Product Description: original BMW workshop equipment Contents 50 ml 29.49 €/100 ml (base price indication according to §2 German Price Indication Regulation (PAngV) for sales in Germany) Safety data sheet available upon request May cause allergic reactions For professional users only

BMW Lubricant Grease Straburags for Cardan Footpeg Joints Shift Parts Product Description: original BMW workshop equipment has been used for many years for e.g. cardan shafts, plug connections, joints strongly adhesive good corrosion protection prevents tribocorrosion (combined effect of corrosion and wear) water-resistant - even under outdoor conditions approved by Knorr Brake N (12006-1.23 product info available) safety data sheet available upon request contains Pin-2(3)-enes. May cause allergic reactions content 50g 39.90 €/100g (basic price indication according to §2 German Price Indication Regulation (PAngV) for sale in Germany)

BMW Original Repair Connector 3-Pole No. 611657 Item Description This offer includes 1 repair connector 3-pole. This offer applies to the red marked connector!!! ( Illustration No. 7 ) BMW Part Number: 83300413586 Fits various BMW motorcycles:

BMW Original Repair Connector 4-Pole No. 610615 Item Description This offer includes 1 repair connector 4-pole. This offer applies to the red marked connector!!! ( Illustration No. 5 ) BMW Part Number: 83300402340 Fits according to part number for the following vehicles: K50 (R 1200 GS)   (10/2011 — 10/2016) K51 (R 1200 GS Adventure)   (09/2012 — 10/2016) K52 (R 1200 RT)   (01/2013 — 10/2016) K53 (R 1200 R)   (11/2013 — 10/2016) K54 (R 1200 RS)   (06/2014 — 10/2016) K25 (R 1200 GS)   (12/2002 — 12/2012) K25 (R 1200 GS Adventure)   (03/2005 — 07/2013) K25 (HP)   (08/2004 — 11/2008) K26 (R 900 RT, R 1200 RT)   (11/2003 — 06/2014) K27 (R 1200 R)   (11/2005 — 07/2014) K28 (R 1200 ST)   (05/2003 — 11/2007) K29 (R 1200 S, HP2 Sport)   (11/2004 — 07/2010) K21 (R nineT)   (01/2013 — 08/2016) K23 (R nineT Scrambler)   (09/2015 — 10/2016) K40 (K 1200 S, K 1300 S)   (04/2003 — 09/2015) K43 (K 1200 R, Sport, K 1300 R)   (03/2004 — 07/2015) K44 (K 1200 GT, K 1300 GT)   (11/2004 — 10/2010) K42 (HP4)   (09/2011 — 07/2014) K46 (S 1000 RR)   (09/2008 — 10/2016) K47 (S 1000 R)   (02/2013 — 07/2016) K49 (S 1000 XR)   (05/2014 — 09/2016) K48 (K 1600 GT, K 1600 GTL)   (01/2010 — 10/2016) K70 (F 700 GS)   (06/2011 — 10/2016) K71 (F 800 S, F 800 ST, F800GT)   (12/2004 — 09/2016) K72 (F 650 GS, F 800 GS)   (10/2006 — 10/2016) K75 (F 800 GS Adventure)   (05/2012 — 10/2016) K73 (F 800 R)   (12/2005 — 09/2016) R13 (F 650 GS, GS Dakar)   (02/1999 — 10/2007) K14 (F 650 CS)   (11/2000 — 07/2005) K18 (C 600 Sport, C 650 Sport)   (02/2011 — 10/2016) K19 (C 650 GT)   (01/2011 — 10/2016) R13 (G 650 GS)   (02/2008 — 10/2015) R13 (G 650 GS Sertão)   (07/2010 — 11/2014) 259 (R 850 GS, R 1100 GS)   (04/1993 — 07/2006) R21 (R 1150 GS)   (09/1998 — 11/2003) R21 (R 1150 GS Adventure)   (07/2001 — 09/2005) 259R (R 850 R, R 1100 R)   (09/1993 — 11/2002) 259 (R 850 RT, R 1100 RT)   (05/1994 — 11/2001) R28 (R 850 R, R 1150 R, Rockster)   (11/1999 — 07/2007) R22 (R 850 RT, R 1150 RT, R 1150 RS)   (01/2000 — 03/2006) 259C (R 850 C, R 1200 C)   (04/1996 — 07/2004) 259 (R 1100 S, R 1100 RS)   (01/1992 — 07/2005) 259C (R 1200 C Montauk)   (10/2002 — 10/2004) 259C (R 1200 C Independent)   (05/2000 — 08/2004) K30 (R1200 CL)   (10/2001 — 07/2004) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K 1200 RS, K 1200 LT)   (04/1996 — 07/2008) K41 (K 1200 GT, K 1200 RS)   (03/2000 — 07/2005) C1   (10/1999 — 04/2003)

BMW Original Rear Brake Disc NEW Item Description This offer includes 1 rear brake disc . This offer applies to the item in the red marked circle!!! ( Image No. 1 ) BMW Part Number: 34217664102 Fits according to part number for the following vehicles: R 1200 GS 04 R 1200 GS 08 R 1200 GS 10 R 1200 GS Adventure 06 R 1200 GS Adventure 08 R 1200 GS Adventure 10 HP2 Enduro HP2 Megamoto R 1200 RT 05 R 1200 R 10 R 900 RT 05 SF R 900 RT 10 SF R 1200 R 06 R 1200 R 11 R nineT R nineT Scrambler K 1200 S K 1300 S K 1200 R K 1200 R Sport K 1300 R S 1000 XR F 700 GS F 700 GS 17 F 800 GT F 800 S F 800 ST F 650 GS F 800 GS 08 F 800 GS 13 F 800 GS 17 F 800 GS Adventure F 800 GS Adventure 16 F 800 R F 800 R 15

New! 2 pieces BMW part number: 71607660615 Fits the following vehicles according to the part number:

JMP starter brushes for Japanese motorcycles. As original spare parts, starter brushes are usually onlydelivered completely mounted on a base plate and aretherefore very expensive. 12.0 x 8.9 x 5.9 mm

For theft protection of the 2-way zipper.Prevents unauthorized opening of the tank bag. Our tank bags have eyelets on the zipper, allowing you to perfectly attach the lock.

With the help of the plastic-coated wire rope, the tank bagcan be securely connected to the bike to prevent theft.

The Dual Injector offers several advantages, as the Scorpion Dual Injector is mounted using a flexible multi-dispenser plate and can thus be individually adhered to all swingarm shapes. Optionally, the injector can also be directly screwed onto chain guides, swingarms, and much more. The robust and shock-absorbing plastic reinforcement around both nozzles inevitably directs every drop of oil to the chain / sprocket. Additionally, the precise dosing extends the refill intervals.The double nozzle can be retrofitted to any already installed system.- optimal lubrication on both sides of the chain- saves oil and increases wear protection- easy and flexible installation- perfect fit for the new multi-dispenser plate- optimally adjustable through individual, detachable sections- compatible with all Scottoiler systems

JMP Flasher Relay   Number of Poles: 3-Pole Flat Connector   Operating Mode: Electronic   Nominal Voltage: 12 Volts   Switching Power: 2 - 4 x 21 Watts + 0 - 4 Watts   Connections: 31 = Ground 49 = Battery 49A = Switch   Blinking Frequency: 85 per Minute    

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

TOURATECH Fernreisefußrasten * Works *, low, for BMW R850GS, R1100GS, R1150GS, R1150GS Adventure, R1200GS + Adventure by 2012, R80GS, R100GS, F800GS, F700GS, F650GS (TWIN), F650GS, F650GS Dakar, G650GS, G650GS Sertao item Description  Touratech WORKS steel footrests. The best that Touratech has your boots to offer. Specially developed team according to the requirements of the Touratech works racing. The 52mm wide boots gentle 4mm thick stainless steel claw profile, with its special form the optimal combination of grip and self-cleaning. Due to the rounded edges the boot soles are not damaged, the open design ensures that mud and stones fall under the boots of the footrests and the boot profile has a secure hold on the catch. The slim design and taper to the outside of the ground clearance increased, which are especially when driving through deep ruts a great advantage compared to regular Enduro footrests or series products bietet.Die footrests 20 mm lower than the original notches (without rubber insert).  The Touratech Works foot pegs have been specially strengthened at the reception and are thus significantly less susceptible to impacts. Even the look of the Works products are a highlight. Blasted stainless steel with a special laser inscription records this product and shows visually the noble origins in extreme enduro Sport.- 52mm wide boots gentle 4mm thick stainless steel Krallenprofil- optimum combination of grip and Selbstreinigung- increased ground clearance by sleeker design significantly more resistant to Aufschläge- increased recording, finished with blasted surface and laser inscription Including car-specific reports according to § 19 STVZO.BMW F800GS: all years!

The squeegee is ideal for applying stickers and films without scratching.Due to its soft material, you can apply pressure optimally on curves for secure fixing,ensuring a long durability of the stickers/film.

Pin for Footpeg    Stainless Steel   Dimensions: - Total Length: 37mm - Head Diameter: 11mm - Bottom Diameter: 8mm  

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and runout accuracy are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   300 mmInner Diameter:   105 mmBolt Circle:   120 mmNumber of Holes:   6 Hole Diameter:   6.5 mmThickness:   5 mmDesign:   fixed Manufacturer:   Brembo

Gabeldichtring-Satz mit Staubkappe Tourmax   Made in Japan

Cable only suitable for connection to a car ZA socket. "Voltage converter" plug cannot be cut off!!Note: For devices with a power consumption > 2 Amperes.

Stabile Aluminiumplatte zur Verbreiterung auf nahezu allen Gepäckbrückenmit gerader Auflagefläche, wenn kein Topcase, sondern loses Gepäck transportiert werden soll. Durch die hochgezogenen Kanten und die zusätzlichen Haltepunkte ist die Verbreiterung ideal zum sicheren Transport auch größerer Gepäckrollen, Reisetaschen, Zelte, Seesäcke etc. geeignet.Konstruktion aus Aluminium mit hoher Festigkeit und hochwertiger OptikBefestigungsmöglichkeiten für GurteNicht geeignet zur Topcasemontageinkl. Montagematerial und Anleitunghochwertige KunststoffbeschichtungEmpfohlene Zuladung: 5kg (Bitte beachten Sie die modellspezifischen Hinweise, sowie die motorradherstellerspezifischen Herstellerangaben. Schweres Gepäck sollte generell nicht auf dem Heck, sondern in den Seitenkoffern oder dem Tankrucksack transportiert werden.

optionaler Gepäckhaken für den GOBI SeitenkofferLieferumfang: 1 Stück inkl. Schraubenwird mit dem Deckel verschraubt

Standfest. Stabil. Einfach zu bedienen. Die Hauptständer von Hepco&Becker schränken die Schräglagenfreiheit beim Fahren meist nicht ein und sind extrem robust. Dank ausgefeilter Geometrie und rutschfester Trittfläche ist es ganz einfach in jeder Situation das Motorrad sicher abzustellen.Die präzise gefertigten Ständer sind sehr stabil, sandgetrahlt, grundiert und schwarz pulverbeschichtet und daher wetter- und wertbeständig. Hauptständer vereinfachen Wartungsarbeiten und sorgen für einen sicheren Stand, z.B. beim Tanken. Beim Überwintern entlasten sie die Federelemente und das Hinterrad.ABE wird mitgeliefertmeist keine Einschränkung der Schräglagenfreiheithochwertiges OberflächenfinishLieferumfang: Hauptständer+ Montagematerial + Anleitungbitte beachten Sie die hinterlegte AnbauanleitungHilfreiches Werkzeug zum Einhängen der Zugfeder: Artikelnummer: 700030

Robust 1.5mm aluminum shell material Thick aluminum edge and bottom profiles provide additional stability Absolutely waterproof due to foamed special seal Top-loader, carrying handles in the lid area, lid with stainless steel hinges<br> Sturdy metal locks including keys and locking cylinder (keyed alike to existing cases possible. Please enter in the comment field during the ordering process) Includes screwed-on metal railing Includes lock adapter to attach the case to Hepco&Becker side case carriers Extensive accessories available 35-liter case not suitable for a helmet Fits most Hepco&Becker side case carriers (Please note the motorcycle-specific information for the respective carriers) Recommended load: 10kg per side case (Please note the motorcycle-specific information on the carrier as well as the motorcycle manufacturer's specific information)    

Hepco & Becker aluminum drinking bottle with screw cap (0.7L)

Specific backrest for your Hepco & Becker Topcase. The ideal addition for riding with a passenger. The backrest should be a constant companion on every trip with a passenger. The backrest is easily attached to the Topcase. To do this, holes need to be drilled into the Topcase. But don't worry, the installation is simple.The Topcase is 100% waterproof again after the backrest is installed. The backrest is custom-made for each Topcase from black PU material, ensuring a perfect fit and shape.