The heel guard in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice.The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

solid side carriers for mounting Hepco&Becker C-Bow side bags and cases high-quality surface finish standard Hepco&Becker hard-shell cases, such as the Junior or Journey, do not fit! Krauser K-Wing cases do not fit on the C-Bow carrier! Recommended load: 5kg per bag/case (please refer to the installation instructions, vehicle-specific notes, and motorcycle manufacturer specifications for any potential restrictions) usually combinable without issues with top case carriers, sissy bars, or solo racks (please refer to the installation instructions or vehicle-specific notes for each carrier) Luggage bridge extensions may restrict bag mounting on the carrier Luggage carriers do not require ABE or registration in the documents Scope of delivery: left + right + installation instructions + mounting kit Developed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals. Please ensure that the bags have sufficient distance from the exhaust and that the turn signals have an adequate radiation angle. The exhaust flow must not be directed at the bags.

Secure Hepco&Becker aluminum protection for the cardan shaft. Bent and welded from 3mm aluminum Made in Germany Extremely stable construction Mounting on existing screw points Includes mounting materials and instructions

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are offered. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand assembly instructions scope of delivery: right + left including mounting materials and instructions please refer to the provided assembly instructions or vehicle-specific notes for any restrictions or warnings no ABE or registration is required The engine protection bar is not suitable for the valve cover "Option 719"!

Whether riding off-road or on asphalt, the Hepco&Becker hand guard ensures reliable protection for the rider's hands and the motorcycle handlebars. powder-coated solid construction made of tubular steel, Made in Germany Scope of delivery: right + left + instructions + mounting materials usually fits only vehicles with original handlebar clamps please refer to the included installation instructions and vehicle-specific notes Fits BMW R1250GS (2018-) BMW R1200GS LC (2013-2017) BMW R1250GS Adventure (2018-) BMW R1200GS LC Adventure (2014-2017) BMW R1250GS (2018-)

Stable aluminum plate for widening on almost all luggage racks with a flat surface, when loose luggage is to be transported instead of a top case. The raised edges and additional attachment points make the extension ideal for the safe transport of larger luggage rolls, travel bags, tents, sea bags, etc. Construction made of high-strength aluminum with a premium appearance Attachment options for straps Not suitable for top case mounting Includes mounting materials and instructions High-quality plastic coating Recommended load: 5kg (Please note the model-specific information as well as the motorcycle manufacturer's specifications. Heavy luggage should generally not be transported on the rear, but in the side cases or tank bag.)

Scope of delivery: Set consisting of a model-specific stainless steel luggage rack for both sides, combined with a 40 ltr. and a cut-out 37 ltr. case including key, locking cylinder, and the necessary lock adapters to attach the cases to the rack Case Features: cut-out 37 ltr. case on the exhaust side 40 ltr. case on the other side high-impact plastic and anodized aluminum sheets in composite including key and cylinder absolutely waterproof extensive accessories available (inner bags, top cases, etc.) Scope of delivery: left + right + key + locking cylinder Recommended load: 10kg per case (Please note the model-specific instructions for each rack, as well as the motorcycle manufacturer's specifications.) Rack Features: Adventure-ready, weather-resistant, and securely bolted stainless steel luggage rack shot-blasted and electropolished surface finish Scope of delivery: left + right + mounting materials + instructions

The slim, lightweight, and discreet luggage solution from Hepco&Becker. The Minirack offers a way to securely attach soft luggage to the rear of the motorcycle. Side slots allow for a backpack or bag to be strapped down. Recommended load: 3-5kg (please pay attention to the vehicle-specific notes, the provided installation instructions, and the motorcycle manufacturer's specifications) NOT suitable for top cases no ABE or registration required high-quality powder coating solid construction made in Germany Vehicle-specific notes: Mini luggage bridge is only suitable for luggage rolls/bags. No top case mounting possible! Not compatible with Lock-it rear bag adapter.

