SI - Friction MaterialFull metallic with corrosion-resistant coating.Good durability even in wet conditions.Solid friction coefficient behavior.Versatile use in off-road conditions.Suitable for both front and rear axles.

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

RSI - Friction MaterialFull metallic with anti-corrosion coating.Aggressive friction coefficient, very high braking performance.Higher wear than SI mixture.Also suitable for Supermoto use.Applicable for front and rear axle. Restriction for HusabergAll Brembo models with two-piston caliper

SI - Friction MaterialFull metallic with corrosion-resistant coating.Good durability even in wet conditions.Solid friction coefficient behavior.Versatile use in off-road conditions.Suitable for front and rear axle use. Restriction for HusabergAll Brembo models with two-piston caliper

Standard Pad Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.

BMC Replacement Air Filter   The acquired know-how from the racetracks is directly incorporated into the production of the series filters, to provide the demanding motorcyclist with a product that is tested, delivers performance, and is in a constant state of evolution.   The materials used are the best currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made from a special cotton fabric (4 layers), soaked in a low-tack oil.   It is encased in an aluminum mesh that is treated with an epoxy solution to resist gasoline vapors and oxidation. Additionally, the cotton has the advantage of being washable and reusable.   Due to these features, the BMC sport air filters (replacement air filters) guarantee a higher airflow compared to the original paper filters, a minimal pressure loss of the incoming air, and thus lead to better engine performance.   - Durability: washable and reusable, no replacement needed - Wider filter surface - Maximum air permeability (4 layers of cotton) - Higher absorption and filtration - Better pressure drop ratio - Tested by international testing procedures

Original BMW Variokoffer for BMW F750GS and F850GS Left BMW Part Number: 77408569659 without lock cylinder

Original BMW Motorrad Variotopcase BMW Teilenummer: 77438569672 ohne Schließzylinder

BMW F800GS (K72) LED Mounting Kit New Additional Headlight F800GS Adventure (K75) Product Description Mount for LED additional headlights as a replacement part. Fits according to part number for the following vehicles: F 800 GS 13 F 800 GS Adventure

BMW R1200GS LC + Adve. original HP Sports exhaust ESD R 1200 GS product details   Slip-on muffler for robust sound and sporty look Torque increase in the low and medium speed range, performance levels series Hexagonal asymmetric shape, exclusive design for BMW Motorrad. Weight: approximately 4.7 kg including attachments (minimum weight reduction ( HP lettering in large and Akrapovič logo lasered in on small side face With road traffic approval (EU ABE) ¹ ¹ in force in the countries licensing requirements must be observed. Delivery: Supplied with installation instructions Material: Material made entirely of titanium (jacket connection tube and inner structure); End cap and heat shield made of carbon original BMW accessories - vehicle warranty remains !!!!

JMP Guide Bushings Set for Fork Tube Made of hardened steel, Teflon copper coatedTechnical Data:Inner Diameter: 45.00 mmHeight: 15.00 mmWall Thickness: 2.50 mm

  Exhaust Gasket Athena   Athena, an international company founded in 1973, develops and manufactures gaskets, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement gaskets available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of gaskets with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.Technical Data:Inner Diameter:   28.70/35.00 mmOuter Diameter:   45.00 mmThickness:   0.80 mmScrew Fastening:   none

  EBC Brake Discs. MADE IN UK. The goal in development is to improve braking performance compared to the original brake disc. EBC uses HPSR steel with a low carbon content, which has an 18% higher coefficient of friction. This steel is significantly more resistant to rust than cast steel. Additionally, the entire surface is protected with a 3-micron thick zinc coating, which wears off in the brake pad contact zone during the bedding-in process. Only in this area can light surface rust form after prolonged periods of inactivity.   The brake discs are drilled in a bird wing design to minimize the number of holes while optimizing the cleaning of the brake disc from rainwater and brake dust. The fewer holes there are, the better the wet braking performance and the lower the wear.   - Rigid brake disc. - Made from rolled HPSR steel with low carbon content. - Brake surface drilled with an optimized hole pattern. - Radially ground. - Zinc-coated for corrosion protection. - EBC recommends EBC Organic brake pads or for sporty riders EBC Double-H sintered brake pads. - Standalone design. Technical Data:Outer Diameter:   265 mmInner Diameter:   137.2 mmBolt Circle:   160 mmNumber of Holes:   5 Hole Diameter:   10.5 mmThickness:   5 mmDesign:   rigid Manufacturer:   EBC

Top case carrier consisting of a model-specific mounting kit and the Alurack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate)Each Alurack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to the manufacturing from high-quality aluminum combined with a steel base carrier, the Alurack has high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Alurack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Easyrack top case carrier, except that the bracket for the top case attachment stands rigidly upwards and cannot be folded the model-specific base carrier is the same for both Easyrack and Alurack to accommodate the Hepco&Becker Alu Standard top case 35, a special bracket is required instead of the normal Alurack bracket (item number: 700007350 or 700007351) luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, as well as motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Developed for the standard condition of the machine. Not tested with accessories such as exhaust, license plate holder, or other turn signals.

Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the appearance of your motorcycle, but also emphasize the off-road look. effective protection against stone chips and runovers high-quality technical processing made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, adapted to the shape of the motorcycle including mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

Stable aluminum plate for widening on almost all luggage racks with a flat surface when loose luggage is to be transported instead of a top case. The raised edges and additional attachment points make the extension ideal for the safe transport of larger luggage rolls, travel bags, tents, sea bags, etc. Construction made of high-strength aluminum with a premium appearance Attachment options for straps Not suitable for top case mounting Includes mounting materials and instructions High-quality plastic coating Recommended load: 5kg (Please note the model-specific information as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported on the rear but in the side cases or tank bag.

