The standard bracket of the aluminum rack is not compatible with the aluminum top case 35. Therefore, this bracket is used as an adapter and is bolted to the aluminum rack.

Attachment on the outside of the case. Provides the option to carry your own accessories with straps (not included in the delivery) on the case. NOTE: Holes must be drilled into the case/top case.

waterproof easy to attach for Daypack 2.0 and Royster tank bags also suitable for tablets sturdy yet flexible back panel - no flapping!

compatible with almost all model-specific HEPCO&BECKER side case carriers, either permanently mounted or in the Lock-it version (not included) Absolutely waterproof due to glued special seal Impact-resistant plastic components Made from 1.5mm thick anodized aluminum sheet Dual-opening lid - lid removable Top loader: Quickly and securely load from above thanks to generous opening Includes luggage net on the inside of the lid Includes key and locking cylinder Lid lockable, case lockable to the carrier Please enter desired locking in the comment field during the ordering process Case sets are automatically delivered with the same key Child's play to remove from the case carrier Perfectly adaptable to your needs through a comprehensive range of accessories Not suitable for a helmet Recommended load: 10kg per case (please observe the notes from the vehicle-specific carrier and the motorcycle manufacturer's specifications) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Please observe the vehicle-specific notes of the carrier and the model-specific information from the motorcycle manufacturer.

suitable for almost all model-specific HEPCO&BECKER side case carriers, either permanently mounted or in the Lock-it version (not included) Absolutely waterproof due to glued special seal Impact-resistant plastic components Made from 1.5mm thick anodized aluminum sheet Dual-opening lid - lid removable Top loader: Quickly and securely loadable from above thanks to generous opening Includes luggage net on the inside of the lid Includes key and locking cylinder Lid lockable, case lockable on the carrier Please enter desired locking in the comment field during the ordering process Case sets are automatically delivered with the same key Child's play to remove from the case carrier Perfectly adaptable to your needs through a comprehensive range of accessories not suitable for a helmet Recommended load: 10kg per case (please observe the notes from the vehicle-specific carrier and the motorcycle manufacturer's specifications) Luggage systems generally do not require ABE or registration Vehicle-specific notes: Please observe the vehicle-specific notes of the carrier and the model-specific information from the motorcycle manufacturer.

Der Touratech Kofferdeckel-Schutzbelag ist viel mehr als ein gewöhnlicher Kofferdeckelaufkleber! Wozu braucht man das? Weil die Beanspruchungen im realen Reise-Alltag eben höher sind.Durch die spezielle "Raindrop" Oberfläche sorgt der passgenau zugeschnittene Belag für optimale Griffigkeit und Rutschschutz. Er verbessert den sicheren Halt Ihres Gepäcks auf dem Deckel und entlastet damit die Verzurrungen.Die Kofferschutzabdeckung widersteht selbst härtesten Beanspruchungen, z.B. wenn der Koffer als Motorrad-Montageständer genutzt wird.Das zwei Millimeter starke Gummipolster aus Polyuretan ist nicht nur extrem widerstandsfähig, es lässt auch Kratzer und selbst tiefe Riefen im Kofferdeckel einfach verschwinden. Ein Vollsaugen der Schutzfolie mit Wasser ist dennoch ausgeschlossen.Der Touratech Kofferdeckel-Schutzbelag ist jeweils für alle ZEGA Evo Koffergrößen verfügbar. Einfach in der Auswahl die passende Größe wählen (31l, 38l oder 45l).Tipp: Der Polyurethan-Antirutschbelag hilft sogar gegen einen kalten Hintern, wenn der Koffer als Sitz genutzt wird!Die selbstklebende Antirutschmatte lässt sich im Handumdrehen schnell und einfach auf dem Kofferdeckel aufbringen.- hohe Rutschhemmung- hohe Verschleißfestigkeit- schlagzäh- langlebig- passgenau zugeschnitten (je 2mm Abstand zu Kofferdeckel-ecken und -kanten)Stärke: 2 mmFarbe: schwarzMaterial: PolyurethanQualität:Dekra geprüfte Qualität nach VDI 2700, Blatt 14 Rutschhemmung geprüft nach DIN 51130Reibbeiwert µ = > 0,80

Angeboten wird hier ein GebrauchtteilFahrzeug: F800S, F800ST, F800R, F800GS, F800GS Adventure, F700GS, F650GS Hersteller: BMWNeupreis: 293,89 € Zustand: normale Gebrauchsspuren, guter Zustand, siehe Bilder Beschreibung: wird verkauft wie abgebildetTeilenummer: 11148524161Nummer auf dem Bauteil: 6 610 956

Angeboten wird hier ein NeuteilFahrzeug: F800S, F800ST, F800R, F800GS, F800GS Adventure, F700GS, F650GS Hersteller: BMWNeupreis: 20,80 € Zustand: neu Beschreibung: wird verkauft wie abgebildetTeilenummer: 11117707906

The ideal bag for all aluminum cases and luggage racks! If you want to securely fasten your tools, need additional and expandable storage space on the case lids, are looking for a bag for various motorcycles or luggage racks, and desire absolute robustness and durability, this bag is perfectly equipped for you!Thanks to different attachment loops, it is possible to secure the bag in various ways with the included straps. Additionally, internally sewn loops effectively prevent the tool roll or other heavy items from slipping.With a circumferential zipper, the volume can be quickly doubled if needed, and small items can be stored in the outer pocket. A sturdy carrying handle makes handling the bag easier.- washable and easy to clean- ergonomic, sturdy carrying handle for practical transport away from the motorcycle- easily expandable via all-around zipper- built for extreme loads and long durability - low weight with high payload and large usable volume- elastic, reflective rubber bands with quick-release for fast attachment of gloves or rain jackets - flat outer pockets for quickly needed small items- large main compartment without annoying dividers for maximum space and individual loading- non-slip, soft base plate to avoid paint damage and ensure secure holdDimensions: (L x W x H) approx. 35 x 18 x 15/25 cm; Volume: approx. 6/12 litersColor: blackAttention: Please use a paint protection film if necessary! TIP: Can be universally mounted on aluminum cases! E.g., the original aluminum cases of the BMW R1250GSA/R1200GSA.

BMW F700GS F800GS Luggage Rack for Vario Topcase New Version Black Product Description This mounting kit secures the original BMW Vario Topcase in the new version to the vehicle. Delivery includes complete screw set and plate. Fits the following vehicles: K70 F 700 GS K72 F 800 GS 13 ( Example Image !!! )

The developers at BMW have created a motorcycle with the F800GS that invites you to take off-road excursions. Some of the positive off-road characteristics have been further enhanced by our Touratech developers.This engine protection is an absolute revolution! Touratech has placed great emphasis on stability and functionality.Major damages such as holes in the engine block can be effectively avoided with the large Touratech engine protection.Of course, it is also suitable for the BMW F700GS and F650GS (Twin)!For maximum stability, the multiple indented recesses in the 4mm thick aluminum base plate play a key role, while the force of an impact is distributed over 6 mounting points thanks to an additional lower stainless steel mounting plate on the engine. The ground clearance is not restricted by these two base plates. Another advantage is that the engine protection is raised at the front to such an extent that it also protects the oil filter and oil cooler.Additionally, plastic rails at the lower part of the base plate ensure that the already recessed screw heads are completely covered. This allows the engine protection to be easily disassembled even after heavy off-road use. Last but not least, the plastic rails facilitate the "sliding over" of stones, rocks, or tree stumps.Almost incidentally, they also prevent dirt from settling.All in all, the large Touratech engine protection for the BMW F800GS: A product that meets the highest technical demands and is visually an absolute "highlight"!

Motorrad Unterfahrschutz: Motorschutzplatte für BMW F 800 GS (2008-2018), Silber Bereits ein Bürgersteig kann eine unangenehme und heftige Bodenberührung bedeuten, was zu Schäden am Motorgehäuse führen kann. Unsere Motorschutzplatten schützen die Krümmer und den Motorblock vor Stößen und Steinschlag, selbst bei heftigstem Bodenkontakt perfekt. Mit unserem Unterfahrschutz für F 800 GS wertest du dein Motorrad nicht nur in puncto Sicherheit auf, sondern verpasst ihr auch ganz automatisch einen gewissen Offroad-Look. Natürlich modellspezifisch gefertigt aus ca. 4mm starkem, hochfesten Aluminium lässt unsere Hepco&Becker Motorschutzplatte durch ihre spezielle Form genug Luft zur Kühlung durch und ist natürlich so angewinkelt, dass Wasser wie etwa Regenwasser oder Spritzwasser nach Außen abgeleitet werden, um somit zusätzlich vor Rostbildung zu schützen. Sie wertet dein Motorrad optisch nochmal auf und lässt dich garantiert nie im Stich. Eigenschaften & wichtige Details: Material: Hochfestes Aluminium, made in Germany Oberflächenfinish: Gebürstet, eloxiert Farbe: Silber eloxiertFür die Baujahr(e): 2008-2018Bietet zusätzlichen Schutz für empfindliche Teile an Krümmer und Motorblock Lieferumfang: Motorschutzplatte für BMW F 800 GSMontagematerial / Schraubensatz Bebilderte Montageanleitung (DE / EN) Wichtige Hinweise: Ein Unterfahrschutz ist eintragungsfrei – Sie benötigen also keine Eintragung in die Papiere und entsprechend auch keine ABE. Bitte beachten Sie die Anbauanleitung sowie modellspezifische Hinweise, ob es zu Einschränkungen kommen kann. Unsere modellspezifischen Produkte sind, sofern nicht explizit anders angegeben nur für den Serienzustand der Motorrads entwickelt! Bei bereits verbauten Original- oder Zubehörteilen kann es zu Einschränkungen kommen, diese finden Sie in der Anbauanleitung.

With the net for the inside of the lid, we create additional space and organization. For example, the rain jacket or the toiletry bag can be easily attached to the lid of the case. Or you can use the net to secure one of our small bags or cubes in the lid. This way, you always have important items readily available as soon as you open the case.TIP: Can be universally mounted on aluminum cases! For example, the original aluminum cases of the BMW R1250GS-ADV or BMW F850GS.

O-Ring Athena   Athena, an international company founded in 1973, develops and manufactures seals, technical spare parts, and metal components for the industrial and motorcycle sectors according to the highest quality standards UNI EN ISO 9001, 9002, 14001, and UNI ISO / TS 16949. Athena is the market reference point for the preparation of gasket sets with a complete range for scooters, on- and off-road motorcycles, ATVs, and Harley Davidson. In the off-road world, the Athena pool of engineers and technicians collaborates with the leading international teams from MXGP and AMA Supercross to develop new product lines. Athena products undergo strict quality checks to guarantee customers high standards in terms of performance, competitiveness, and reliability. Athena offers the largest selection of replacement seals available on the market and has over 40 years of experience in the industry. The Athena gasket kits are based on solid know-how, continuous technological development achieved by the in-house team of engineers and designers, and production that is strictly aligned with the parameters required by OEMs. Athena offers a range of seals with excellent sealing properties, available as sheets made of paper, cellulose, metal, and rubber, and in various thicknesses to meet customer requirements.Technical Data:Range:   No Inner Diameter:   75 mmOuter Diameter:   80 mmHeight:   2.5 mmGasoline Resistant:   Yes Oil Resistant:   Yes

O-Ring Fuel InjectorTechnical Data:Range: No Inner Diameter: 8.3 mmOuter Diameter: 14.4 mmHeight: 3.05 mmMaterial: Rubber Design: round Fuel Resistant: Yes Oil Resistant: Yes

For use of the Duonix Bikescan-100 with the OBD-II interface on BMW motorcycles.

Robust Aluminum Cases Volume: Case: approx. 44 l (right), approx. 38 l (left) Maximum load: 8 kg (per case) Recommended maximum speed with cases or top case: 160 km/h Standard tank protection bars serve as case holders Optional: Inner bags for cases and top case Backrest for aluminum top case Carrying handle for aluminum cases and top case

Robust Aluminum Cases Volume: Case: approx. 44 l (right), approx. 38 l (left) Maximum load: 8 kg (per case) Recommended maximum speed with cases or top case: 160 km/h Standard tank protection bars serve as case holders Optional: Inner bags for cases and top case Backrest for aluminum top case Carrying handle for aluminum cases and top case

With the backrest for the Variotopcase, the passenger enjoys more comfort both on short trips and on long tours. Increased comfort for the passenger.

Manufacturer: BMW Condition: NEW Description: sold as shown, D = 70mm Part Number: 51147721222 Fits:

The practical alternative or addition to the tank bag: The bag for the luggage bridge features a waterproof main compartment with a volume of 4.5 liters. This compact soft bag made of durable polyester fabric offers enough storage space for the daily commute or a day trip. The main compartment includes an inner bag with a roll closure and sealed seams, keeping your belongings clean and dry. A mesh pocket in the lid holds various small items. The three-sided zipper is water-repellent and allows for quick access, while the carrying handle makes it easy to transport the soft bag to and from the motorcycle. The molded EVA bottom with a non-slip coating helps secure it on the bike, and it is mounted by sliding it onto the luggage bridge with additional strap fastening. The back of the black bag is adorned with a BMW Motorrad logo. Compact soft bag for short trips. Waterproof main compartment. Subtle design. Color: Black. Dimensions (L x W x H): 23 x 28 x 17 cm, Volume: 4.5 liters.

Robust protection made of aluminum (3 mm). Protects the engine and exhaust manifold from stone impacts and ground contact during sporty off-road use. Weight: approx. 1.6 kg. without mounting parts

Weight: approx. 2.3 kg. The robust engine protection bar protects the engine in case of minor falls and other unfortunate mishaps. Also compatible with plastic and aluminum engine protection. Without mounting parts!!! Material: Stainless steel

Weight: approx. 2.3 kg. The robust engine protection bar protects the engine in case of minor falls and other unfortunate mishaps. Also compatible with plastic and aluminum engine protection. Without mounting parts!!!