Angeboten wird hier ein Gebrauchtteil Fahrzeug: BMW R1250GS Hersteller: Hepco&Becker Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen,ohne Montageteile, Motorrad ist im Stand umgekippt,daraufhin wurde der Bügel ausgetauscht Teilenummer: 5016514 00 22

Excellent fit - each Hepco&Becker Lock-it side case carrier is precisely tailored to the respective motorcycle type. This results in a very high accuracy of fit for the carrier on the motorcycle. Made from German steel tubing and custom-made laser parts, which are reinforced at heavily stressed points. The quality of the Lock-it carriers has been confirmed multiple times in specialist magazines in the past.The carriers can be mounted and dismounted in seconds. You only need to loosen the attached Lock-it screws with a quarter turn, and you can then remove the side parts to the rear or to the side. As theft protection, you can optionally secure the carrier with our lockable Lock-it screws against thieves (Item number: 151050).All cases are locked onto the carrier using a quick-release mechanism. For this, you need the aluminum adapters (Item number 700114), which are usually included with the case. The aluminum adapters are screwed onto the right and left of the carrier and then provide a mounting option for the case's locking mechanisms. sturdy construction MADE IN GERMANY quickly removable, only inconspicuous small tabs remain on the motorcycle high-quality surface finish generally easy installation, please refer to the provided installation instructions Scope of delivery: right + left including mounting materials and installation instructions for any restrictions, please refer to the vehicle-specific notes or the installation instructions Fits most Hepco&Becker hard-shell side cases (Please note model-specific information for each carrier.) Recommended load: 10kg in each case (Please note model-specific information for each carrier, as well as the motorcycle manufacturer's specifications.) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Asymmetrical side case carrier. Recommendation: use a narrower case on the exhaust side. e.g. 30 ltr. & 40 ltr. in combination. Turn signals remain in the original position.

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counter plate easy installation with just a few screws does not require ABE or registration Vehicle-specific notes: for lowered version

When fully loaded or on uneven surfaces, the motorcycle is at risk of sinking slightly on the side stand.A precisely machined widening plate, which can be quickly screwed onto the side stand and eliminates this danger, is now available from us!The HEPCO&BECKER Side Stand Enlarger! partly more than double the contact area secure stand of the machine on all surfaces oxidation-resistant anodized aluminum and black-coated upper steel counterplate easy installation with just a few screws does not require ABE or registration

The HEPCO&BECKER Tank Protection Bars perfectly follow the lines of the machine and give the motorcycle a unique character. In the event of a fall or unintended ground contact, they can protect the motorcycle and the rider from greater damage and provide the best possible protection. A sensible investment to avoid costly repairs in the event of an unexpected accident.The forces upon impact are optimally absorbed by the material. After a fall, a crash bar should be replaced. Weld seams and the material may have suffered invisible damage and thus provide no protection in the event of another fall. Individual parts or single sides can be easily ordered from us via email. protects tank, side panels, and front end high-quality surface finish also useful for securing the motorcycle sturdy round tube MADE IN GERMANY Scope of delivery: right + left + mounting materials engine protection bars do not need to be registered and do not require ABE please refer to the attached installation instructions, as well as the model-specific notes for any potential restrictions

Angeboten wird hier ein Gebrauchtteil Fahrzeug: BMW R1250GS Hersteller: Hepco&Becker Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen,ohne Montageteile, Motorrad ist im Stand umgekippt,daraufhin wurde der Bügel ausgetauscht Teilenummer: 5026514 00 22