The slim, lightweight, and discreet luggage solution from Hepco&Becker. The Minirack offers a way to securely attach soft luggage to the rear of the motorcycle. Side slots allow for a backpack or bag to be strapped down. Recommended load: 3-5kg (please pay attention to the vehicle-specific notes, the provided installation instructions, and the motorcycle manufacturer's specifications) NOT suitable for top cases no ABE or registration required high-quality powder coating solid construction made in Germany Vehicle-specific notes: Not suitable for Lock-it rear bag holders. Mini luggage bridge only suitable for luggage rolls/bags. No top case mounting possible!

Protects the upper area of the motorcycle. Solid construction including high-quality surface coating. The Hepco&Becker tank protection bars perfectly follow the lines of the machine and give the motorcycle an individual character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are optimally absorbed by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front high-quality coating useful for securing the motorcycle stable round tube made in Germany Scope of delivery: right + left + mounting materials Engine protection bars do not need to be registered and do not require ABE please refer to the attached installation instructions Vehicle-specific notes: only mountable in conjunction with original engine protection bars.

Through countless test and travel kilometers, we have experienced that the weak point of many original wheels is the rim rings. With our rim ring sets, you can address this shortcoming without having to purchase an entirely new wheel! Excel rim rings in the best quality have been synonymous with premium quality for years. Numerous world championship titles have already been won in off-road sports with Excel rims manufactured by Haan Wheels.The black rim rings "made in Japan" also look extremely good. In our opinion, they are by far the best rims on the market!The Touratech Racing Team exclusively rides on Excel!Scope of delivery:- Excel rim ring *black*- 36 stainless steel spokes- 36 matching spoke nipplesHub, chainring, and brake discs are not included in the deliveryNo TÜV approvalThe rim dimensions correspond to those of the original rims and thus facilitate the registration via individual acceptance.BMW F800GS: for all model years!

Our Hepco&Becker Lamp Guard protects the headlight in many cases and also gives your bike the proper off-road look. customized to the design of the motorcycle effective protection no reflections or danger from self-glare easy installation on most existing mounting points solid construction made of German steel robust and high-quality coating in Germany without ABE / TÜV.

Fork Retaining Ring Original Spare Part

With both feet on the ground! With our MIZU rear lowering kit, you can achieve an optimal seat height for your bike. This means more riding pleasure and more safety for you - because only with the right stance does biking become truly enjoyable! Our rear height and lowering kits provide riding fun at the highest level, are manufactured in Germany, and come with ABE, eliminating the need for a costly registration in the vehicle documents. Delivery includes ABE & installation instructions 2 years manufacturer's warranty (more info in the imprint under contract information) High-quality material Manufactured in Hilzingen, Germany according to ISO 9001 This component is suitable for the following models: BMW F 650 GS from 08 Type E8GS, 25 mm F 800 R from 15, 35 mm ABE F 800 R from 16 E8ST, 35 mm ABE Important Notes: You have chosen a product from MIZU, which has been manufactured according to MIZU specifications and provides you with the highest safety. Please note the following when using our rear lowering kit In general, we recommend having our accessory products installed by a specialized workshop. Experience and expertise cannot be replaced by the following installation instructions. Please ensure a safe stand for your motorcycle before starting work on your vehicle. This product may only be used for the motorcycle type mentioned and listed on the usage list. Do not attempt to install this product on another motorcycle type, another manufacturer, model, or year of manufacture. Always use the manufacturer's torque specifications. Check and ensure that the lowering kit does not come into contact with other parts of the motorcycle. The kit must not touch anything. The spring movements must not be affected by the installation of the kit. If the spring movements are affected, adjust the position of the restricting components (e.g., luggage rack) so that the movement is no longer affected. Please do not forget to check the screws again. It is generally necessary to adjust the operating weight to the conditions. Please pay attention to the rider's weight and the correct spring rate. In general, the original springs are designed by most manufacturers for a rider weight of 85 kg. With our lowering kit, the compression travel is limited. Failure to consider the spring rate in conjunction with the total weight may result in the rear wheel contacting the inner fender.

Die 20 mm niedrigere Sitzbank in Schwarz erleichtert das Auf- und Absteigen und verbessert die Bodenerreichbarkeit. Viele Fahrer fühlen sich dank der reduzierten Sitzhöhe sicherer, weil sie ihre Maschine leichter rangieren und kontrollieren können. Drei rote Streifen inklusive BMW Motorrad Schriftzug unterstreichen die sportliche Optik. Leichteres Auf- und AbsteigenBessere Bodenerreichbarkeit20 mm niedriger als SeriensitzbankFarbe: Schwarz

The JT Sprockets manufacturing facility is today the largest and most modern production site for sprockets and chainwheels worldwide, equipped among other things with the latest generation of CNC manufacturing machines.JT Sprockets produces the entire range of sprockets and chainwheels for the aftermarket and original equipment. Each sprocket and chainwheel goes through 25 production stages and is subjected to more than ten individual quality checks to successfully leave production. JT Sprockets manufactures in the right way: through turning, milling, and drilling! This is the only way to achieve the highest quality with the lowest tolerances and the best tooth profile.After the subsequent heat treatment, each item is manually inspected - thus, JT Sprockets sets new quality standards in the motorcycle industry.Technical Data:Pitch: 520 Inner Diameter: 136 mmBolt Circle: 160 mmDrilling: 8.5 mmNumber of Holes: 6 Screw Type: Flat Head Number of Teeth: 49 Sprocket Type: Steel Manufacturer: JT