection Bars perfectly follow the lines of the machine and give the motorcycle a unique character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are optimally absorbed by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front high-quality surface finish also useful for securing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting materials Engine protection bars do not need to be registered and do not require an ABE please refer to the attached installation instructions, as well as the model-specific notes for any potential restrictions Vehicle-specific notes: cannot be mounted alone, only in conjunction with H&B engine/tank protection bars for this model Fits BMW F 650 GS Twin / F 700 GS / F 800 GS model years 2008-2016

BMW F650GS Twin Throttle Cable Reduced Power F 650 GS TWIN 32737700908 Original BMW spare part. According to BMW part number, fits the following vehicles: F 650 GS TWIN Reduced Power Price = including shipping within Germany!

  Alternator Cover Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

  Valve Cover Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.

Von der G 650 X bekanntes und bewährtes modulares System basierend auf Handschutzbügel, mit 3 Ausbaustufen. Wirkungsvoller Schutz für Hände und Armaturen im Gelände, vor Büschen, Sträuchern, aufgewirbelten Steinen und bei Stürzen. Effektiver Wind- und Wetterschutz vor allem beim großen Handschutz in Verbindung mit Aufsatzspoiler. Leichte Montage / Demontage. Bei diesem Angebot handelt es sich um die Kunststoffschalen. Die Metallbügel müssen separat bestellt werden.

BMW F700GS F 700 GS Original Handguard Brackets for Hand Protectors Silver Product Description Complete set for right and left including all mounting parts and installation instructions. The brackets are made of stainless steel and can additionally be equipped with separately available protectors, providing perfect protection against wind and stone chips. Easy and quick installation. Attention!This item does not fit the F800GS or the F650GS.

BMW F700GS F 700 GS K70 Original Mounting Kit Windshield Holder Product Description This mounting kit includes the fastening materials for a windshield.