Engine protection & engine accessories

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

The Mahle oil filter delivers first-class filtration technology for your engine. As a renowned German manufacturer, Mahle guarantees the highest quality standards and durability. This oil filter effectively removes contaminants, metal particles, and residues from engine oil, protecting your engine from wear. The robust construction and optimized filter medium ensure reliable performance under all operating conditions. Regular oil filter changes with this premium product demonstrably extend your engine's lifespan and ensure optimal performance.

Original Sturzbügel Schutzbügel seidenmatt schwarz beschichtet links für BMW R1250 RT GS R RS Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1250GS, R1250R, R1250RS Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet , starke Kratzer Teilenummer: 77145A5A561

RockerCover Cover Right in Carbon - BMW R 1250 GS. R 1250 R and R 1250 RS from 2019 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon engine guard for the BMW R 1250 GS is an advanced high-tech motorcycle component specifically engineered to protect the engine and underside of the motorcycle from damage caused by stone impacts, dirt accumulation, and other environmental hazards. This premium protective component is optimized for all BMW R 1250 GS motorcycles from 2019 onwards and delivers both functional protection and technical performance benefits. The lower carbon engine guard has been specifically designed to safeguard the sensitive engine and underlying components from damage caused by stone chips and gravel ejection, which are particularly prevalent during off-road riding or on rural roads. Beyond protection, this carbon engine guard also provides an optimized weight reduction of approximately 70 percent compared to the original factory part, which substantially improves overall motorcycle performance characteristics. This remarkable weight reduction contributes to faster acceleration, enhanced braking performance, and optimized cornering behavior. The reduced weight is noticeable during every ride and results in more agile overall motorcycle handling. The carbon engine guard completely replaces the original component and is installed using the original factory mounting points. This ensures that no motorcycle modifications are required and installation can be completed quickly and straightforwardly. Compatibility is fully assured since the component has been specifically engineered for the BMW R 1250 GS. The material used for this carbon engine guard is premium-grade prepreg carbon, carefully selected to meet the demanding requirements of the motorcycle industry. Prepreg carbon offers an excellent combination of minimal weight and maximum strength characteristics. The material is processed in an autoclave according to modern industrial standards, ensuring consistent quality in every single component manufactured. Autoclave processing enables optimal fiber alignment, resulting in ideal strength distribution that maximizes the structural integrity of the engine guard. This advanced manufacturing technique guarantees that the engine guard provides superior protective performance against damage while remaining minimal in weight. The increased rigidity of the carbon engine guard contributes to improved overall structural stiffness of the motorcycle, which positively impacts handling stability, precision, and vehicle control. A stiffer chassis results in more precise steering characteristics and better ground grip, which is especially noticeable during demanding riding situations. The carbon structure of the engine guard enhances the three-dimensional visual effect and creates visual depth that makes the motorcycle appear more sporty and premium. The characteristic carbon fiber pattern becomes visible and creates a contemporary, aggressive aesthetic. Functionality and design perfectly unite in this component. The superior protective performance of the carbon engine guard combines with the contemporary carbon structure to create not only a visual upgrade but also measurable protection against environmental hazards and mechanical damage. The surface characteristics have been developed to remain resistant to scratches, scuff marks, and other wear phenomena over extended periods. The engine guard offers superior scratch resistance and durability against everyday stresses that occur during regular motorcycle use. The carbon surface is sealed to provide protection against UV radiation, moisture, and chemical substances. This guarantees extended service life and consistent visual appearance across many years of use. Experience the perfect combination of functionality and stylish design for your BMW R 1250 GS with this carbon engine guard. Choosing an Ilmberger carbon component means selecting a product created through a demanding manufacturing process requiring the highest precision standards. Ilmberger places great emphasis on ensuring that every single carbon component is created with passion and technical expertise. Extensive experience combined with innovative manufacturing techniques and skilled craftsmanship form the foundation for premium quality. Every Ilmberger carbon component embodies innovation and technical sophistication, which is directly reflected in product quality and longevity. Selecting this carbon engine guard represents choosing comprehensive engine protection, weight reduction, and visual premium style. Upgrade your BMW R 1250 GS with this carbon engine guard and benefit from optimized protection, reduced weight, improved stability, and breathtaking carbon aesthetics. Transform both the functionality and aesthetic appearance of your motorcycle. Order now and invest in a premium component that improves your motorcycle on every level.

