Protection against theft of the closure cap. Protection against unauthorized access and contamination of the oil. BMW Boxer lettering. Includes special angle wrench and O-ring. Additional Information

Satz Dichtringe Gabel Gabelsimmerringe für BMW R1200GS LC +Adv., R1250GS + Adventure, R1200RT LC, R1250RTAngeboten wird hier ein NeuteilFahrzeug: R1200GS LC + Adv., R1250GS + Adv., R1200RT LC, R1250RT Hersteller: BMW Zustand: NEU Beschreibung: Wird verkauft wie abgebildet. Besteht aus 2 Staubkappen, 2 Gabelsimmerringen, 2 Sicherungsringen (Sprengringe) und 2 Unterlegscheiben.Neupreis: 51,57 € Teilenummer: 31428532723

Angeboten wird hier ein Neuteil Fahrzeug: K50 R1200GS ab 2017 R1250GS / K51 R1250GS Adventure / K52 R1200RT LC R1250RT Hersteller: BMW Zustand: Neu Beschreibung: wird verkauft wie abgebildet Teilenummer:31428548943

For the installation of a Touratech windscreen on your GS model year 2013.

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlarger, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlarger a great look and full stability. With a secure attachment of the foot enlarger, it is always with you, saving you a lot of trouble and frustration thanks to this practical accessory.Fits only with original BMW side stands for lowered chassis.

A well-known problem that has cost most motorcyclists their last nerves! You ride your machine off the road over stock and stone, a short break is included. But easier said than done. Parking the vehicle on soft ground is a real problem! A small board or a similar base is usually never at hand when needed.Touratech has the solution: With the side stand foot enlargement, the contact area is increased by more than double, and the exhausting task of lifting the fully loaded bike is now a thing of the past. A mix of stainless steel and black anodized aluminum gives this enlargement a great look and full stability. With a secure attachment of the foot enlargement, it is always with you, saving you a lot of trouble and frustration with this practical accessory.Not suitable for lowered chassis.Suitable for special model R1200GS "Rallye" with special equipment "Sport chassis".Attention: Regardless of the respective model year, different side stands have been installed, so we recommend additionally checking the shape of your side stand.Please use for: - Wide shape 1021-01-045-5276-0- Narrow shape 01-045-5275-0

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For this thermic stressed part we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Easy to install + lightweight + high protection effectWe have taken on these challenges and developed a cylinder protection that meets all these criteria!Made from 3mm thick aluminum and attached at the designated points, the Touratech cylinder protection for the water-cooled R1200GS withstands "tip-overs" as well as stronger "impacts." Scratched valve covers or even holes in them are a thing of the past.Tested, among other places, in Madagascar, the protection has reliably proven its performance.A "must-have" for every boxer engine with its protruding cylinders!- can be mounted together with original BMW engine protection bars- made of 3mm thick silver anodized aluminum- easy and quick to installDelivery includes:Cylinder protection right + left, mounting materials, installation instructionsTo combine with Touratech crash bars, please order 045-5130!

JMP Skan Monitor 2 Lithium Battery monitoring with your smartphone: With the JMP Skan Monitor 2 and the new free Apple or Android app "JMP BatteryMonitor II", you can quickly and easily check the charge status of your battery. Only with a consistent, positive charge status of the battery is the full capacity and usability guaranteed. The positive charge status also prevents potential early damage or failure of the battery. Continuous recording captures the battery's charge status during rides and can be accessed later. The file with the data can be sent via email from the smartphone and displayed in Excel. This allows you to quickly identify where the charging voltage dropped or was too high. Additionally, a defective regulator can be quickly identified. Furthermore, the new app can also accurately check starting processes (starter, cable connections, etc.) and charging processes (alternator, cables, etc.). This saves long troubleshooting in case of problems. In case of low battery status or other issues, a notification can warn the rider depending on the settings in the app options. After a simple connection using eyelets to the battery and downloading the new Android or Apple app, the current voltage value can be retrieved. Please note: The transmitter is suitable for 12 V batteries and is only suitable for lithium batteries! The new JMP Skan Monitor 2 requires the new free app "JMP BatteryMonitor II"! Please download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. The connection is made via Bluetooth. (Only from Bluetooth 4.0; e.g., from iPhone 4s, iPad3, or iPod Touch 5). The range is approximately 10 meters. Features: The JMP Skan Monitor 2 is excellent for detecting overvoltage > 14.9 V from the alternator before damage to the battery occurs. If the minimum voltage is not met, a reminder for soon recharging the battery is given. Easy attachment using eyelets to the battery. Power consumption is only about 2 mA. No damage occurs to the transmitter or battery in case of reverse polarity. Download the free app from the Apple App Store or Google Play Store under JMP Battery Monitor II. Voltage recording even during rides, results can be sent via email (file display in Excel possible).

