Windshields & Crash Bars

The frame protector made of black plastic effectively protects the frame from scratches and prevents wear spots caused by motorcycle boots. Frame protector made of polyamide Protects the frame from scratches Especially during heavy boot use off-road Color: black (textured) Fits the following vehicles: - R1200GS LC - R1200GS LC Adventure - R1250GS - R1250GS Adventure

Angeboten wird hier ein Gebrauchtteil Fahrzeug: BMW R1250GS Hersteller: Hepco&Becker Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen,ohne Montageteile, Motorrad ist im Stand umgekippt,daraufhin wurde der Bügel ausgetauscht Teilenummer: 5016514 00 22

Angeboten wird hier ein Gebrauchtteil Fahrzeug: BMW R1250GS Hersteller: Hepco&Becker Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen,ohne Montageteile, Motorrad ist im Stand umgekippt,daraufhin wurde der Bügel ausgetauscht Teilenummer: 5026514 00 22

The black high-gloss coated engine protection bars made of stainless steel reduce the risk of damage to the motorcycle. The bars do not restrict lean angle freedom and thus do not compromise riding pleasure. A visually matching addition: other components in black such as the luggage system, the luggage bridge, or the Enduro aluminum engine protection. Product Details Robust protection off-road and on the road No restriction of lean angle freedom Durable high-gloss coating in black Weight: approx. 1.8 kg This kit consists of the following parts: The bars fit the following vehicles:

The robust engine protection bars made of polished stainless steel reliably protect the cylinder area from damage without restricting lean angle freedom. The stable tubular construction can withstand even severe impacts and can prevent significant crash damage both off-road and on asphalt. Product Details Robust protection off-road and on asphalt Two-part stainless steel bar No restriction of lean angle freedom Weight approx. 1.8 kg This kit consists of the following parts: The bars fit the following vehicles:

The original BMW windshield in clear is offered for K50 R1200GS LC and R1250GS. Part number: 46638404850

Perfect protection and value retention for your GS! Our side covers fill two unsightly gaps in the rear area of the R1200GS and are not only visually appealing and perfectly shaped, but also practical!Experience over many years has shown that protecting the painted frame tubes in the boot area is absolutely necessary.Side Covers:The covers made from a mix of plastic and stainless steel are easy to install and protect the sensitive mechanics of the spring travel sensor just as perfectly as all components of the Dynamic ESA and the rear shock absorber.Not every GS rider appreciates the unobstructed view of hard-to-clean components in the rear area of the chassis, which is why our side covers not only protect against splash water on the road and kicked-up dirt during off-road rides, but also feature a smooth, easy-to-clean surface where dirt cannot settle!The visually two-part side cover is connected by an anodized, high-quality laser-engraved stainless steel part to form a perfect and easily removable unit. This also reduces the risk of getting caught with your boot on the vehicle frame, preventing any equipment from unintentionally snagging on the vehicle.Frame Protection:Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use can quickly make the frame unsightly as the paint wears off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Scope of delivery:- Side covers, left and right (with socket preparation) - Small frame protection, left and right- Mounting materialsColor: black

No matter how the GS falls, the Touratech engine crash bar is there where it is needed. The most comprehensive all-round protection ever available for boxer engines!A "cage" made of 25mm thick, 2mm stainless steel pipes completely encloses the cylinders. Forces that occur are safely redirected and gently dissipated through effective distribution. Numerous mounting points and predetermined bending points ensure not only protection for the cylinders but also for the frame and engine of your R1250GS.Despite the impressive pipe diameters, the crash bar is mounted as close as possible to and symmetrically to the vehicle axis. It has virtually no impact on lean angle or ground clearance.It integrates perfectly into the look of the R1250GS, completing the overall appearance; it simply belongs!Made exclusively from robust stainless steel, the crash bar is resistant to rust. Even deeper scratches lose their menace and can be easily sanded down.The mounting points are perfectly tailored to the R1250GS! Complete mounting materials are, of course, included in the delivery.In short:- complete protection of the cylinders, including rear and top- safe dissipation of occurring forces without damaging the frame and engine- no restrictions on lean angle or ground clearance- made from 25/2 mm stainless steel pipes- Made in GermanyFor combination with the Touratech cylinder protection 01-037-5130-0, 01-037-5131-0, and 01-037-5132-0, we recommend using 01-037-5169-0.Also fits with BMW "Option 719". Only the oil cap cannot be removed.

