With the comfortable backrest for the aluminum top case, the passenger enjoys more comfort both on short trips and on long tours. Increased comfort for the passenger. Reduces fatigue on long distances. Additional Information

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Battery terminal distributor to simplify hard-to-reach connection work on the motorcycle battery. Simply connect to both terminals, and in the future, additional consumers such as navigation devices or sockets for mobile phone chargers can be easily connected.   -Protected connections -Easy installation -Fuse for + lead included - Length: 10 cm    

Bevel Drive Housing Protector Carbon - BMW R 1250 GS from 2019 and BMW R 1250 R and RS with splashback.The look of the carbonpart is unique and it protects the exposed spots of the bevel housing against rockfall or damage. Can be used with the rear splash guard! It will be mounted by tape which is included.   Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Bevel Drive Housing Protector Carbon - BMW R 1250 GS from 2019 without splashback.The look of the carbonpart is unique and it protects the exposed spots of the bevel housing against rockfall or damage. Can not be used with the rear splash guard!It will be mounted by tape which is included.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Our proven headlight guard made of coated, 2 mm thick stainless steel effectively protects the headlight of your GS.With the quick-release mechanism, you can easily clip on or remove the guard as needed. It is perfectly adapted to the design and functionality of the headlight. The protector has cutouts for the new X-shaped daytime running lights and is ideally suited for the optionally available cornering light from BMW.Of course, everything necessary for installation is included in the delivery.The headlight guard is designed for OFF-road use and is not permitted under the German Road Traffic Regulations (StVO). Please check your national regulations!

Top case holder black for aluminum top case for BMW R1250GS + Adv. R1200GS + Adv. from 2017 The sturdy top case holder made of powder-coated stainless steel allows for secure attachment of the Atakama luggage roll or other luggage items. Additionally, the luggage bridge can be used as a handle during enduro rides. Sturdy luggage holder made of stainless steel. Additional support during off-road use. Attractive design. Color: Black powder-coated.

BMW mirror package black / silver Option 719 for R1250GS + Adventure, R1200R LC, R1250R RS including mounting parts

The BMW ConnectedRide Cradle Smartphone Holder is a mount that allows you to use your smartphone on your BMW motorcycle, particularly as a GPS. BMW part number: old 77521691964, new 77521542248 A connected BMW Connected Ride Cradle Smartphone Holder: With the BMW Motorrad Connected app (minimum version 4.0), you can view vehicle data while riding, such as: lean angle, acceleration, and deceleration. The connection and pairing are only performed once during the initial setup.If your motorcycle is equipped with a Multicontroller and the optional equipment "Onboard Computer Pro," additional functions can be utilized.When you connect your phone via Bluetooth (Bluetooth Low Energy version 4.2 minimum), you can use the application with the same controls as for the GPS Navigator VI.Once mounted on the holder, your phone will be charged, either via induction (according to Qi standard, 7.5 W max.) or via USB-C port (7.5 W, 1.5 A for 5 V). An LED display shows you the charging status, and this display can be turned off. BMW Cradle ConnectedRide Smartphone Compatibilities: The holder can be locked for additional security on compatible motorcycles.The Connected Ride Cradle BMW holder is compatible with older motorcycle models. It adapts to all models that have the preparation for GPS installed. Models with a Multicontroller have the option to retrofit the GPS preparation through the BMW Motorrad workshop system (except for the models BMW R1200RT, R1250RT, and K1600).The cradle cannot be attached to the 4-button GPS holder.It is compatible with smartphones with dimensions: minimum 130.1 x 65.5 x 6.9 mm; maximum 162.5 x 78.1 x 8.8 mm. The support sides are individually adjustable to optimally fit your smartphone. Especially during induction charging or to have an optimal and secure position, it may be necessary to remove the protective smartphone case if it is in the way.The holder is compatible with the following smartphones, for example:- iPhone: iPhone 7, iPhone 8, iPhone 8 Plus, iPhone X, iPhone XS, iPhone XS Max, iPhone XR, iPhone 11, iPhone 11 Pro, iPhone 11 Pro Max, iPhone SE 2, iPhone 12, iPhone 12 Mini, iPhone 12 Pro, iPhone 12 Pro Max, iPhone 13, iPhone 13 Mini, iPhone 13 Pro, iPhone 13 Pro Max- Samsung: Galaxy A3, Galaxy A8, Galaxy A8 Plus, Galaxy A9, Galaxy S8, Galaxy S8 Plus, Galaxy S9, Galaxy S9 Plus, Galaxy S10, Galaxy S20, Galaxy S21 Ultra 5G, Galaxy S20 FE, Galaxy Note 8, Galaxy Note 9, Galaxy Note 10, Galaxy Note 10 Plus, Galaxy Note 20 Ultra- Huawei: P20, P30- Google: Pixel 2 XL- HTC: Le More information about the BMW Motorrad Smartphone Holder: The holder has a total weight of 204 g, and its dimensions are: L: 94.8–111.85 mm x W: 144.07–180.47 mm x H: 41.02 mm. Therefore, it does not interfere with your riding or handling of the vehicle.The BMW Motorrad Smartphone Holder ConnectedRide Cradle is protected against environmental and weather conditions according to IP65 standard, making it dust and water-resistant. Ensure that your smartphone is also resistant to these elements in bad weather.Designed for use with a smartphone, the holder naturally protects your phone from motorcycle vibrations. Compatible motorcycle modelsC 400 GT - K08 - (0C06 0C16) - [2018-2020] C 400 GT 21 - K08 - (0C61, 0C63) - [2021-2022] C 400 X - K09 - (0C09 0C19) [2018-2020] C 400 X 2021 - K09 - (0C31, 0C33) [2021-2022] F 750 GS - K80 - (0B08 0B18) [2016-2022] F 850 GS - K81 - (0B09 0B19) - [2016-2022] F 850 GS ADVE - K82 - (0K01 0K03) - [2017-2022] F 900 R - K83 (0K11, 0K13) - [2019-2022] F 900 R A2 - K83 - (0K31) - [2018-2022] F 900 XR (0K21, 0K23) - [2019-2022] F 900 XR A2 - K84 - (0K41) - [2019-2022] S 1000 R - K63 - (0E51, 0E53) - [2021-2022] S 1000 XR - K49 - (0D03 0D13) - [2014-2019] S 1000 XR - K69 - (0E41 0E43) - [2019-2022] R 1200 GS 2013 - K50 - (0A01 0A11) - [2012-2016] R 1200 GS 2017 - K50 - (0A51 0A61) - [2016-2019] R 1200 GS Adve 2014 - K51 - (0A02 0A12) - [2013-2018] R 1200 R 2015 - K53 - (0A04 0A14) - [2014-2018] R 1200 RS - K54 - (0A05 0A15) - [2014-2018] R 1250 GS - K50 - (0J91 0J93) - [2018-2020] R 1250 GS 2021 - K50 - (0M01, 0M03) - [2020-2022] R 1250 GS Adve - K51 (0J51 0J53) - [2018-2020] R 1250 GS Adve 2021 - K51 - (0M11, 0M13) - [2020-2022] R 1250 R 2019 - K53 - (0J71 0J73) - [2018-2022] R 1250 RS 2019 - K54 - (0J81 0J83) - [2018-2022]

Artikelnummer: 76 61 5 A82 561Praktischer Schlüsselanhänger mit GS Logo sowie Metallring mit BMW Motorrad Schriftzug.ProdukthighlightsBMW Motorrad Schriftzug mit StreifenBMW Motorrad Gravur auf dem SchlüsselringEckdatenMaterial: 100 % Baumwoll-Canvas

Artikelnummer: 76 61 5 A82 572Praktischer Schlüsselanhänger mit Make Life a Ride Schriftzug und großem, eingewebtem BMW Motorrad Schriftzug.ProdukthighlightsKleiner Make Life a Ride SchriftzugGroßer BMW Motorrad SchriftzugEckdatenMaterial: 100 % Baumwolle

BMW Original Spare Part Air Filter Insert Top Brand Quality

The high-quality tail bag is specifically designed for attachment to the original luggage rack of the BMW R1200/1250GS. Made from coated Cordura fabric, it is water-repellent and durable. With a zipper and compression straps, it offers a variable volume of 15 to 25 liters. Vehicle-specific notes: in combination with the original luggage bridge.

The brake fluid reservoir is quite openly accessible on the BMW. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut aluminum effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.Not suitable for equipment variants with original BMW frame protection!

The mounting adapter is simply attached to the handlebar clamps of your BMW. All of our GPS mounts fit perfectly on its 12 mm strut. This allows you to easily and securely attach your GPS device. The view of the instruments remains unobstructed.Mounting adapter / GPS mount / Navigation device holder

Our headlight guard has proven itself thousands of times over the years. Even larger debris cannot harm the headlight of your machine!Equipped with a quick-release mechanism and made of robust stainless steel with a black powder-coated surface!This allows you to easily clip on or remove the headlight guard as needed. Only the side struts are securely and firmly bolted.Of course, everything necessary for installation is included in the delivery.The headlight guard is designed for off-road use and is not permitted under the German Road Traffic Regulations (StVO). Please check your national regulations!

The top case mount provides the ideal connection between the BMW top case and the motorcycle. It is made of electropolished, stainless steel and allows for easy installation of the Vario top case. Additionally, the mount offers extra tie-down points for securing luggage. Easy attachment of the BMW top case. Enduro-style appearance. Additional tie-down options for luggage. Additional Information

The Vario top case with a patented adjustment mechanism offers variable storage space from 25 to 35 liters. The volume can be easily adjusted by flipping a lever, allowing for customization to individual needs. The Vario top case, made of robust plastic, is waterproof, off-road capable, and features a large GS logo. Practical options include a custom inner bag and a backrest. Variable volume from 25 to 35 liters. Perfect connection to the motorcycle. Waterproof and off-road capable. Patented adjustment mechanism. Additional Information Scope of Delivery: Delivery without top case holder, backrest, and without locking cylinder Material: Black plastic top case with newly designed aluminum insert in the lid Additional Information: Necessary Additional Parts: For installation, you additionally need the Top case holder for luggage bridge (8523743) and 1x repair kit locking cylinder (7698202) 1x backrest (7688877)

The frame protector made of black plastic effectively protects the frame from scratches and prevents wear spots caused by motorcycle boots. Frame protector made of polyamide Protects the frame from scratches Especially during heavy boot use off-road Color: black (textured) Fits the following vehicles: - R1200GS LC - R1200GS LC Adventure - R1250GS - R1250GS Adventure

The Variokoffer with patented adjustable mechanism offers a storage capacity of 30 to 39 liters. The variable volume is particularly beneficial in city traffic, as the width of the case can be reduced simultaneously. The Variokoffer is also waterproof and suitable for off-road use. Prerequisite are the mounts for Variokoffer (support at the passenger footpeg holders). These variable motorcycle cases do not fit the mounts for the BMW aluminum cases. Order the programmable locking cylinders with the part number 1001-51257698202 at the same time. One locking cylinder is required per case/top case. You can adapt these to your motorcycle key, allowing you to lock all locks with the vehicle key.

To be able to maneuver the GS sportily off-road, we have developed a brake lever that includes all the details that we believe are still missing from the original lever:The Touratech brake lever for the GS features a foldable end piece made of electropolished stainless steel, making it resilient even against harsh impacts.Additionally, it is infinitely adjustable, allowing it to fit any foot and riding style! Compared to the original, the Touratech brake lever is adjustable in length by +5/-5mm and in height by +4/+10mm. This significantly eases braking while standing.As a "finishing touch" and for tough use, the brake lever has the option for attachment of a safety cord.Material:Lever: Stainless steel, black powder-coated End piece: Stainless steel, electropolishedNote:The Touratech stainless steel foldable brake lever is already 13mm higher in its low setting than the original brake lever.

Easy and quick to install protection. For off-road use only, away from public roads. Impact-resistant plastic with scratch-resistant coating. Additional Information