8-piece tire repair kit for tubeless tires with tire repair sealing strips, tools, and the new Plug Bond from Slime- for motorcycles, quads, ATVs, cars, SUVs, lawnmowers, trailers, agriculture, and many more- tire repair kit with the new, non-toxic, safe, and patented Plug Bond from Slime- for quick and easy repair of flat tires without having to remove the wheel!- suitable only for emergencies and short-term repairs on motorcycles and cars: Have the tire repaired by a professional immediately after use for safety reasons!- contents: reamer, insertion tool with T-handle, 5x vulcanizing sealing strips, Plug Bond- new sealing strips can be purchased separately

Perfect protection and value retention for your GS! Our side covers fill two unsightly gaps in the rear area of the R1200GS and are not only visually appealing and perfectly shaped, but also practical!Experience over many years has shown that protecting the painted frame tubes in the boot area is absolutely necessary.Side Covers:The covers made from a mix of plastic and stainless steel are easy to install and protect the sensitive mechanics of the spring travel sensor just as perfectly as all components of the Dynamic ESA and the rear shock absorber.Not every GS rider appreciates the unobstructed view of hard-to-clean components in the rear area of the chassis, which is why our side covers not only protect against splash water on the road and kicked-up dirt during off-road rides, but also feature a smooth, easy-to-clean surface where dirt cannot settle!The visually two-part side cover is connected by an anodized, high-quality laser-engraved stainless steel part to form a perfect and easily removable unit. This also reduces the risk of getting caught with your boot on the vehicle frame, preventing any equipment from unintentionally snagging on the vehicle.Frame Protection:Unfortunately, the paint in this area is not able to withstand the normal stresses encountered during touring and with street boots. Frequent standing while riding, using enduro boots, or off-road use can quickly make the frame unsightly as the paint wears off, leaving the unprotected frame tubes exposed to all destructive influences.To prevent this problem from arising in the first place, we recommend installing our perfectly fitting plastic frame protectors from the very first kilometer! They integrate perfectly into the vehicle design and provide astonishing results with minimal effort!Scope of delivery:- Side covers, left and right (with socket preparation) - Small frame protection, left and right- Mounting materialsColor: black

wasserdichte Smartphonetasche speziell für den Hepco&Becker Tankrucksack "Street Daypack" und "Royster" Smartphone lässt sich durch Hülle bedienen wird mittels kleiner Klettverschlüssel am Tankrucksack an 3 Punkten befestigt kann im Handumdrehen entfernt werden

During many of our trips to dusty and dry countries, as well as during most sports and rally events, we faced the issue of fine dust repeatedly entering the intake tract through the air filters. This sometimes had significant consequences for the engine. Over the past few years, we have tried and tested many air filters. We found the solution to our dust problem in Australia. Unifilter Australia provided us with air filters for testing that met our expectations 100%. The Touratech Research & Development Team has used the Unifilter in all racing events and has since found no dust residue in the air filter box or engine. Another advantage of the filters made from "High-Tech Foam" is their long lifespan. The filter is not discarded when it gets dirty; instead, it is washed and re-oiled, allowing it to be reused repeatedly.Made in AustraliaThis way, you not only protect your engine but also your wallet. Scope of delivery:2x Snorkel FiltersImportant Tip:- In street use, the air filter should be checked and cleaned if necessary between the actual maintenance intervals due to its design (foam).- In off-road sports, the air filter is usually checked after each race and therefore automatically falls within the regular maintenance intervals.

Soziusfußrastenhalter Fussrastenhalter hinten linkss für BMW R1200GS LC R1250GS + Adventure Angeboten wird hier ein GebrauchtteilFahrzeug: R1200GS LC, R1250GS, R1200GS LC Adv. , R1250GS Adventure Hersteller: BMWNeupreis: 175,00 € Zustand: normale Gebrauchsspuren, leichte Kratzer, siehe Bilder Beschreibung: wird verkauft wie abgebildetTeilenummer: 46718526741

Soziusfußrastenhalter Fussrastenhalter hinten rechts für BMW R1200GS LC R1250GS + Adventure Angeboten wird hier ein GebrauchtteilFahrzeug: R1200GS LC, R1250GS, R1200GS LC Adv. , R1250GS Adventure Hersteller: BMWNeupreis: 175,00 € Zustand: normale Gebrauchsspuren, leichte Kratzer, siehe Bilder Beschreibung: wird verkauft wie abgebildetTeilenummer: 46718526742

Spark Plug Cover left Side Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Spark Plug Cover right Side Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Carbon Spritzschutz für BMW R 1200 GS (LC) Leicht und robust Ersetzt das originale Bauteil unter Verwendung der originalen Befestigungspunkte. Gewichtsersparnis von ca. 70% im Vergleich zum Original. Höhere Steifigkeit für verbesserte Performance. Premium Verarbeitung Gefertigt aus Prepreg-Material im Autoklaven. Schutz durch klare Kunststoffbeschichtung statt herkömmlichem Klarlack. Erhöhte Kratzfestigkeit und Beständigkeit gegen Umwelteinflüsse. Betont die dreidimensionale Wirkung der Carbonstruktur. Für leidenschaftliche Motorradfahrer, die das Beste für ihre BMW R 1200 GS wollen. Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