Necessary for simultaneous installation of:Touratech crash bars (01-037-5160-0 / 01-037-5162-0) and the stainless steel valve cover protection (01-037-5130-0) or aluminum (01-037-5131-0 / 01-037-5132-0).

A small tip-over or fall, which often occurs while traveling, can damage the tank and fairing parts. The Touratech fairing crash bar protects the sensitive radiator, the fairing, and even the tank of the new boxer! In the event of a tip-over, the vehicle rests on the crash bar, preventing expensive plastic parts from being scratched or broken. Even heavy impacts can be absorbed by the crash bar.The electropolished stainless steel is not only functional but also a real eye-catcher.Suitable for combination with original BMW engine crash bars.With the Touratech adapter kit (045-5200), you can mount the original BMW LED auxiliary headlights directly onto the Touratech crash bar extension of the R1250GS.

Maximum protection for every demand!Even our small frame protector (045-5037) impresses with its effectiveness. However, those who desire more protective coverage for the entire vulnerable footpeg/frame area should opt for this larger version to prevent paint wear and frame damage.This product features a precisely fitting plastic cover that convincingly protects three main frame tubes, the swingarm bearing area, and the front fastening of the Paralever strut from wear and dirt damage.All of this with the simplest installation and perfect, play-free execution! -tough and capable of withstanding any load-lightweight and temperature-stable-incredibly easy to install-perfectly protects against damage to the lattice frameColor: black

Maximum protection for every demand!Even our small frame protector (045-5038) impresses with its effectiveness. However, those who desire more protective coverage for the entire vulnerable footpeg/frame area should opt for this larger version to prevent paint wear and frame damage.Here, a precisely fitting plastic cover convincingly protects three main frame tubes, the swingarm bearing area, and the front fastening of the Paralever strut from damage due to abrasion and dirt.All of this with the simplest installation and perfect, play-free execution! - tough and capable of withstanding any load- lightweight and temperature stable- incredibly easy to install- perfectly protects against damage to the lattice frameColor: black

Protects the valve control from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.

Protects the flap control from damage and is also a visual treat. The robust, laser-cut aluminum guard can be easily mounted in just a few moments.

With the Touratech reinforcement strut, the BMW engine protection bar of the R1250GS becomes a fully-fledged crash bar! Because only the additional support point ensures maximum safety.Thanks to its electropolished surface and the use of the same diameters, it fits both technically and visually perfectly with the BMW engine protection bar of the GS.The reinforcement strut made of robust 25mm stainless steel pipe is incredibly easy to install. This is made possible by a novel connection technology.With little effort, the Touratech reinforcement strut provides a lot of added value!Set for both sides!Not suitable for cylinder head cover "Option 719".

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Not suitable for lowered suspension.Not suitable for special model R1200GS "Rallye" with special equipment "Sport Suspension". Please use 01-045-5276-0 for that.Attention: Regardless of the model year, different side stands have been installed, so we recommend checking the shape of your side stand as well.Please use for: - Wide shape 01-045-5276-0- Narrow shape 1021-01-045-5275-0

Without a functioning side stand switch, your ride with the GS-Adventure is immediately over, as the ignition is interrupted.With the Touratech side stand switch protection, this extremely important component is perfectly protected from damage. Neither the tip of your boots nor branches or stones can harm it.Made from 1.5 mm thick stainless steel and supplied with all the necessary parts for installation, this nearly indestructible protection can be easily and quickly mounted.An absolute safety plus, both on and off-road!

