The Cambelt cover vertical cylinder with matt surface for the Ducati Diavel 1260 MY2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon air intake fairing for the Ducati Multistrada 1200 replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part has been manufactured according to the latest guidelines in an autoclave completely from prepreg (see FAQ) material and, as is customary with us, has been coated with a clear plastic layer in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly. The fabric structure of the offered parts visually matches very well with the parts originally offered by Ducati.

The carbon chain guard for the Suzuki GSX R 1000 from 2017 replaces the original component using the original mounting points.The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness. The carbon part has been completely manufactured from prepreg material (see FAQ) according to the latest guidelines in an autoclave and, as is customary for us, coated with a clear plastic layer in the next step to protect against environmental influences.This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The left cover on the frame tail in carbon with a glossy finish for the Ducati Panigale V4 / V4 S from model year 2018 replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness. The carbon part has been completely manufactured in the autoclave from prepreg material (see FAQ) according to the latest guidelines and, as is customary for us, coated with a clear plastic layer in the next step to protect against environmental influences.This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The front fender in carbon for the Ducati Streetfighter replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness. The carbon part has been completely manufactured from prepreg material (see FAQ) in an autoclave according to the latest guidelines and, as is customary with us, has been coated with a clear plastic layer in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

This product replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original component) and increased stiffness. The carbon part has been completely manufactured from prepreg material (see FAQ) in an autoclave according to the latest guidelines and, as is customary with us, coated with a clear plastic layer in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The carbon engine cover for the Ducati 1199 Panigale is delivered with a matte finish, seamlessly integrating into the overall look of the original Ducati and Ducati Performance parts. The carbon engine cover for the Ducati 1199 Panigale replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part is manufactured entirely from prepreg material (see FAQ) according to the latest guidelines in an autoclave, and in the next step, as is customary for us, it is coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The carbon engine spoiler for the Aprilia Tuono V4 models integrates perfectly into the design of the Tuono V4. The delivery includes the complete 3-piece carbon engine spoiler from Ilmberger Carbonparts, which also includes the two side carbon parts for connecting to the original water cooler fairings. Additionally, the unsightly exhaust collector, which can become unattractive over time, is covered by the use of the engine spoiler. The kit is delivered in a standard glossy finish. For an additional charge of 10%, the part can also be delivered completely in a matte finish with the same UV protection.

The passenger seat cover in carbon for the Ducati Monster replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness. The carbon part has been completely manufactured from prepreg material (see FAQ) according to the latest guidelines in an autoclave and, as is customary with us, has been coated with a clear plastic layer in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly. - You can find a 360-degree video of the passenger seat cover for the Ducati Monster 696 cc to 1100 cc under the Product Videos tab above the product description. -

This carbon rear wheel cover for the Ducati Monster S2R/S4R enhances the vehicle and provides additional protection against damage. The special design of the rear wheel cover significantly reduces the contamination of the motorcycle from the rear wheel. The specific shape of the cover is model-specific, ensuring compatibility with standard chassis or tire variants. The carbon part has been completely manufactured from prepreg material (see FAQ) in an autoclave according to the latest guidelines and, as is customary with us, coated with a clear plastic layer for protection against environmental influences. This plastic coating surpasses the usual clear lacquer finish in terms of protective effect, scratch resistance, and durability. Not only does the coating excel technically, but it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The carbon rear wheel cover for the Ducati 1199 Panigale is delivered with a matte finish, seamlessly integrating into the overall look of the original Ducati and Ducati Performance parts. The carbon rear fender for the Ducati 1199 Panigale replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part has been completely manufactured in an autoclave according to the latest guidelines from Prepreg (see FAQ) material and, as is customary with us, has been coated with a clear plastic layer for protection against environmental influences. This plastic coating significantly surpasses the usual clear coat in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The rear fender in carbon for the Ducati Streetfighter replaces the original component using the original mounting points. The focus is on weight savings (typically a reduction of about 70% compared to the original part) and increased stiffness. The carbon part has been completely manufactured in the autoclave from prepreg material (see FAQ) according to the latest guidelines and, as is customary with us, has been coated with a clear plastic layer in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The carbon rear wheel cover for the Suzuki GSX R 1000 K5/K6 replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part has been completely manufactured from prepreg material (see FAQ) in an autoclave according to the latest guidelines and, as is customary with us, has been coated with a clear plastic layer for protection against environmental influences in the next step. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

The lower tail section cover in carbon for the Ducati Streetfighter replaces the original component using the original mounting points. The focus is on weight savings (typically around 70% savings compared to the original part) and increased stiffness. The carbon part has been completely manufactured from prepreg material (see FAQ) in an autoclave according to the latest guidelines and, as is customary with us, has been coated with a clear plastic layer in the next step to protect against environmental influences. This plastic coating significantly outperforms the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability. But not only does the coating excel technically, it also emphasizes the three-dimensional effect of the carbon structure even more clearly.

With the carbon heel guard, the love for detail can be expressed in a particularly special way. The carbon part replaces the original component using the original mounting points. The combination of elegant curves and sharp edges allows the carbon exhaust heat shield to fit seamlessly into the modern lines of the new Aprilia like no other. To achieve a particularly harmonious overall appearance, the fiber layers are laid and aligned by experts into the mold. This way, the carbon part perfectly conforms to the surrounding shapes of the motorcycle. The more of our parts are installed and combined, the more overwhelming the result. For our carbon, we exclusively use prepreg fabric produced specifically for this purpose, which is also used in a similar form in Formula 1 and aerospace. The material, laminated by hand with great care and cured in multiple stages in an autoclave, not only impresses with its unique appearance but also with its exceptional technical properties. It has three times the specific stiffness of steel at the same volume and, due to its particularly low density, weighs only a fraction of it. These properties are particularly pronounced in our products due to the high fiber volume content. To optimally protect this high-quality material from environmental influences of all kinds, we, as the only carbon manufacturer worldwide, use a specially developed plastic coating on all surfaces. This, in combination with our clear coat, provides an unprecedented and unique depth effect that highlights the high quality of the material. So that not only riding but also working on the bike is a pleasure, we use only the original mounting points for this part.   The facts:   - With General Operating Permit (ABE) - Sealing of all surfaces (inside and outside) with a unique plastic coating for protection against environmental influences of all kinds - Additional high-gloss clear coat on all visible surfaces - Optimally protected against UV light - Delivered in ready-to-install condition - TÜV certified quality - Made from prepreg material specifically produced for Ilmberger - Manufactured in-house according to ISO 9001 - Installation using the original mounting points - Quick and easy assembly

The chain guard on the swing arm in carbon for the Ducati models 848/1098/1198 covers the dangerous area of the chain at the entry point in front of the back sprocket.  Not only is this carbon part technically meaningful. it also really looks good and completes the look of a super-sport motorcycle in the calibre of the Ducati 848/1098/1198. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The chainguard in carbon for the Triumph Speed Triple is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

In addition to our chain guard (373-5045), we have developed an effective lower protection made from the same aluminum/stainless steel material combination. Especially in off-road conditions, it prevents branches and other objects from knocking the chain off the sprocket.The chain guard fin is sturdier and significantly more attractive than the original plastic part!The installation of the chain guard can be done easily and quickly using the already existing mounting points.

The Touratech chain guard for the Tiger 900. Significantly more stable than the original plastic version, the Touratech chain guard is made of stainless steel and aluminum while still being relatively lightweight. Visually, the metal chain guard fits much better into the overall concept of the vehicle for an adventure bike like the Tiger 900. The installation of the chain guard can be done easily and quickly using existing mounting points.Fits on:- Tiger 900 Rally- Tiger 900 Rally Pro

A core made of nearly indestructible stainless steel supports the cover made of lightweight aluminum. Form and function are no longer a contradiction! The combination of these two materials gives your 1290 that certain something!The Touratech chain guard is significantly more stable than the original plastic part and thus fits better with a large adventure bike like the 1290 Super Adventure.The installation of the chain guard can be done easily and quickly by using existing mounting points.

Our Chain guard on the swing arm for the Ducati Supersport 939 in gloss finish blends into the motorcycle's overall appearance. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Angeboten wird hier ein Neuteil Hersteller: Yamaha Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 2UJ-26331-01 Fahrzeug: 2000VIRAGO 125 (XV125S)1999VIRAGO (XV125S)VIRAGO (XV250S)XV1251998VIRAGO (XV125)XV125VIRAGO (XV250S)1997XV250SXV125VIRAGO (XV250S)1995VIRAGO (XV250)VIRAGO (XV250S)XV250S

Angeboten wird hier ein Neuteil Hersteller: Yamaha Zustand: Neu mit Lagerspuren Beschreibung: wird verkauft wie abgebildet Teilenummer: 31A-26331-00 Fahrzeug: 1989XJ9001987XJ900F1986XJ9001983XJ900

The clutch cover is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.