Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Custom Fit Paint Protection Film reliably protects against scratches in the paint easy self-installation due to precise fit no cutting with scissors or utility knife required can be removed at any time without residue weather and UV resistant Scope of Delivery Paint protection film set detailed instructions for application

Top case carrier consisting of a model-specific mounting kit and the Easyrack adapter plate for accommodating Hepco&Becker top cases or soft luggage (not suitable for top cases with universal plastic plate) Each Easyrack top case carrier is developed specifically for the model, seamlessly integrating into the harmonious overall appearance of the motorcycle. Thanks to its construction from high-quality aluminum combined with a steel base carrier, the Easyrack offers high strength and a very elegant look. Additional attachment points for luggage straps, for example to secure luggage rolls, are integrated into the design of the rack. solid base construction made of steel and an aluminum carrier plate Scope of delivery: model-specific Easyrack top case carrier + mounting kit + installation instructions no additional adapters are required for the top case attachment high-quality surface finish technically works almost the same as the Alurack top case carrier, except that the bracket for the top case attachment can be folded down when not in use, while the Alurack bracket stands rigidly upright the model-specific base carrier is the same for both Easyrack and Alurack luggage carriers do not require ABE or registration Recommended load: 5kg load (please observe model-specific notes, the provided installation instructions, and motorcycle manufacturer specifications) Note: Heavy luggage should generally not be transported in the top case, but in the side cases or tank bag. Recommended maximum speed: 130 km/h Designed for the standard condition of the machine. Not tested with accessories such as exhausts, license plate holders, or other turn signals.

The left Radiator cover for the BMW R1200 GS (LC) in gloss finish The weight is about 100 gramm. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Die Touratech Radnabenabdeckung besteht aus hochwertig eloxiertem Aluminium und die edle Laserbeschriftung setzt Akzente in Sachen Stil.Darüber hinaus bietet sie effektiven Schutz für die Radnabe Ihrer wertvollen GS.

BMW R1200GS + R1200GS Adventure LC from 2013 Cover frame triangle right frame cover with ABE The triangular frame cover right Carbon replaces the original part using the original Befestigungspunkte.Im focus is on weight reduction (usually savings of approximately 70% compared with the original component) and higher rigidity. The carbon part is according to the latest guidelines in the autoclave entirely of prepreg (see FAQ) material and in the next step, as usual with us, covered for protection against environmental influences with a clear plastic coating. This plastic coating exceeds the usual clear lacquer coating in the protection, scratch resistance and resistance enormous. But not only technically can score the coating, but also highlights the three-dimensional effect of the carbon structure still further.

This rear Mudgard fits to the R 1200 GS (LC) Modells from 2018!  This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. For this. thermic stressed. carbonpart. we use special high-temperature prepreg material (see FAQ) to avoid burning and staining of the part. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

optional connecting rod for the stainless steel crash bar stainless steel electropolished easy installation for off-road use

With the Touratech reinforcement strut, the BMW engine protection bar of the water-cooled R1200GS becomes a fully-fledged crash bar! Because only the additional support point ensures maximum safety.Thanks to its electropolished surface and the use of the same diameters, it fits both technically and visually perfectly with the BMW engine protection bar of the GS.The reinforcement strut made of robust 25mm stainless steel pipe is incredibly easy to install. This is made possible by a novel connection technology.With little effort, the Touratech reinforcement strut provides a lot of added value!Fits BMW R1200GS from 2017 (BMW engine protection bar = accessory) and BMW R1200GS-Adventure from 2017 (BMW engine protection bar = standard).Set for both sides!Can be combined with R1200GS-Adventure from 2017 with fairing crash bar extension 045-5165.Also fits the special model "Adventure Triple Black".

This product is not intended for installation by an end consumer. Installation should only be performed by individuals with the appropriate professional training or by a certified automotive workshop. For this reason, no installation instructions are included with the product. Prices are exclusive of installation costs. Additional Information

Reparatursatz InstrumentenkombinationAngeboten wird hier ein GebrauchtteilFahrzeug: R1200GS LC, R1200GS LC AdventureHersteller: BMWZustand: Gebraucht, 1 ganz leichter Kratzer auf der Scheibe, alle Halter okBeschreibung: wird verkauft wie abgebildetTeilenummer: 17428523118

This "linear" replacement spring is perfectly tuned to the original shock absorber of the BMW R1200GS / R1250GS. The shock absorber thus has a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA* Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop. Scope of delivery: - Replacement spring Linear 55 N/mm Front for original BMW shock absorber with Dynamic ESA. - Installation instructions. For all suspension solutions, both the rear and front areas of the motorcycle should be adjusted. You can find the suitable component for the rear of the BMW R1200GS / R1250GS in our accessory recommendation. Replacing only one component will not achieve optimal handling. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed document.

This "linear" replacement spring is perfectly tuned to the original shock absorber of the BMW R1200GS / R1250GS. The shock absorber thus has a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. Info: Fits only for *BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA* Our recommendation: The replacement spring installation should, especially with ESA shock absorbers, be carried out by a professional workshop. Scope of delivery: - Replacement spring Linear 150N/mm Rear for original BMW shock absorber with Dynamic ESA. - Installation instructions. For all suspension solutions, the rear and front areas of the motorcycle should be adjusted. You can find the suitable component for the rear of the BMW R1200GS / R1250GS in our accessory recommendation. When replacing only one component, optimal handling is not achieved. Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555 Please use our suspension check form and send us the completed form.

These linear replacement springs are perfectly tuned to the original shock absorbers of the BMW R1200GS / R1250GS models. The front and rear shock absorbers have a better setup for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range.   Info: Fits only for * BMW R1200GS / R1250GS 2013-2023 with BMW Dynamic ESA*   Our recommendation: The installation of the replacement springs should, especially with ESA shock absorbers, be carried out by a professional workshop.   Scope of delivery: - Replacement spring linear (55 N/mm) front for original shock absorber. - Replacement spring linear (150 N/mm) rear for original shock absorber. - Installation instructions.   Do you have further questions? We are happy to advise you personally, please contact us. Email: [email protected] Phone +49 (0)7728-9279-1555   Please use our suspension check form and send us the completed document.                        

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

This is a used part offered Vehicle:  R1250GS + Adventure Manufacturer: BMW Condition: normal signs of use Description: sold as shown, scratches Part number: 63138534352

BMW R1200GS Rim - Decorative Stripes in Various Colors Product Description Glossy Rim Decorative Stripes Pre-curved 8 mm wide decorative stripes Rear wheel 17" (inch) - Front wheel 19" (inch) High-quality vehicle film Can be removed without residue at any time Resistant to most oils, greases, fuels, aliphatic solvents, weak acids, salts, and alkalis Available in various colors (see selection) Special colors available upon request NOTE: (not applicable to all decorative sets) The decorative stripes are manufactured directionally (the decoration points left or right in the same direction) Scope of Delivery Rim decorative stripes Detailed instructions for application

Rocker Cover (Right) Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 - This carbon rocker covers are very strong. but have a total of less than 500 gramms each. They not only give the hightech watercooled BMW boxer. the absolute hightech look. they do the best job in protecting your bike! - This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

RockerCover Cover (Left) Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Rocker Cover Cover (Right) Carbon - BMW R 1200 GS (LC) from 2013 / R 1200 R (LC) from 2015 / R 1200 RS (LC) from 2015 This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.