Brake pads & brake discs

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: blue with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

Bleed Screw

Bleed Screw JMP Bolt   Made from 316 stainless steel, which offers the following advantages:   - excellent strength - outstanding corrosion resistance - high resistance to acids   The offered stainless steel screws are all polished to a high gloss.     Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.    

Bleed Screw JMP Bolt   Made from 316 stainless steel, which offers the following advantages:   - excellent strength - outstanding corrosion resistance - high resistance to acids   The offered stainless steel screws are all polished to a high gloss.     Stainless steels are iron alloys with a minimum of 10.5% chromium, with other elements added (nickel, molybdenum, titanium, copper, carbon, nitrogen) to enhance properties such as formability and strength. A chromium-rich oxide layer gives stainless steel its corrosion resistance.  

Brake Caliper Piston Repair Kit

Brake Caliper Piston Repair Kit

Bracket for Brake Hose JMP Bolt   Made from high-strength aircraft aluminum. - anodized in color 60% lighter than stainless steel.  

Bracket for Brake Hose JMP Bolt   Made from high-strength aircraft aluminum. - anodized in color 60% lighter than stainless steel.    

Bracket for Brake Hose JMP Bolt   Made from high-strength aircraft aluminum. - color anodized 60% lighter than stainless steel.

SP Sintered Metal Brake Pads for Rear (SP) A sintered mixture specifically designed for rear wheel brakes (SP) that offers improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

LA Sintermetall Longlife Street Brake Pad for Front   A brake pad designed for longevity. It is characterized by excellent efficiency in all areas of use.

Die Festscheiben der Brembo Oro-Serie werden in einem Guss aus Edelstahl hergestellt.Die Fertigung entspricht hierbei den strengen Toleranzen im Bezug auf die Konstruktions- und Bauart.Durch die Bearbeitungszyklen wird eine maximale Eignung und Rundlaufsicherheit gewährleistet. Brembo konnte aufgrund seiner umfangreichen Erfahrung die geeigneten Formen, Toleranzen und Größen für jeden Motorradtyp und Einsatz bestimmen. Tatsächlich verbessert die spezielle Formgebung der Brembo-Scheiben durch eine sorgfältige Untersuchung der Bearbeitungstoleranzen die Übertragung des Bremsmoments und bietet gleichzeitig eine verbesserte Resistenz gegen mechanische und thermische Belastungen.

Dank des Einsatzes von hochwertigen Werkstoffen bieten die schwimmend gelagerten Scheiben hervorragende Leistungen.Sie bestehen aus einem Edelstahl-Reibring und einem Bremstopf aus CNC-bearbeiteter Aluminiumlegierung, der mit zehn Mitnehmerzapfen verbunden und dann eloxiert wurde.

  EBC Brake Pads Double - H Sinter Material MADE IN USA, especially for motorcycles with original sintered pads A quality with maximum braking power, extreme durability, and no fading, particularly suitable for use with heavy and fast machines or in road racing. Perfectly suitable for INOX or EBC Pro-Lite brake discs. Brake pads are also optimal for cast brake discs. Double - H brake pads are TÜV certified and have an ABE.

All brake discs come with an ABE, also for scooters. The discs are low-wear and have a lifespan up to 30% longer compared to some comparable replacement parts. All variants: Allround, RAC, and EC-offroad discs are made from extremely dimensionally stable and hardened steel. The precise surface grinding (thickness deviation of 2/100mm) prevents vibrations and improves the fit of the pads. A uniform temperature rise and fall allows for a constant pressure point. The floating brake discs have titanium-colored anodized, machined aluminum inner rings.Floating discs do not rattle, as the high-quality stainless steel floaters are tensioned with well discs. A new special alloy prevents excessive corrosion.Laser technology enables a lightweight design with fine contours. Each brake disc can be individually paired with brake pads from the TRW-Lucas range.TRW-Lucas floating brake disc Allround - Round outer contour with perforated brake edge- Available in rigid and floating variants- Coordinated design from front to rear axle Technical Data:Outer Diameter: 300 mmInner Diameter: 105.3 mmBolt Circle: 120 mmNumber of Holes: 6 Hole Diameter: 6.5 mmThickness: 5 mmDesign: floating Manufacturer: TRW

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout accuracy are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   300 mmInner Diameter:   105 mmBolt Circle:   120 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   5 mmDesign:   fixed Manufacturer:   Brembo

Halterung für Bremsschauch JMP Bolt Aus hochfestem Flugzeug Aluminium. - farbig eloxiert60% leichter als Edelstahl.

SA Sintered Metal Front Brake Pads (SA) A sintered mixture specifically designed for front wheel brakes, providing improved braking performance under all operating conditions. An ideal alternative to OE brake pads for optimal performance on the road.

Standard Lining Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.

Especially when riding off-road, it is extremely important to always have a secure footing on the brake. With our enlarged support, the boot always finds its way to the lever, and the controllability is noticeably improved.Material: high-quality stainless steelBMW F800GS: for all model years!

The brake fluid reservoir on the BMW is quite openly accessible. This poses a risk of damage or unauthorized access. The Touratech brake fluid reservoir guard made of laser-cut stainless steel effectively prevents damage and access to the cap of the reservoir. Of course, the fluid level remains easily readable. The cover is simply screwed onto the existing mounting point.

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: black with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt