Infinitely adjustable folding mirror in length and angle, universally suitable for most motorcycle models.- Suitable for left and right- With ECE approval mark!Scope of delivery: - 1 mirror- Mounting adapter:1x M8 x 1.25 with right-hand thread1x M8 x 1.25 with left-hand thread1x M10 x 1.25 with right-hand thread1x M10 x 1.25 with left-hand threadFor BMW R1200GS/ R1200GS Adventure/F850GS/ F750GS/ F800GS/ F700GS/ F650GS(Twin)/ HP2/ R1250GS/ R1250GS Adventure and Triumph Tiger 1050, the adapter M10x1.5 (01-040-0761-0) is required!

BATTLAX-BT-46TOURING MOTORCYCLE TIRE   Further development of a legend with modern technology Improvements in all areas - even on wet roads Even wear  Technical Data:Width:   100 Aspect Ratio:   90 % of widthConstruction:   - (Bias tire) Rim Diameter:   19 inchesLoad Index:   57 Speed Index:   V -240 km/h Profile:   BT46 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

BATTLAX-BT-46TOURING MOTORCYCLE TIRE   Further development of a legend with modern technology Improvements in all areas - even on wet roads Even wear  Technical Data:Width:   130 Aspect Ratio:   80 % of widthConstruction:   - (Bias tire) Rim Diameter:   17 inchesLoad Index:   65 Speed Index:   H -210 km/h Profile:   BT46 Manufacturer:   Bridgestone Whitewall:   No Tube Type:   TL Reinforced:   No Tire Type:   Summer tire

To be placed on the Rack-Pack, Travel-Zip, or as side bags. These bags allow you to store small items that would otherwise get lost in the vastness of large packing bags. They are also useful for keeping the first aid kit readily accessible. The clever attachment allows the bag to be quickly removed without tools.Best visibility and thus safety!Due to its exposed position, the neon yellow Cordura bag is visible from all sides, providing additional safety. It is never obscured by the rider, and woven reflective threads bounce back any incoming light strikingly at night.Material: PU-coated CORDURA®, dustproof and waterproof (IP64)Size: SColor: neon yellowCapacity: 2.0 litersWeight: 105 g

Machined aluminum body, shock absorber adjustable in preload and rebound (30 clicks). The locking of the preload is done via a set screw.   The adjustment tool is included in the delivery.  

With the AirMan Tour compressor, you can inflate motorcycle and bicycle tires.In addition to its practical, portable, and lightweight design, its high-performance air compressor allows for quick tire inflation.Features:- 12V standard plug for the cigarette lighter- Integrated tire pressure gauge in psi and bar- Adapter for bicycle tires, balls, and other inflatable items- Fabric bag for storage- With a 3.40 m long cable- Maximum pressure 5 barCompressor dimensions (HxWxD): approx. 152 x 120 x 60 mmPerformance examples:4.0 bar in 1 minute (e.g., bicycle tire)2.5 bar in 4 minutes (e.g., motorcycle, tire volume approx. 15 liters)2.5 bar in 6.5 minutes (e.g., small car, tire volume approx. 25 liters)2.5 bar in 8.5 minutes (e.g., mid-size car, tire volume approx. 36 liters)

For connection to cigarette lighter and standard sockets (e.g. BMW on-board network) via the 12 V on-board network of cars, trucks, buses, caravans, and boats for charging and operating devices such as mobile phones, smartphones, navigation devices, MP3 players, cameras, and all types of tablets that require a high charging current.- Connection: 1 x USB-C- with blue control LED for voltage indication- Protection against: reverse polarity, overload, overheating, overvoltage, short circuit

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

Original BMW Spare Part Badge Emblem Logo D=45 mm BMW Full Fairing for example R90S Topcase F650GS... Additional Information The part with the BMW part number 52 53 2 325 201 is used on the following vehicles:

Original BMW Spare Part Additional Information The part with the BMW part number 51 14 8 164 924 is used on the following vehicles:

JMP Battery Charger Skan 1.0   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 6/12 V 1 Afor batteries from 2 Ah to 40 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 180 x 80 x 40 mmWeight: 0.5 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 1.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery                     

JMP Battery Charger Skan 4.0 CAN-Bus   Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging stages. Suitable for both quick charging of a battery and long-term maintenance charging, e.g., during vehicle winter storage.   Suitable for: Standard Lead AcidGelAGMEFBLithium (LiFePO4)   Technical Data: 12 V /1 - 4 Afor batteries from 4 Ah to 120 AhLow voltage detection: 0.7 VOvercharge protection, reverse polarity protectionSplash and dust proof (IP65)Dimensions: 190 x 80 x 50 mmWeight: 0.75 kgPower cable: 2 mConnection cable: 2.10 m   Scope of delivery: 1x JMP Skan 4.01x Adapter cable with clamps1x Adapter cable with ring terminals for permanent connection to the battery1x Adapter cable for onboard socket (CAN-Bus)            

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: blue with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

Bleed ScrewTechnical Data:Thread: M10 x 1.00 Length: single Color: gold with Bleed Valve: Yes with Brake Light Switch: No Material: Titanium Manufacturer: Probolt

BMC Replacement Air Filter   The acquired know-how from the racetracks is directly incorporated into the production of the series filters, to provide the demanding motorcyclist with a product that is tested, delivers performance, and is in a constant state of evolution.   The materials used are the best currently available on the market. The filters are made from a single rubber frame to prevent any breakage. The filtering element is made from a special cotton fabric (4 layers), soaked in a low-tack oil.   It is encased in an aluminum mesh that is treated with an epoxy solution to be resistant to gasoline vapors and oxidation. Additionally, the cotton has the advantage of being washable and reusable.   Due to these features, the BMC sport air filters (replacement air filters) guarantee a higher airflow compared to the original paper filters, a minimal pressure loss of the incoming air, and thus lead to better engine performance.   - Durability: washable and reusable, no replacement needed - Wider filter surface - Maximum air permeability (4 layers of cotton) - Higher absorption and filtration - Better pressure drop ratio - Tested by international testing procedures

BMW F 650 GS + Dakar CS G650GS Clutch Cable Clutch Cable 32737661757 Original BMW spare part. Fits according to BMW part number in the following vehicles: F 650 GS F 650 GS Dakar F 650 CS G 650 GS Price = including shipping within Germany!

BMW Original Spare Part Air Filter Insert Top Brand Quality

BMW original Ersatzteil Öldruckschalter Top Markenqualität Passt an folgende Fahrzeuge: F 650 F 650 ST F 650 GS F 650 GS Dakar

Mahle Air Filter   Clean intake air - one of the most important prerequisites for optimal engine performance, high torque, low fuel consumption, and the minimization of pollutant emissions.   With MAHLE air filters, dust, soot, and tire wear are filtered out by up to 99.9 percent. At the same time, an optimal air/fuel mixture is ensured. The high particle retention capacity guarantees long service intervals - even under extreme conditions such as heat, cold, or chemical influences.   Mahle quality filters prevent premature wear on valves, cylinder running surfaces, piston rings, plain bearings, and other engine components. To ensure consistently flawless filter performance, all filters should be replaced according to the intervals specified by the motorcycle manufacturers.

Original BMW Spare Part The brakes of your motorcycle are the most important component when it comes to safety. Therefore, they must always be in perfect working order. After all, it can sometimes come down to millimeters and milliseconds. We recommend using original BMW brake pads on the original brake discs. BMW has coordinated the materials of the brake disc and brake pad to ensure optimal braking performance with minimal wear. Additionally, the fastening parts on the brake calipers should be replaced regularly. They are also subject to wear. Only when everything in the braking system is free can it operate optimally!

Tapered Roller Bearing Set Koyo Manufactured by one of the leading Japanese bearing manufacturers (Koyo). Global original equipment manufacturer, high quality, 100% Made in Japan. - Without dust seal Dimensions of the bearings:- Upper bearing: 52X28X16- Lower bearing: 52X28X16Technical Data:Type:   Tapered Roller Bearing Manufacturer:   Koyo Outer Diameter:   52 mmInner Diameter:   28 mmHeight:   16 mmOuter Diameter:   52 mmInner Diameter:   28 mmHeight:   16 mm

Whether you spend most of your time off-road, on country roads, or in the city, a crash bar from Hepco&Becker is always the right choice. Your motorcycle is effectively protected against unexpected mishaps at all times.More than that: In the event of a fall or unintended ground contact, you can protect the motorcycle and the rider from greater damage.The protection bars from Hepco&Becker perfectly follow the lines of the machine, giving the motorcycle an individual character. Made from an extremely stable tube-in-tube construction, with some new models featuring an integrated crash pad.Depending on the vehicle model, various surface finishes are available. protects against falls and crashes helpful for securing the motorcycle high-quality metal coating solid construction, manufactured MADE IN GERMANY in our factory in Pirmasens comprehensive and easy-to-understand installation instructions Scope of delivery: right + left including mounting materials and instructions any restrictions or notes can be found in the provided installation instructions or the vehicle-specific notes no ABE or registration required

The permanently bolted side case carriers from Hepco&Becker for hard-shell cases are securely connected to the motorcycle frame. All standard hard-shell cases from Hepco&Becker fit onto these carriers. The cases are attached to the carrier using a quick-release mechanism (metal locking mechanism). Additionally, an aluminum adapter is required, which is usually included with the case. (Item number: 700114) This aluminum adapter is bolted to the rear right and left of the carrier and provides the mount for the case locking mechanism.The model-specific carriers are solidly designed and provide effective protection for the legs of the rider or passenger in the event of a fall.The side case carriers from Hepco&Becker can usually be combined without issues with our rear carriers. Please refer to the installation instructions and model-specific notes. Construction from steel tubing MADE IN GERMANY Permanently bolted to the motorcycle frame Compatible with most Hepco&Becker hard-shell side cases (please note model-specific information for any potential restrictions) Indicators usually remain in their original position but may sometimes need to be repositioned to ensure a certain beam angle (please refer to the installation instructions for the product) Recommended load: 10kg in each side case (please note model-specific information from the motorcycle manufacturers or instructions in the installation manual) Scope of delivery: right + left including mounting materials and instructions Luggage systems generally do not require ABE or registration Vehicle-specific notes: Side case recommendations: Junior 30, Alu-Exclusiv 30, Alu-Standard 35, Xplorer 30.

BMW F 650 GS F650GS G650GS G 650 GS Luggage rack silver The facts in pipe construction: • highest safety - especially developed for Hepco & Becker developed top case • Vehicle Development • Robust and elegant design • Precision fit, easy installation • Rotating attachment for luggage straps • metal pipe from a German steel forge • High-quality metal coating • Comprehensive, easy-to-understand AnbauleitungNur for Hepco & Becker top boxes, not suitable for hand luggage! Vehicle-specific information: The luggage rack is mounted on the original bridge. ( Example Picture)