Touratech WORKS stainless steel footpegs. The best that Touratech has to offer for your boots. Specifically developed according to the requirements of the Touratech Works Racing Team. The 52 x 90 mm wide, boot-friendly, 4mm thick stainless steel claw profile provides the optimal combination of grip and self-cleaning with its special shape. Due to the rounded edges, the soles of the boots are not damaged, and the open design ensures that mud and stones fall away from under the boots through the footpegs, allowing for a secure grip on the peg. The slim design and the bevel towards the outside increase ground clearance, which offers a significant advantage when navigating deep ruts compared to regular enduro footpegs or standard products.The Touratech Works footpegs have been specifically reinforced at the mounting point, making them significantly more resistant to impacts. Visually, the Works products are also a highlight. Shot-blasted stainless steel with a special laser engraving distinguishes this product and visually showcases its noble origin from extreme enduro sports.- 52mm wide boot-friendly 4mm thick stainless steel claw profile- optimal combination of grip and self-cleaning- increased ground clearance due to slimmer design- significantly more resistant to impacts- reinforced mounting- refined with a shot-blasted surface and laser engravingIncludes ABE.BMW F800GS: for all model years!

The perfect solution for more luggage on the passenger seat!With two outer pockets, a large main compartment, the elastic drawstring on the lid, the expansion option via a full-length zipper, and the practical carrying handle, this passenger bag is ready for any requirement!It visually matches perfectly with our other luggage solutions from the Ibarra series and is easily attached with two easy-to-open zippers to the vehicle-specific base plate. With a water-repellent cable entry into the interior, charging electronic devices is no longer a problem. Made from high-quality Cordura with YKK brand zippers!Dimensions: (L x W x H) approx. 33 x 30 x 20/32 cm; Volume: approx. 17/22 liters.

These progressive fork springs are perfectly tailored to the requirements of the fork for the BMW F650GS. They provide the fork with better tuning for the demands of motorcycle touring. Additionally, you will experience a significantly improved response and higher reserves in the limit range. The fork springs are manufactured in Europe by the Dutch suspension specialist Hyperpro.Info: Fits only for * BMW F650GS *2000-2007* *For all suspension solutions, the rear and front areas of the motorcycle should be adjusted.=> Touratech Suspension Replacement Spring Set for BMW F650GS *2000-2007* 01-040-7436-0=> When replacing only one component, optimal handling is not achieved.Delivery includes: detailed installation instructions, the appropriate fork oil, and a paste to improve the glide properties of the fork tubes.

This visually appealing and functional cover is easily screwed onto existing mounting points. This makes it much more difficult for anyone to remove the cap of the brake fluid reservoir. The level of the reservoir remains clearly visible.Made from laser-cut stainless steel.Tip: also suitable for Ducati Multistrada 1200 (-2014) and Desert X

Viva la Evolution!Continuous EVOLUTION - under this motto, we have further developed our ZEGA luggage systems, and thus the name of our latest aluminum case was quickly established: the ZEGA Evo combines the proven robustness of tens of thousands with extra comfortable handling - not least thanks to a completely new mounting system.Practical benefits and user-friendliness:The ZEGA Evo offers even easier hanging than the ZEGA Pro2 while maintaining absolute stability - even in tough off-road use! It combines optimal ergonomics and absolute comfort without compromising reliability.In the new lid closures, we have retained the popular hinge function. The lid can be opened from both sides or completely removed. The lid and the bottom of the case are manufactured using modern deep-drawing technology, eliminating unsightly weld seams.The stable connection between the housing and the bottom is ensured by high-quality, waterproof special rivets. The lid features a groove-spring profile with an integrated silicone seal that guarantees a waterproof closure. Thanks to the newly developed ventilation, the case is pressure-relieved during altitude changes. This means you can open a case closed in the valley even on the highest mountain pass. Like its predecessor, the ZEGA Evo is made from established, 1.5 mm thick aluminum.The ZEGA Evo already comes equipped with practical accessory mounting pins. This allows you to easily attach the special ZEGA Evo accessory holders without drilling holes in your new case. As with the previous versions, the proven tie-down eyes are standardly installed on the lid to securely attach special luggage lid bags or other items to your ZEGA Evo. The case is easy to transport thanks to the carrying handle.Whether silver or black anodized, the new ZEGA Evo once again sets the standard for high-quality luggage solutions in terms of design. The rounded, newly designed plastic corners are not just decorative elements. In the event of an accident, they protect both the case and the rider from injuries.Newly developed mounting system:The core element of the ZEGA Evo is a completely newly developed and constructed mounting system on the luggage rack that combines easy handling with stable hold. The case remains securely attached to the motorcycle even under very high forces. The operation for hanging is super simple, the locking mechanism is equipped with a safety lock even without a key, and handling is easy even with the thickest gloves. Simply slide the hooks onto the rack and press the tension lever down until it clicks into place. The case can be additionally secured against theft with a lock on the rack. To remove it, simply pull the tension lever and lift the case off the rack. The mechanics work even under demanding conditions such as dirt, sand, mud, etc.The case as part of the luggage system:The ZEGA Evo, like all cases from Touratech before it, was not developed as an isolated product but is intended from the outset as part of a luggage system. The outstanding practical benefits are the result of the unique combination of a beautifully designed yet indestructible case, a brilliant mounting mechanism, and a rugged rack made of 18 mm thick stainless steel tubes. Matching inner bags and practical accessory holders complete the luggage system. Order them together! (Not included in the delivery.)- Newly designed plastic corners - protect the rider and case in the event of an accident- Proven mounting pins - for ZEGA Evo accessory holders- Proven handle - for comfortable carrying- Newly developed mounting system - for easy hanging and stable hold on the luggage rack- Newly developed lockable one-hand locking mechanism - for comfortable and secure fixation on the luggage rack- Newly developed lockable lid closure - for comfortable, two-sided opening and closing thanks to practical hinge function- Proven silicone seal - for dryness in the case even in pouring rain- Proven tie-down eyes - for secure attachment of luggage lid bags and other soft luggage- Standard hooks on the inside of the lid - for attaching accessories (bags, nets)ZEGA Evo "And-Black" Aluminum Case 31 Liters, left- Case for mounting on the left side of the vehicle.- Dimensions: 443 mm x 203 mm x 393 mmPlease refer to the item usage list for your vehicle!Order together: ZEGA Evo lock set 01-050-6000-0 (Not included in the delivery.)

The touring screen is generally longer, and sometimes wider than the original screen, to better protect the rider from wind and weather. Depending on the angle of the screen, the rear edge of the screen is also tilted upwards as a wind deflector across its entire width on some models. This makes riding more comfortable even on longer trips.

TRAX ADV Alukoffer-SystemTESTSIEGER in der Zeitschrift MOTORRAD Heft 05/2020. Testurteil: SEHR GUTDie robusten TRAX ADV Alukoffer fühlen sich auf jeder Strecke zuhause: Designprägungen unterstützen die Stabilität des 1,5 Millimeter starken, geschweißten Aluminium-Wandmaterials. Ein komplett abnehmbarer Deckel mit Tragegriffen aus eloxiertem Aluminium und Schnellverschlüssen erleichtert Be- und Entladen der Motorradkoffer, die abgeschrägte Seitenkante gibt hohe Bodenfreiheit bei der Kurvenfahrt. Mit dieser Komplettlösung hast du alle benötigten Komponenten, um direkt mit TRAX auf große Reise zu gehen: Zwei wasserdichte TRAX ADV Seitenkoffer, zwei abnehmbare SW-MOTECH Seitenträger, Adapterkit, Schloss-Satz, Öffnungsbegrenzer und Diebstahlsicherung zum attraktiven Gesamtpreis. Die modellspezifischen Träger und die Größe der Koffer sind perfekt auf Heckgeometrie und Auspuffanlage des Motorrades abgestimmt.Ein Motorradkoffer ohne Kompromisse: Bei der Entwicklung des TRAX ADV standen Stabilität und Dichtigkeit gegenüber Staub und Wasser genauso im Fokus wie einfaches Handling. Egal ob Off-Road-Abenteuer, Fernweh-Tour oder Kurzstrecke, die Premium-Alukoffer mit einer Wandstärke von 1,5 Millimetern überzeugen bei jeder Herausforderung.Lieferumfang1 x TRAX ADV M Alukoffer, 37,00 l, links, silbern1 x TRAX ADV M Alukoffer, 37,00 l, rechts, silbern2 x EVO Seitenträger2 x Adapterkit für EVO Seitenträger1 x TRAX Schloss-Satz mit EVO Diebstahlsicherung1 x Multitool Schlüsselanhänger4 x Öffnungsbegrenzer2 x AufbewahrungstascheMontagematerialDetailsMaterial: AluminiumFarbe: silbernGesamtgewicht: ca. 18,8 kgGesamtvolumen: 74,0 l

The tank bag cable is equipped on the vehicle side with a compact DIN angled plug and on the tank bag side with a USB twin charger (USB-A and USB-C). The tank bag cable is ideal for plugging into the standard onboard sockets of BMW, Triumph, and Ducati, or into a small retrofitted DIN onboard socket (SD14/22). It allows for easy charging of USB devices such as mobile phones, cameras, or other electrical consumers simply by placing them in the tank bag. – Compact DIN angled plug – USB-A and USB-C socket each 3.6A – No vehicle installation required – Power consumption only when the plug is inserted – 1.5 m cable

This touring screen features a spoiler at the end that can be manually adjusted to the desired position in seven stages. The airflow behind the spoiler reduces wind pressure on the rider while simultaneously minimizing turbulence. The Vario touring screen is available in clear and smoke gray.