No matter how the GS falls, the Touratech engine crash bar is there where it is needed. The most comprehensive all-around protection ever available for boxer engines!A "cage" made of 25mm thick, 2mm stainless steel pipes completely encloses the cylinders. Forces that occur are safely redirected and gently dissipated through effective distribution. Numerous mounting points and the predetermined bending points ensure not only safe protection for the cylinders but also for the frame and engine of your R1250GS.Despite the impressive pipe diameters, the crash bar is mounted as close as possible to and symmetrically to the vehicle axis. It has virtually no impact on lean angle or ground clearance.It integrates perfectly into the look of the R1250GS, completing the overall appearance; it simply belongs!Made exclusively from robust electropolished stainless steel, the crash bar is resistant to rust. Even deeper scratches lose their menace and can be easily sanded down.The mounting points are perfectly tailored to the R1250GS! Complete mounting materials are, of course, included in the delivery.In short:- complete protection of the cylinders, also to the rear and above- safe dissipation of occurring forces without damaging the frame and engine- no restrictions on lean angle or ground clearance- made from 25/2 mm stainless steel pipes- Made in GermanyFor combination with the Touratech cylinder protection 01-037-5130-0, 01-037-5131-0, and 01-037-5132-0, we recommend using 01-037-5169-0.Also fits with BMW "Option 719". Only the oil cap cannot be removed.

No matter how the GS falls, the Touratech engine crash bar is there where it is needed. The most comprehensive all-round protection ever available for boxer engines!A "cage" made of 25mm thick, 2mm stainless steel pipes completely encloses the cylinders. Forces that occur are safely redirected and gently dissipated through effective distribution. Numerous mounting points and predetermined bending points ensure not only protection for the cylinders but also for the frame and engine of your R1250GS.Despite the impressive pipe diameters, the crash bar is mounted as close as possible to and symmetrically to the vehicle axis. It has virtually no impact on lean angle or ground clearance.It integrates perfectly into the look of the R1250GS, completing the overall appearance; it simply belongs!Made exclusively from robust stainless steel, the crash bar is resistant to rust. Even deeper scratches lose their menace and can be easily sanded down.The mounting points are perfectly tailored to the R1250GS! Complete mounting materials are, of course, included in the delivery.In short:- complete protection of the cylinders, including rear and top- safe dissipation of occurring forces without damaging the frame and engine- no restrictions on lean angle or ground clearance- made from 25/2 mm stainless steel pipes- Made in GermanyFor combination with the Touratech cylinder protection 01-037-5130-0, 01-037-5131-0, and 01-037-5132-0, we recommend using 01-037-5169-0.Also fits with BMW "Option 719". Only the oil cap cannot be removed.

Complete the sporty adventure look of your Boxer and effectively protect the exposed cylinders!Whether it's a bump while maneuvering in a tight garage, stone chips on the highway, or a tip-over after a strenuous stage - the cylinders of the BMW Boxer can get scratched quickly. In the worst case, the valve cover can even get a hole, and the journey is abruptly over.The complex design of the Shiftcam mechanism in the R1250 series requires special protection. Our developers have specifically designed this cylinder protection for that purpose.The unique shape of the 4 mm thick aluminum part guarantees effective protection, high stability, and gives your BMW a sporty-modern look. The aluminum part surrounds your cylinders like a protective shell.Thanks to the thoughtful design, forces are kept away from the valve cover in the event of a fall. A hit with expensive consequences turns into a slide with a small scratch on the protector.Sold as a set for both sides.For combination with the Touratech crash bars 01-037-5160-0 and 01-037-5162-0, we recommend using 01-037-5169-0.For combination with the original BMW engine protection bars (R 1250 GS Adventure), please remove its rubber element.Not suitable in conjunction with "Option 917" covers.

Complete the sporty adventure look of your Boxer and effectively protect the exposed cylinders!Whether it's a bump while maneuvering in a tight garage, stone chips on the highway, or a tip-over after a strenuous stage - the cylinders of the BMW Boxer can get scratched quickly. In the worst case, the valve cover can even get a hole, and the journey is abruptly over.The intricate design of the Shiftcam mechanism in the R1250 series requires special protection. Our developers have specifically designed this cylinder protection for that purpose.The unique shape of the 4 mm thick aluminum part guarantees effective protection, high stability, and gives your BMW a sporty-modern look. The aluminum part surrounds your cylinders like a protective shell.Thanks to the thoughtful design, forces are kept away from the valve cover in the event of a fall. A hit with expensive consequences turns into a slide with a small scratch on the protector.Sold as a set for both sides.For combination with the Touratech crash bars 01-037-5160-0 and 01-037-5162-0, we recommend using 01-037-5169-0.For combination with the original BMW engine protection bars (R 1250 GS Adventure), please remove its rubber element. Not suitable in conjunction with "Option 917" covers.

