JMP Connector Expansion Rivet compatible with the following vehicles: AUDI A6, S6 BMW E81, E82, E87, E88, E36, E46, E90, E91, E92, E93, E34, E39, E60, E61, E65, E66 F01, F02, X5, X6, Z4 CITROEN BX, Xantia, ZX PEUGEOT 307, 406, 806, Expert, 1+2, Partner SEAT Leon `04 for hole Ø min. (mm): 5.0for hole Ø max. (mm): 5.5Head diameter (mm): 10.0Height 1 (mm): 11.5Height 2 (mm): 23.5 Installation side: wheel sideInstallation side: interior trim Material: plasticColor: black Contents: 10 Packaging unit: 1 Technical Data:Application: Motorcycle Car Vehicle Manufacturer: Audi BMW Citroen Mercedes Benz Peugeot Renault Seat VAG VW Type: Expansion Rivets Hole Diameter: 5.0 mmSupport Diameter: 10.0 mmInstallation Length: 11.5 mmMaterial: Plastic suitable for: 5.0 mm hole

Die Festscheiben der Brembo Oro-Serie werden in einem Guss aus Edelstahl hergestellt. Die Fertigung entspricht hierbei den strengen Toleranzen im Bezug auf die Konstruktions- und Bauart. Durch die Bearbeitungszyklen wird eine maximale Eignung und Rundlaufsicherheit gewährleistet.   Brembo konnte aufgrund seiner umfangreichen Erfahrung die geeigneten Formen, Toleranzen und Größen für jeden Motorradtyp und Einsatz bestimmen. Tatsächlich verbessert die spezielle Formgebung der Brembo-Scheiben durch eine sorgfältige Untersuchung der Bearbeitungstoleranzen die Übertragung des Bremsmoments und bietet gleichzeitig eine verbesserte Resistenz gegen mechanische und thermische Belastungen.

Replaceable open cartridge kit from YSS.Adjustable spring preload, rebound, and compression damping through a specially developed cap. The included stiffer spring can be replaced if necessary. Transforms a dull stock fork into a perfectly adjustable fork.Technical Data:Spring Type: Linear Length: 380 mmDiameter 1: 39.5 mmDiameter 2: 39.5 mmSpring Rate 1: 6 N/mmRecommended Viscosity: 5W Manufacturer: YSS

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

The Dual Injector offers several advantages, as the Scorpion Dual Injector is mounted using a flexible multi-dispenser plate and can thus be individually adhered to all swingarm shapes. Optionally, the injector can also be directly screwed onto chain guides, swingarms, and much more. The robust and shock-absorbing plastic reinforcement around both nozzles inevitably directs every drop of oil to the chain / sprocket. Additionally, the precise dosing extends the refill intervals.The double nozzle can be retrofitted to any already installed system.- optimal lubrication on both sides of the chain- saves oil and increases wear protection- easy and flexible installation- perfect fit for the new multi-dispenser plate- optimally adjustable through individual, detachable sections- compatible with all Scottoiler systems

Let's be honest: Do you really use the DIN socket on your BMW? Simply replace it with the much more useful dual USB socket! Charge your smartphone, camera, GPS, etc. without an adapter while riding!- Input voltage: 10 to 40 V- Output voltage (USB ports): 5 V +/- 5%- Overvoltage, overheating, and short-circuit protection- Only compatible with CanBus- Port 1: 2.3 A / Port 2: 1.0 A- Intelligent device recognition: detects Apple (complies with MFi standard) or Android (BC1.2)- Weatherproof: independent port rubber covers- Plug-and-play replacement for BMW motorcycle DIN socket

BMW F 800 GS F800GS Easyrack Topcase black EasyRack - the alternative to AlurackHepco & Becker Easy racks are specially designed for our top cases konzipiert.Sie ​​can so that every top case (except Orbit TC and standard TC) of us, whether aluminum or plastic mounted on this carrier and thus have large selection of different combinations. But not only newly purchased, even existing Hepco & Becker top boxes passen.Jedes Easyrack is specially designed for the appropriate motorcycle and produced. Thanks to the construction of high-quality aluminum, the Easyrack granted a high strength and a very elegant appearance. The Easyrack also provides additional attachment points for luggage straps for example, roll bags attach to können.Der highlight: the top case mounting necessary, the bracket disappears when not in use by simply moving in Easyrack and thus no longer interfere with the dynamic look of the motorcycle. The facts: • with folding bracket for own luggage and all Hepco & Becker top boxes • Made of aluminum, • High strength, high-quality optics • Integral plastic trim, • bracket with ball locking system and mechanical stop • Rotating attachment for luggage straps • Instead Alurack universally montierbarNur for Hepco not suitable & Becker top boxes for side cases!

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 8 546 386 is used on the following vehicles:

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. the Carbon Engine Cover weighs about 105 gram

TOURATECH Fernreisefußrasten * Works *, low, for BMW R850GS, R1100GS, R1150GS, R1150GS Adventure, R1200GS + Adventure by 2012, R80GS, R100GS, F800GS, F700GS, F650GS (TWIN), F650GS, F650GS Dakar, G650GS, G650GS Sertao item Description  Touratech WORKS steel footrests. The best that Touratech has your boots to offer. Specially developed team according to the requirements of the Touratech works racing. The 52mm wide boots gentle 4mm thick stainless steel claw profile, with its special form the optimal combination of grip and self-cleaning. Due to the rounded edges the boot soles are not damaged, the open design ensures that mud and stones fall under the boots of the footrests and the boot profile has a secure hold on the catch. The slim design and taper to the outside of the ground clearance increased, which are especially when driving through deep ruts a great advantage compared to regular Enduro footrests or series products bietet.Die footrests 20 mm lower than the original notches (without rubber insert).  The Touratech Works foot pegs have been specially strengthened at the reception and are thus significantly less susceptible to impacts. Even the look of the Works products are a highlight. Blasted stainless steel with a special laser inscription records this product and shows visually the noble origins in extreme enduro Sport.- 52mm wide boots gentle 4mm thick stainless steel Krallenprofil- optimum combination of grip and Selbstreinigung- increased ground clearance by sleeker design significantly more resistant to Aufschläge- increased recording, finished with blasted surface and laser inscription Including car-specific reports according to § 19 STVZO.BMW F800GS: all years!

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

Pin for Footpeg    Stainless Steel   Dimensions: - Total Length: 37mm - Head Diameter: 11mm - Bottom Diameter: 8mm  

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout accuracy are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   300 mmInner Diameter:   105 mmBolt Circle:   120 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   5 mmDesign:   fixed Manufacturer:   Brembo

Angeboten wird hier ein Neuteil Fahrzeug: F800GS Hersteller: BMW Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 46717701199

Mounting bracket / base mount for the zumo 340/ 345/ 350/ 390/ 395 for attachment to the motorcycle.Replacement mounting bracket compatible with the zumo 340/ 345/ 350/ 390/ 395. - To attach to the handlebar, you will need "optional" accessories from RAM and/or our Touratech handlebar mount.- With the optional Garmin connection cable (01-065-0418-0), the zumo 340/ 345/ 350/ 390/ 395 can also be connected to the electrical system of your motorcycle.

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

The ride of your life with the zumo® XT2 and the best motorcycle navigation from Garmin ever. Discover unforgettable tours and diverse routes along popular motorcycle roads, featuring MICHELIN Scenic Roads and Garmin Adventurous Routing™. Our brightest and largest zumo® display is easy to read in all conditions. Connect with other bikers via the Tread® App, share your ride dynamics and GPX data, or create Group Rides for shared trips. With real-time information on weather and traffic, as well as excellent connectivity through Bluetooth calling and Smart Notifications, you’ll always stay up-to-date. Pair your zumo® XT2 with the inReach® Mini 2 (sold separately) for global satellite communication or use the interactive SOS emergency call in case of an emergency.HighlightsRobust motorcycle navigation with a bright 6-inch (15.2 cm) HD displayVisual route planner - including Garmin Adventurous Routing™,MICHELIN Scenic Road, and popular motorcycle routesCompatible with Tread® App, including Group Ride MobileRide summary with data on your ride dynamicsMICHELIN Green Guide, Trendy Places, and Local SpotsGarmin real-time services for traffic, weather, and fuel pricesSmart & Connected - notifications, calling, and moreAccident notification via Tread® App and mobile connectionCompatible with inReach® and Garmin Powerswitch™Included in deliveryzumo® XT2Motorcycle mountMounting kitMotorcycle connection cableUSB cableDocumentation

Gasgriff Heizgriff rechts für BMW K1200S K1200R + Sport F800 S ST F650GS Twin F800GSAngeboten wird hier ein NeuteilFahrzeug: K1200S K1200R + Sport F800S F800ST F650GS F800STHersteller: BMWZustand: NeuwertigBeschreibung: wird verkauft wie abgebildetTeilenummer: 61317708286

Gepäckbrücke Gepäckträger Haltegriff für F750GS F800GS F850GS F900GS Angeboten wird hier ein Gebrauchtteil Fahrzeug: F900GS, F850GS, F800GS, F750GS, R1200GS LC, R1250GS Hersteller: BMW Zustand: normale Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet , guter Zustand Teilenummer: 46728564644

Stabile Aluminiumplatte zur Verbreiterung auf nahezu allen Gepäckbrückenmit gerader Auflagefläche, wenn kein Topcase, sondern loses Gepäck transportiert werden soll. Durch die hochgezogenen Kanten und die zusätzlichen Haltepunkte ist die Verbreiterung ideal zum sicheren Transport auch größerer Gepäckrollen, Reisetaschen, Zelte, Seesäcke etc. geeignet.Konstruktion aus Aluminium mit hoher Festigkeit und hochwertiger OptikBefestigungsmöglichkeiten für GurteNicht geeignet zur Topcasemontageinkl. Montagematerial und Anleitunghochwertige KunststoffbeschichtungEmpfohlene Zuladung: 5kg (Bitte beachten Sie die modellspezifischen Hinweise, sowie die motorradherstellerspezifischen Herstellerangaben. Schweres Gepäck sollte generell nicht auf dem Heck, sondern in den Seitenkoffern oder dem Tankrucksack transportiert werden.

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt