Einfach und innovativ zugleich - der BASIC TankringDieser funktionale Tankring ermöglicht die Befestigung eines Tankrucksacks von Hepco&Becker.Im Lieferumfang enthalten ist ein BASIC Tankring, sowie der Gegenhalter, welcher individuell, je nach Tankform und Lenkereinschlag am Tankrucksack verschraubt werden kann. Den Tankdeckel kann man bei montiertem Tankring ohne Probleme weiterhin öffnen. Generell brauchst du nur diesen Tankring und einen Tankrucksack von H&B und du hast alles, was du benötigst.Jeder modellspezifische Tankring ist beim jeweiligen Motorradmodell in der "Mein Bike" Datenbank hinterlegt. Sollte kein Tankring hinterlegt sein, kann man auch manuell über die Checkliste hier im Shop herausfinden, ob ein Universal-Tankring für das gewünschte Modell verfügbar ist. (Siehe Hauptmenü -> Tankringe BASIC)MERKMALE:absolut sicherer Halt, auch bei hohen Geschwindigkeitenmechanische VerriegelungEinfache Bedienungder Hepco&Becker Tankrucksack wird einfach aufgesetzt und verriegelt dank einer ausgeklügelten Mechanik hörbar auf dem TankringEntriegelung: Der Mechanismus wird durch einen Zurrgurt in Fahrtrichtung vorne am Tankrucksack entriegelt; der Tankrucksack wird einfach abgenommenEinfache, aber wirkungsvolle MechanikEmpfohlene Höchstgeschwindigkeit bei montiertem Tankrucksack: 130 km/h (Bitte beachte die Motorradherstellerangaben, sowie die modellspezifischen Angaben auf der Anleitung oder hier beim ProduktEmpfohlene Zuladung in den Tankrucksack: ca. 3kg Tankrucksacksysteme benötigen in Deutschland keine ABE oder Eintragung in die Papiere.Unterschied zwischen Lock-it und BASIC Tankringen:Die generelle Funktion und Bedienung bleibt gleich. Der Basic Tankring verriegelt im Vergleich zum Lock-it Tankring jedoch nur rein mechanisch. Beim Lock-it Tankring helfen die Magnete bei der Zentrierung. Der Unterschied liegt also rein in den beiden Magnet- bzw. Kunststoffdomen, welche auf dem Tankring aufgeschraubt sind. Der eigentliche modellspezifische "Metallring" ist bei beiden Versionen gleich.Hinweis:Ein Tankrucksack mit Lock-it Gegenhalter kann nicht auf einem BASIC Tankring aufgesetzt werden und umgekehrt. Tankrucksackgegenhalter und Tankring müssen vom selben System sein.

Einfach und innovativ zugleich - der BASIC TankringDieser funktionale Tankring ermöglicht die Befestigung eines Tankrucksacks von Hepco&Becker.Im Lieferumfang enthalten ist ein BASIC Tankring, sowie der Gegenhalter, welcher individuell, je nach Tankform und Lenkereinschlag am Tankrucksack verschraubt werden kann. Den Tankdeckel kann man bei montiertem Tankring ohne Probleme weiterhin öffnen. Generell brauchst du nur diesen Tankring und einen Tankrucksack von H&B und du hast alles, was du benötigst.Jeder modellspezifische Tankring ist beim jeweiligen Motorradmodell in der "Mein Bike" Datenbank hinterlegt. Sollte kein Tankring hinterlegt sein, kann man auch manuell über die Checkliste hier im Shop herausfinden, ob ein Universal-Tankring für das gewünschte Modell verfügbar ist. (Siehe Hauptmenü -> Tankringe BASIC)MERKMALE:absolut sicherer Halt, auch bei hohen Geschwindigkeitenmechanische VerriegelungEinfache Bedienungder Hepco&Becker Tankrucksack wird einfach aufgesetzt und verriegelt dank einer ausgeklügelten Mechanik hörbar auf dem TankringEntriegelung: Der Mechanismus wird durch einen Zurrgurt in Fahrtrichtung vorne am Tankrucksack entriegelt; der Tankrucksack wird einfach abgenommenEinfache, aber wirkungsvolle MechanikEmpfohlene Höchstgeschwindigkeit bei montiertem Tankrucksack: 130 km/h (Bitte beachte die Motorradherstellerangaben, sowie die modellspezifischen Angaben auf der Anleitung oder hier beim ProduktEmpfohlene Zuladung in den Tankrucksack: ca. 3kg Tankrucksacksysteme benötigen in Deutschland keine ABE oder Eintragung in die Papiere.Unterschied zwischen Lock-it und BASIC Tankringen:Die generelle Funktion und Bedienung bleibt gleich. Der Basic Tankring verriegelt im Vergleich zum Lock-it Tankring jedoch nur rein mechanisch. Beim Lock-it Tankring helfen die Magnete bei der Zentrierung. Der Unterschied liegt also rein in den beiden Magnet- bzw. Kunststoffdomen, welche auf dem Tankring aufgeschraubt sind. Der eigentliche modellspezifische "Metallring" ist bei beiden Versionen gleich.Hinweis:Ein Tankrucksack mit Lock-it Gegenhalter kann nicht auf einem BASIC Tankring aufgesetzt werden und umgekehrt. Tankrucksackgegenhalter und Tankring müssen vom selben System sein.

Innenmaße: 29x8 cm (Länge/Durchmesser) Außenmaße: 32x9 cm  Volumen: ca. 1,5 Liter  kann universell am Motorrad montiert werden, idealerweise an der Innenseite eines Seitenkofferträgers um diesen Raum zu nutzen als Befestigungsmaterial liegen Kabelbinder mit bei Schraubpunkte vorhanden, siehe Bildergalerie wasserdichter Drehverschluss perfekt zur Mitnahme von Werkzeug, Warnwesten oder ähnlichen Sachen.

Carbon Rahmenheckabdeckung für Ducati Monster 1200 / 1200 S (ab 2017) Leicht, Stark und Stilvoll Gewichtsersparnis: Reduziert das Gewicht um ca. 70% im Vergleich zum Originalteil. Höhere Steifigkeit: Bietet verbesserte Stabilität und Performance. Hochwertige Fertigung Gefertigt aus Prepreg-Carbon im Autoklaven nach neuesten Standards. Überzogen mit einer klaren Kunststoffbeschichtung für überlegenen Schutz und Kratzfestigkeit. Erleben Sie die beeindruckende dreidimensionale Wirkung der Carbonstruktur und verbessern Sie das Erscheinungsbild Ihrer Ducati Monster. Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

Carbon Hitzeschutz/Auspuffendkappe für Ducati Supersport 939 Perfekte Integration Glänzend lackierte Oberfläche Nahtlose Anpassung an originale Ducati und Ducati Performance Teile Leistungsstarke Vorteile Gewichtsersparnis: Reduziert Gewicht um ca. 70% im Vergleich zum Original Höhere Steifigkeit für verbesserte Performance Hochwertige Verarbeitung Gefertigt aus Prepreg-Material im Autoklaven Klarer Kunststoffüberzug für überlegenen Schutz und Kratzfestigkeit Verstärkt die dreidimensionale Wirkung der Carbonstruktur Optimieren Sie Ihre Ducati mit diesem hochwertigen Carbonteil! Wer sich für ein Carbonteil von Ilmberger entscheidet, weiß: Der Weg bis zum fertigen Produkt ist anspruchsvoll und erfordert höchste Präzision. Einen spannenden Einblick, wie bei Ilmberger Carbon aus Leidenschaft und Know-how jedes einzelne Teil entsteht, finden Sie im ausführlichen Bericht zum Produktionsprozess. Auch die hauseigene Entwicklung steckt voller Innovationen – entdecken Sie, wie viel Herzblut und technische Raffinesse in jedem Ilmberger Carbonteil steckt.

The upper belt cover in carbon for the Buell XB models is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The upper chainguard in carbon for the Aprilia RSV 4 (2009-now) / Tuono V4 (2011-now) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

The upper numberplate holder in Carbon with gloss surface for the Ducati Scrambler 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. Fits for Scrambler 800 Models:  Classic. Desert Sled. Icon. Sixty2

The upper rear light cover in our unique design for the Honda CBR 1000 RR Fireblade 2017 blends into the motorcycle's overall appearance. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The upper tank cover in carbon for the Suzuki GSX R 1000 from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The upper tank cover in carbon for the Triumph Speed Triple is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. PLEASE NOTE: THE PART WILL MAINLY FIT UNTIL MODELYEAR 2016 !!!  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The complete upper Tank Cover in carbonfiber with mattem finish for the Honda CBR 1000 RR-R/SP MY2020 is a direct replacement for the original component. This front fender contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. TÜV Approved Quality

The upper tank cover in Carbon with gloss surface for the Ducati Scrambler 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. Fits for Scrambler 800 Models:  Classic. Desert Sled. Full Throttle. Icon. Sixty2  

The upper tank cover (gloss) for the Ducati Panigale V4 / V4 S is delivered in glossy surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance. The part gives the Panigale V4 an even more agressive look.   This part is a direct replacement for the original component and mounted only on original mounting points. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The upper tank cover (gloss) for the Ducati Panigale V4 / V4 S MY 2022s delivered in glossy surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance. The part gives the Panigale V4 an even more agressive look. Racingpart without ABE   In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - quick and easy assembly

The upper tank cover in Carbon with matt surface for the Ducati Scrambler 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. Fits for Scrambler 800 Models:  Classic. Desert Sled. Full Throttle. Icon. Sixty2  

The upper tank cover (matt) for the Ducati Panigale V4 / V4 S is delivered in matt surface. In this finish. the part matches the original matt carbon parts. offered by Ducati Performance. perfectly. The part gives the V4 an even more agressive look.   This part is a direct replacement for the original component and mounted only on original mounting points. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The upper tank cover matt for the Ducati Panigale V4 / V4 S MY 2022s delivered in matt surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance. The part gives the Panigale V4 an even more agressive look. The matt finished parts fits perfect to the original Ducati Performance Parts. Racingpart without ABE In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The upper tank cover (matt) for the Ducati Panigale V4 R is delivered in matt surface. In this finish. the part matches the original matt carbon parts. offered by Ducati Performance. perfectly. The part gives the V4 R an even more agressive look. This part is a direct replacement for the original component and mounted only on original mounting points. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The upper tank cover (matt) for the Ducati Panigale V4 R is delivered in matt surface and matches the original. also matt carbon parts. offered by Ducati Performance quite perfect. The part gives the Panigale V4 an even more agressive look. This part is a direct replacement for the original component and mounted only on original mounting points. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The upper tank cover is available in two surface versions. The high-gloss surface pronounced the sporty character of the Panigale V4 / V4 S Racing. The upper tank cover is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The upper tank cover is available in two surface versions. The matt finish of the surface fits perfectly with the original carbon parts of the Panigale V4 / V4 S Racing. The upper tank cover is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

HONDA CRF1000L Africa Twin from 2016 Vario Windscreen Variotouringscreen VT Product Description The MRA Variotouringscreen consists of the touring screen as the base screen with all its advantages and a seven-position adjustable Variotouring spoiler at the top. This allows the airflow between the screen and the VT spoiler to be more or less diffused, further reducing wind pressure without creating turbulence. Optimal conditions for relaxed riding, even on long tours.

Verbreiterungsset für Motorschutzbügel für BMW R 12 (2024-)Lieferumfang: Verbreiterungsset + Befestigungsmaterial + AnbauanleitungWird benötigt zur Kombination von Hepco & Becker Motorschutzbügel (Art. 5016539 00 01) mit originalem Zylinderkopfhaubenschutz.