Complete the sporty adventure look of your Boxer and effectively protect the exposed cylinders!Whether it's a bump while maneuvering in a tight garage, stone chips on the highway, or a tip-over after a strenuous stage - the cylinders of the BMW Boxer can get scratched quickly. In the worst case, the valve cover can even get a hole, abruptly ending your journey.The intricate design of the Shiftcam mechanism in the R1250 series requires special protection. Our developers have specifically designed this cylinder protection for that purpose.The unique shape of the super-robust stainless steel part guarantees effective protection, high stability, and gives your BMW a sporty-modern look. The stainless steel part surrounds your cylinders like a protective shell.Thanks to the thoughtful design, forces are kept away from the valve cover in the event of a fall. A hit with expensive consequences turns into a slide with a small scratch on the protector.Sold as a set for both sides.For combination with the Touratech crash bars 01-037-5160-0 and 01-037-5162-0, we recommend using 01-037-5169-0.For combination with the original BMW engine protection bars (R 1250 GS Adventure), please remove its rubber element. Not suitable in conjunction with "Option 917" covers.

The symbiosis of the latest manufacturing techniques and individual design!The RALLYE engine guard is designed as a complete protection from the headers to the catalytic converter of your R1250GS. It fits all R1250GS and Adventure models. In the development, we also focused on compatibility with original BMW and Touratech crash bars. Thanks to innovative manufacturing technology, it comes without disruptive weld seams, which are often perceived as weak points.The unique shape of the 4 mm thick aluminum part guarantees effective protection, high stability, and gives your GS a sporty-modern look. Like a protective shell, the RALLYE engine guard surrounds your headers to protect them as best as possible from all sides. It hugs the body of your BMW, ensuring maximum ground clearance. The organically rounded shapes effectively dissipate energy upon impact. It also prevents jamming or snagging. Direct impacts are compensated by the additional stainless steel plate inside. Since the RALLYE engine guard extends behind the main stand of your GS, even the catalytic converter is effectively protected. Details such as chamfered edges protect the screw heads in tough off-road use.By using internal hex screws, the installation/removal of the engine guard during the maintenance of your GS is child's play.

The symbiosis of the latest manufacturing techniques and individual design!The RALLYE engine guard is designed as complete protection from the headers to the catalytic converter of your R1250GS. It fits all R1250GS and Adventure models! In the development, we also focused on compatibility with original BMW and Touratech crash bars. Thanks to innovative manufacturing technology, it comes without disruptive weld seams, which are often perceived as weak points.The unique shaping of the 4 mm thick aluminum part guarantees effective protection, high stability, and gives your GS a sporty-modern look. Like a protective shell, the RALLYE engine guard surrounds your headers to protect them as best as possible from all sides. It hugs the body of your BMW, ensuring maximum ground clearance. The organically rounded shapes effectively dissipate energy upon impact. It also prevents jamming or snagging. Direct impacts are compensated by the additional stainless steel plate inside. Since the RALLYE engine guard extends behind the main stand of your GS, even the catalytic converter is effectively protected. Details such as chamfered edges protect the screw heads in tough off-road use.By using internal hex screws, the installation/removal of the engine guard during the maintenance of your GS is child's play.

Necessary for simultaneous installation of:Touratech crash bars (01-037-5160-0 / 01-037-5162-0) and the stainless steel valve cover protection (01-037-5130-0) or aluminum (01-037-5131-0 / 01-037-5132-0).

Brilliant and elegant - beautiful protection against foreign substances in the oil circuit of your R1250/R1200.Made of aluminum, CNC-machined, anodized, and with an integrated hexagon for opening.The plug is simply installed in place of the original plastic part and can then only be opened with a TORX50 key. This makes easy disassembly more difficult, yet quick maintenance remains no problem. (Torx bit is not included)

With the Touratech reinforcement strut, the BMW engine protection bar of the R1250GS becomes a fully-fledged crash bar! Because only the additional support point ensures maximum safety.Thanks to its electropolished surface and the use of the same diameters, it fits both technically and visually perfectly with the BMW engine protection bar of the GS.The reinforcement strut made of robust 25mm stainless steel pipe is incredibly easy to install. This is made possible by a novel connection technology.With little effort, the Touratech reinforcement strut provides a lot of added value!Set for both sides!Not suitable for cylinder head cover "Option 719".

Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1250 GS + Adventure Hersteller: BMW Zustand: kaum Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, 1 Hülse fehlt BMW Teilenummer: 11848485696

The stainless steel cylinder head cover protector offers comprehensive protection for the cylinder head cover against scratches and stone impacts. It has been perfectly tailored to the vehicle, is equipped with a large rubber buffer, and optimally emphasizes the design and lines of the boxer engine. Product Details Engine protection against scratches and stone impacts With BMW wordmark Rustic appearance

Zündspulenabdeckung Kerzenschachtabdeckung links für BMW R1250 RT GS R RS Angeboten wird hier ein Gebrauchtteil Fahrzeug: R1250RT, R1250GS, R1250GS Adventure, R1250R, R1250RS Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet , Kratzer Teilenummer: 11128394385