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: black with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

Tool for BMW Motorcycles RoadTech B1 Item Description:  The perfect tool set for your BMW, made in CruzTools.BMW motorcycles are known for innovation, which also affects the type of screws used. The "female" Torx screws are becoming increasingly commonplace, whereas "male" Torx screws are still the exception. So you need a BMW to normal and special tools. Summing up these requirements together, it becomes clear that a unique tool set is essential! All meets these criteria, the RoadTech-B1 Werkzeugzeugset for BMW motorcycles from Cruz Tools. It includes high-quality tools and many other useful things in a robust roll-up case.  Contents: - Ring mouth key: 8mm, 10mm, 12mm, 13mm- wrench Six round: E10, E 12 infinitely adjustable crescent wrench 20.5cm length-locking pliers 14cm length-Mini-ratchet set 0.64 cm (1.4 " ) 5,08cm with extension (2 ") and 8mm, 10mm, 13mm, E8 Six round-Nüssen- Allen key: 3mm, 4m, 5mm, 6mm, 8mm - Special-22/19 mm-Achsadapter- hexagon round key: T20, T25 , T30, T40, T45, T50 screwdriver: 6-in-1 (2x cross, 2x slot 6mm and 8mm nut) - air pressure Gauge (kPa-scale -> 100 kPa = 1 bar!) - Other: screw lock, oil, cable ties

Adapter for connecting devices with a cigarette lighter plug to a motorcycle with a on-board network socket.

Unsere neuen Zubehörhalter sind sepziell für die ZEGA Evo Alukoffer entwickelt worden. Innovative Lösungen und Verbesserungen im Detail sind auch hier Bestandteil der neuen Serie.Zubehörhalter: Kanisterhalter mit Ölkanister Touratech 2 LiterZEGA Evo Zubehörhalter lassen sich in Sekunden am Koffer befestigen. Es werden die serienmäßigen Aufnahmepunkte des ZEGA Evo Alukoffers genutzt. Durch Schließen der Kofferverriegelung wird der Zubehörhalter automatisch gesichert. Die Ausrüstung kann dauerhaft am Halter verbleiben. Alle ZEGA Evo Zubehörhalter werden mit Kunststoffelementen zum Riemenschutz geliefert.Der Erweiterung des Gepäckraums steht mit den Touratech Zubehörhaltern ZEGA Evo nichts mehr im Weg. Je nach Bedarf austauschbar, haben Sie immer die richtige Ausrüstung dabei.- inklusive 2 Spanngurten- inklusive Ölkanister- ohne KofferTipp:Anbringung mit dem Touratech-Logo nach außen

The 2-liter oil canister, with an integrated filling tube and vent, offers the ability to safely transport necessary liquids. Included in the delivery:- 2-liter canister (with integrated filling tube and vent)- ZEGA Pro/ZEGA Mundo accessory holder "Canister Holder" 2 liters with plastic elements for strap protection- 2 tension strapsTip:Mounting with the Touratech logo facing outward

ZEGA Pro2 Zubehörhalter lassen sich in Sekunden am Koffer befestigen. Es werden die serienmäßigen Aufnahmepunkte des vormontierten ZEGA Pro2 Alukoffers genutzt. Durch Schließen der Kofferverriegelung wird der Zubehörhalter automatisch gesichert. Ein Drucktaster ist damit überflüssig, die Ausrüstung kann dauerhaft am Halter verbleiben. Alle ZEGA Pro2 Zubehörhalter werden mit Kunststoffelementen zum Riemenschutz geliefert.Der 2 Liter Ölkanister, mit integriertem Einfüllrohr und Entlüftung, bietet die Möglichkeit benötigte Flüssigkeiten sicher zu transportieren. Im Lieferumfang enthalten:- Kanister 2 Liter (mit integriertem Einfüllrohr und Entlüftung)- ZEGA Pro2 Zubehörhalter "Kanisterhalter" 2 Liter mit Kunststoffelementen zum Riemenschutz- 2 SpanngurteTipp:Anbringung mit dem Touratech-Logo nach außen