Perfect protection and value retention for the GS frame! Experience over many years has unfortunately shown that protection for the painted frame tubes in the boot area is actually essential.Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use will make the frame unsightly in no time as the paint gets worn off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Color: black

Perfect protection and value retention for the GS frame! Experience over many years has unfortunately shown that protection for the painted frame tubes in the boot area is actually essential.Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use will make the frame unsightly in a very short time as the paint gets worn off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide a stunning effect with minimal effort!Color: black

The black anodized splash guard is mounted behind the license plate holder and extends it downwards and backwards. It effectively prevents kicked-up dirt from soiling or even damaging the seat, clothing, or luggage. The aluminum splash guard additionally stabilizes the license plate and prevents it from vibrating loose. Material: black anodized aluminum

Whether for your original windscreen or as an addition to your new Touratech windscreen - the Touratech Windscreen Spoiler Evo is an absolute comfort enhancement for any terrain.The Evo offers the right balance between protection and airflow - whether on the highway, country road, or off-road. It is incredibly easy to adjust in height, angle, and distance from the screen - no tools are required.On fast and rainy stages, you can set the spoiler to the highest level to enjoy effective wind and weather protection. Your head and upper body will feel noticeably relieved, and wind noise in the helmet will be significantly reduced.In the lowest setting, the windscreen spoiler is almost invisible. This allows for maximum airflow during off-road rides.The "bent" 3D shape not only visually adapts to the design of modern motorcycle screens, but it also provides optimal airflow, resulting in significantly less turbulence. An additional airflow is created between the spoiler and the screen, effectively minimizing the turbulence generated at the edge of the screen.Thanks to the side-mounted brackets, there is no obstruction of the central field of vision. Additionally, unwanted turbulence is prevented. The spoiler is incredibly easy to install and is compatible with almost all windscreens, and can be removed without a trace if needed.With ABE (for the original screens of various manufacturers).Width of the screen: 26 cmHeight of the screen: 10 cm

Schon ein kleiner Umfaller oder Sturz, wie er auf Reisen häufig vorkommt, und Tank und Verkleidungsteile sind beschädigt. Der Touratech Verkleidungssturzbügel schützt den empfindlichen Kühler, die Verkleidung und selbst den Tank des neuen Boxers! Bei einem Umfaller bleibt das Fahrzeug auf dem Sturzbügel liegen und somit werden teure Kunststoffteile nicht zerkratzt oder zerbrochen. Selbst derbe Schläge kann der Sturzbügel wegstecken. Der schwarze Edelstahl ist nicht nur funktionell, sondern auch ein echter Hingucker. Geeignet zur Kombination mit original BMW Motorschutzbügel. Mit dem Touratech Adaptersatz (045-5200) können Sie die originalen BMW LED Zusatzscheinwerfer direkt an der Touratech Sturzbügelerweiterung der R1250GS/ R1200GS (2017-) montieren.

Beseitigt die Probleme der Original-Verkleidungsscheibe durch die jetzt individuell definierbare Abrisskante. Turbulenzen und hierdurch entstehende Geräuschentwicklungen werden deutlich verringert. Die Fakten: Individuell (Neigung, Höhe und Nähe zum Fahrer) einstellbarer Spoileraufsatz. Optimale Entlastung für Helm und Oberkörper. Beseitigt Turbulenzen und falsche Anströmung der Original-Scheibe. Leichte Verstellung. Schnell an- und abbaubar. Sicherer Halt. Gewichtsoptimierter, gefräster Halte-Mechanismus. Eloxiertes, hochfestes Aluminium. Bruchsichere PMMA Acryl-Kunststoff-Scheibe. Ebenfalls passend für zahlreiche Modelle der Marken: Aprilia, Ducati, Honda, Kawasaki, Piaggio, Suzuki, Triumph, Yamaha...Vario-ERGO 3D+ (Breite: 245 mm, Höhe: 105 mm) Rauchgrau mit Halter in Titanfarbe Angeboten wird hier ein GebrauchtteilHersteller: WunderlichZustand: Kaum GebrauchsspurenBeschreibung: Weinig genutzt. 1 kleiner Kratzer. Wird verkauft wie abgebildet.