BMW has been using water cooling for new boxer engines since 2013. This allows for optimal performance combined with high durability. Technically implemented perfectly, the system has only one weak point: the sensitive water cooler.The Touratech radiator guard protects the vulnerable fins of the cooler from damage, providing a significant increase in safety!Flying stones, sticks, or other debris lose their threat. Your journey becomes much safer with minimal effort!Visually discreet yet unmistakably in the Touratech style, the radiator guard made of laser-cut, electropolished stainless steel integrates perfectly into the design of the GS.Material: electropolished stainless steel blackColor: silverScope of delivery: 2 parts (left and right)For tough off-road use, the radiator guard can also be secured with the included cable ties.Note: Covering the cooler can cause temperature problems for the engine under unfavorable conditions, at high outside temperatures, and at full load. Please pay attention to your water temperature gauge.

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Contour cutTIP: Can be universally mounted on aluminum cases! For example, on the original aluminum cases of the BMW R1200GS-ADV or BMW F800GS.Size: 10.5 x 3 cm

Egal wie die GS fällt, der Touratech Motorsturzbügel ist da, wo er gebraucht wird. Der umfassendste Rundumschutz den es für Boxermotoren je gab!Ein "Käfig" aus 25mm starken, 2mm dicken Edelstahlrohren umschließt die Zylinder vollständig. Auftretende Kräfte werden sicher abgeleitet und durch effektive Verteilung schonend abgebaut. Zahlreiche Montagepunkte, Sollbiegestellen und die zentrale Querstrebe gewährleisten nicht nur für die Zylinder, sondern auch für Rahmen und Motor ihrer R1200GS sicheren Schutz.Trotz der beeindruckenden Rohrdurchmesser ist der Sturzbügel so nah wie möglich an und symmetrisch zur Fahrzeugachse montiert. Er hat nahezu keinen Einfluss auf die Schräglagen- oder Bodenfreiheit.Er fügt sich perfekt in die Optik der R1200GS ein, rundet das Gesamtbild ab, gehört einfach dazu!Hergestellt ausschließlich aus robustem elektropoliertem Edelstahl, ist der Sturzbügel unempfindlich gegenüber Rost. Selbst tiefere Kratzer verlieren ihren Schrecken und können einfach verschliffen werden.Die Montagepunkte sind perfekt auf die R1200GS abgestimmt! Vollständiges Montagematerial selbstverständlich im Lieferumfang.TIPP für den perfekten Rundumschutz: Die ideale Ergänzung zum Sturzbügel ist unsere Sturzbügelerweiterung für die R1200GS (045-5161).Kurz:- vollständiger Schutz der Zylinder, auch nach hinten und nach oben- sicherer Abbau auftretender Kräfte, ohne Rahmen und Motor zu schädigen- keine Einschränkungen der Schräglagen- oder Bodenfreiheit- aus 25/2 mm Edelstahlrohren- Hergestellt in Deutschland- verwendbar zusammen mit Touratech Sturzbügelerweiterung (045-5161) und Zylinderschutz (045-5130)Auch geeignet für Sondermodell R1200GS "Rallye" mit Sonderausstattung "Sportfahrwerk".

Handlebar Adapter for BMW R1200GS LC + R1250GSThe handlebar adapter for the R1200GS model year 2013 and R1200GS LC from model year 2014-2021 and R1250GS improves your seating position by an optimal 50 mm. The handlebars come 50 mm closer to the rider and approximately 30 mm higher. This achieves a natural ergonomics for a healthier sitting position. You will clearly feel this advantage. No more tense, outstretched arms. You simply sit comfortably on your motorcycle and no longer lean so far forward towards the tank, which is a significant benefit for men. The tingling and numbness in your hands will now be a thing of the past.The conversion is quick and easy to implement: Remove the existing handlebar clamps - (Please ensure that the reservoirs for brake and clutch fluid do not tip over too much!) - and insert the lower part of the adapter. Now just place the handlebars into the new mounts and secure them with the included handlebar clamps. All necessary screws and an extension for the brake and clutch lines are included in the conversion kit. However, you will need to have the line extensions installed at a workshop, as they will need to be bled afterwards.NOT for BMW R1200GS AdventureAll items have been mounted and tested on original motorcycles - without any aftermarket modifications.

Fabric rear bag for strap attachment on various rear racks. Not waterproof. Practical and well thought out: securely attached to the passenger seat, the weight distribution is not negatively affected, and the bike remains neutral and agile. With a zipper and compression straps, it offers a variable volume of up to 25 liters. The design made of coated Cordura fabric is water-repellent and durable. With a carrying handle and straps, it can also be used as a backpack or shoulder bag.Small Sport StarCapacity 15-25 litersDimensions W x H x D: 26 x 33 x 20/33 cm