The tail bag in classic Ibarra design!Specifically designed for mounting on the luggage racks of adventure bikes such as the BMW GS models or the KTM Adventure series, the Ibarra tail bag also fits on the luggage racks of most current adventure bikes. It is super easy to install and provides easily accessible additional storage space. The passenger is not restricted in any way, and the position of the bag far back on the vehicle does not unnecessarily complicate mounting for the rider.Non-slip, precisely fitting base plate for a play-free and stable hold on the vehicleHigh-quality Cordura®Washable and easy to cleanReflective inserts for increased safetyWaterproof, high-quality zippersElastic, reflective drawstring with quick-release for easy attachment of gloves or rain jacketLarge main compartment without dividers for maximum space and individual loadingRain cover available as an optionPlease use a paint protection film if necessary! Dimensions: (L x W x H) approx. 24 x 29 x 17 cmVolume: approx. 9 liters

Once you have experienced the advantages of inner bags for luggage, you will not want to do without this useful accessory!The high-quality, custom-fit inner bags made from durable Cordura fabric make packing before the ride incredibly easy. You can finally be sure that everything you conveniently pack into the inner bags through the large zipper lid can actually be stored in the luggage case.Models up to 2012 on the right side, models from 2013 on the left side- For all model years!During the journey, the dirty and heavy luggage cases and the top case can remain on the vehicle, and all the luggage can be comfortably carried to the tent or room in the luggage inner bags thanks to two carrying handles. The empty cases on the vehicle now provide enough space for rider clothing and equipment that is not needed at the accommodation.The "large" inner bag fits perfectly into the BMW Variotopcase of all GS models and into the larger of the two Variokoffer, and the all-around zipper with expansion pleat also allows for easy volume adjustment of the cases.Dimensions of the "large" inner bag: (L x W x H): approx. 38 x 22/28 x 27 cmVolume: approx. 22/29 litersColor: black

Once you have experienced the advantages of inner bags for luggage, you will not want to do without this useful accessory!The high-quality, custom-fit inner bags made from durable Cordura fabric make packing before the ride incredibly easy. Finally, you can be sure that everything you conveniently pack into the inner bags through the large zipper lid can actually be stored in the luggage case.Models up to 2012 on the left side, models from 2013 on the right side- for all model years!During the journey, the dirty and heavy luggage cases and the top case can remain on the vehicle, and all the luggage can be comfortably carried to the tent or room in the luggage inner bags thanks to two carrying handles. The empty cases on the vehicle now provide enough space for rider clothing and equipment that is not needed at the accommodation.The "small" inner bag also has the option to adjust the volume to fit the luggage case and leaves enough space above the cutout of the end silencer to accommodate a first aid kit, oil, or a small fuel bottle with the help of a power Velcro.Dimensions of the "small" inner bag: (L x W x H): approx. 38 x 14/18 x 27 cmVolume: approx. 15/18 litersColor: black

These installation locks are specifically designed for Touratech side bags with ZEGA docking panel.If you require a specific key number, please enter it during the ordering process.Delivery includes:- 2x lock- 4x keys

JMP Fork Reflector Oval   Color: yellow Curved back for mounting on the fork tube with self-adhesive film   Dimensions: 99x27 mm   E-approved            Technical Data:Shape:   oval Color:   yellow Mounting:   self-adhesive Height:   96 mmWidth:   24 mmSpecial Feature:   curved for example for fork tube

Der Touratech Kofferdeckel-Schutzbelag ist viel mehr als ein gewöhnlicher Kofferdeckelaufkleber! Wozu braucht man das? Weil die Beanspruchungen im realen Reise-Alltag eben höher sind.Durch die spezielle "Raindrop" Oberfläche sorgt der passgenau zugeschnittene Belag für optimale Griffigkeit und Rutschschutz. Er verbessert den sicheren Halt Ihres Gepäcks auf dem Deckel und entlastet damit die Verzurrungen.Die Kofferschutzabdeckung widersteht selbst härtesten Beanspruchungen, z.B. wenn der Koffer als Motorrad-Montageständer genutzt wird.Das zwei Millimeter starke Gummipolster aus Polyuretan ist nicht nur extrem widerstandsfähig, es lässt auch Kratzer und selbst tiefe Riefen im Kofferdeckel einfach verschwinden. Ein Vollsaugen der Schutzfolie mit Wasser ist dennoch ausgeschlossen.Der Touratech Kofferdeckel-Schutzbelag ist jeweils für alle ZEGA Evo Koffergrößen verfügbar. Einfach in der Auswahl die passende Größe wählen (31l, 38l oder 45l).Tipp: Der Polyurethan-Antirutschbelag hilft sogar gegen einen kalten Hintern, wenn der Koffer als Sitz genutzt wird!Die selbstklebende Antirutschmatte lässt sich im Handumdrehen schnell und einfach auf dem Kofferdeckel aufbringen.- hohe Rutschhemmung- hohe Verschleißfestigkeit- schlagzäh- langlebig- passgenau zugeschnitten (je 2mm Abstand zu Kofferdeckel-ecken und -kanten)Stärke: 2 mmFarbe: schwarzMaterial: PolyurethanQualität:Dekra geprüfte Qualität nach VDI 2700, Blatt 14 Rutschhemmung geprüft nach DIN 51130Reibbeiwert µ = > 0,80

Kühlerlüfter Lüfter für Wasserkühler für R1200GS LC R1250GS + AdventureAngeboten wird hier ein GebrauchtteilFahrzeug: R1200GS LC, R1250GS, R1200GS LC Adventure, R1250GS Adv.Hersteller: BMWZustand: Gebraucht, Funktion getestetBeschreibung: wird verkauft wie abgebildetTeilenummer: 17428523118

n.v.

Unser Hepco&Becker Lampenschutzgitter schützt den Scheinwerfer in vielen Fällen und verleiht Ihrem Bike auch den standesgemäßen Offroad-Look.dem Design des Motorrads angepasstwirkungsvoller Schutzkeine Reflektionen oder Gefahr durch Eigenblendungeinfacher Anbau an meist vorhandenen Schraubpunktensolide Konstruktion aus deutschem Stahlrobuste und hochwertige Beschichtungin Deutschland ohne TÜV

Modellspezifische LenkererhöhungMehr Fahrkomfort durch eine veränderte Sitzposition: Diese speziell auf das Fahrzeug angepassten Lenkererhöhungen aus robustem, CNC-gefrästem Aluminium erhöhen den Lenker um 40 mm. Eine Verlängerung der Bowdenzüge und Bremsleitungen ist nicht erforderlich.Erhöhung des Ø 32 mm-Lenkers um 40 mmModellspezifische Auslegung garantiert beste PassformKorrosionsschutz durch schwarze PulverbeschichtungAus hochfester Aluminium-Legierung CNC-gefrästMehr Fahrkomfort durch eine Verbesserung der SitzpositionLieferumfang2 x Modellspezifische LenkererhöhungMontagematerialDetailsMaterial: AluminiumOberfläche: pulverbeschichtetFarbe: schwarzGesamtgewicht: ca. 0,6 kgGenehmigungshinweisDas mit dem Produkt ausgelieferte ABE-Gutachtenheft muss bei der Fahrt immer mitgeführt werden. Diese ABE gilt nur für die gelisteten Modelle und unter Beachtung der Informationen in der Anbauanleitung. Eine Eintragung in die Fahrzeugpapiere ist bei Mitführung des Dokumentes nicht notwendig. Der Verwendungsbereich im ABE-Dokument wird jährlich erweitert. Die aktuelle Version des ABE-Gutachtens steht im Download-Bereich unseres Webshops zur Verfügung. Bitte beachten Sie, dass eine Abklärung zur Freigabe des Produktes für die Motorradfahrzeugkontrolle außerhalb Deutschlands vor dem Erwerb zu klären ist. Technische Artikel, die für eine Eintragung im jeweiligen Land abgelehnt wird, können leider nicht mehr retourniert werden. Für das Ausstellen einer notwendigen ausländischen Zertifizierung können Kosten entstehen.