optional für den Tankschutzbügelsorgt für zusätzliche Stabilität

optional für den Tankschutzbügelsorgt für zusätzliche Stabilität

```html Wasserkühlerabdeckung in Carbon für Triumph Speed Triple Leicht und robust Ersetzt das originale Bauteil Gewichtsersparnis von ca. 70% Höhere Steifigkeit Hochwertige Verarbeitung Gefertigt aus Prepreg-Material im Autoklaven Schutz durch klare Kunststoffbeschichtung Übertrifft herkömmlichen Klarlack in Kratzfestigkeit und Beständigkeit Ästhetische Vorteile Betont die dreidimensionale Carbonstruktur Verleihen Sie Ihrer Triumph Speed Triple ein Upgrade mit dieser hochwertigen Carbonabdeckung! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt. ```

Carbon Bauteil für Motorräder Optimierte Leistung und Design Ersetzt das originale Bauteil mit originalen Befestigungspunkten. Gewichtsersparnis von ca. 70% im Vergleich zum Original. Höhere Steifigkeit für verbesserte Performance. Hochwertige Verarbeitung Gefertigt aus Prepreg-Material im Autoklaven. Kunststoffbeschichtung für überlegenen Schutz und Kratzfestigkeit. Verstärkt die dreidimensionale Wirkung der Carbonstruktur. Erleben Sie die perfekte Kombination aus Technik und Ästhetik! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Carbon Wasserkühlerabdeckung für Ducati XDiavel Sportliche Optik & Schutz Passend für Ducati XDiavel ab 2016 Matte Carbon-Ausführung Gewicht: ca. 40g Perfekte Integration Montage an originalen Haltepunkten Kompatibel mit Ducati Original-Carbonteilen Hochwertige Verarbeitung Gefertigt aus Prepreg-Material im Autoklaven Klarer Kunststoffbeschichtung für Schutz und Kratzfestigkeit Verstärkt die dreidimensionale Carbonstruktur Verleihen Sie Ihrer Ducati XDiavel eine sportliche Note und schützen Sie den Alu-Kühler effektiv mit dieser hochwertigen Carbonabdeckung! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Wasserkühlerverkleidung in Carbon für Honda CB 1000 R Leicht und robust Ersetzt das originale Bauteil Gewichtsersparnis von ca. 70% Höhere Steifigkeit Hochwertige Verarbeitung Gefertigt aus Prepreg-Material im Autoklaven Kunststoffbeschichtung für optimalen Schutz Erhöhte Kratzfestigkeit und Beständigkeit Betont die dreidimensionale Carbonstruktur Kompatibilität Passend für Modelle ab 2008 Verleihen Sie Ihrer Honda CB 1000 R einen sportlichen Look mit dieser hochwertigen Carbonverkleidung! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Wasserpumpenabdeckung in Carbon für Ducati Monster 1200 / 1200 S Optimierte Leistung und Design Passend für Modelle ab 2017 Ersetzt das originale Bauteil unter Verwendung der originalen Befestigungspunkte Vorteile Gewichtsersparnis: Reduziert das Gewicht um ca. 70% im Vergleich zum Originalteil Höhere Steifigkeit: Gefertigt aus Prepreg-Material im Autoklaven Schutz und Beständigkeit: Überzogen mit einer klaren Kunststoffbeschichtung, die Kratzfestigkeit und Schutzwirkung verbessert Ästhetik: Verstärkt die dreidimensionale Wirkung der Carbonstruktur Erleben Sie die perfekte Kombination aus Technik und Design mit unserer Carbon-Wasserpumpenabdeckung für Ihre Ducati Monster. Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Wasserpumpenschutz für Yamaha XT 1200 Z Super Ténéré

Complete the sporty adventure look of your T7 and effectively protect the exposed water pump!The water pump of the Tenere 700 can be quickly damaged by stone impacts or a fall. Continuing your ride is then out of the question. Our water pump guard offers optimal protection in this regard.The protector is made from laser-cut, black anodized aluminum. Specifically designed for the T7, it is lightweight, robust, and incredibly easy to install on existing mounting points.A small part with a big impact!

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The waterpump guard in carbon for the Ducati Monster 1200 / 1200 S from 2017 is a direct replacement for the original component. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

The wind flap on the tanksidecover in carbon for the Ducati Multistrada 1200 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. The fibre structure of the parts offered very well goes with the original parts offered by Ducati.You can find a 360° video of our part in the category product Videos! Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Winglets on a Motorcycle noticeably improve handling. The pressure on the front wheel is increased. the motorcycle is more stable during acceleration and deceleration. To improve all these stats. we made them bigger than original. This gives the bike an extra aggressively look an also enhances the driving.​ In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Winglets on a Motorcycle noticeably improve handling. The pressure on the front wheel is increased. the motorcycle is more stable during acceleration and deceleration. To improve all these stats. we made them bigger than original. This gives the bike an extra aggressively look an also enhances the driving.​ In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Fairings have beend developed in order to protect the driver of the wind and to increase air drag while driving. In order to improve the protection. we developed wind deflectors.n which help the driver to also get his arms behind the fairing while driving.  As an great bonus. there is now also a high quality carbon part in the direct view of the eyes. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The windflap for the front mudguard in carbon for the Triumph Speed Triple is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The windflap for the front fender in carbon for the Triumph Speed Triple is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The windflap on the sidefairing in carbon for the Ducati Multistrada 1200 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. The fibre structure of the parts offered very well goes with the original parts offered by Ducati. 

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The windflap on the sidefairing in carbon for the Ducati Multistrada 1200 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. The fibre structure of the parts offered very well goes with the original parts offered by Ducati. 

The wind flap on the tanksidecover in carbon for the Ducati Multistrada 1200 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. The fibre structure of the parts offered very well goes with the original parts offered by Ducati.You can find a 360° video of our part in the category product Videos! Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

Please have a look on the 360° Video with the both windflaps on the tanksidecover for the Ducati Multistrada 1200 MY 2013/2014. You will find the Video at the button Productvideos above the description. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Please have a look on the 360 ° Video with the wind flaps on the tanksidecover for the Ducati Multistrada 1200 MY 2013/2014. You will find the Video at Productvideos above the description. - This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.