DUCATI

The beak, or upper fender, for the Ducati Multistrada DVT (from model year 2015), matte finish, replaces the original plastic component. Especially at the aggressive front of the Multistrada series, the carbon part accentuates the sporty character of the motorcycle. The beak is designed as a single piece, and the underside is finished with a special additional carbon part included in the delivery. All mounting points for the headlight are present on the Ilmberger beak. Only standard mounting materials are used, and, as is customary with Ilmberger, only standard holding and screw points are utilized. The matte finish matches perfectly with the original Ducati Performance carbon parts, which are also delivered in a matte finish. These are already installed on many Multistradas from the factory.   Of course, the cover can also be ordered in a glossy carbon finish, which contrasts with the original Ducati Performance accessory carbon parts. The carbon part was completely manufactured according to the latest guidelines in an autoclave from prepreg (see FAQ) material and, as is customary for us, coated with a clear plastic coating in the next step to protect against environmental influences. This plastic coating significantly surpasses the usual clear lacquer coating in terms of protective effect, scratch resistance, and durability.  

The Electrical cable cover in Carbon with gloss surface for the Ducati XDiavel 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Our carbonpart weighs only about 45g!. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Electrical cable cover in Carbon with matt surface for the Ducati XDiavel 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Our carbonpart weighs less than 50g. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The engine cover in carbon for the Ducati Monster 1200 / 1200 S from 2017 is a supplement to the original engine casing. It helps to protect the delicate engine casing in case of an accident or other damages. As it is not a replacement but an additional part. we specially kept an eye on extreme lightweight at most effective stiffness.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The engine cover in carbon for the Ducati Monster 1200 / 1200 S from 2017 is a supplement to the original engine casing. It helps to protect the delicate engine casing in case of an accident or other damages. As it is not a replacement but an additional part. we specially kept an eye on extreme lightweight at most effective stiffness. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The engine guard right side for the Ducati Monster 1200 / 1200 S from 2017 is a protection for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The engine guard right side for the Ducati Monster 1200 / 1200 S from 2017 is a protection for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The exhaust cover in carbon with gloss surface for the Ducati XDiavel 2016 .Our carbonpart weights only about 80g!Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The exhaust cover for the Ducati 1200 and 1200 S models from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. We use a special high-temperature prepreg material for manufacturing parts used near the exhaust to keep discolouration and burn-off of the carbon at a minimum based on today's technology.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The exhaust cover for the Ducati 1200 and 1200 S models from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. We use a special high-temperature prepreg material for manufacturing parts used near the exhaust to keep discolouration and burn-off of the carbon at a minimum based on today's  technology.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The exhaust cover in carbon with matt surface for the Ducati XDiavel 2016 .Our carbonpart weights only about 80g!Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Exhaust cover left side in matt for Ducati Panigale V4 / V4 S 2022 This Carbonpart is only compatible with the following exhaust: - Akrapovič Racingsilencer (Codenr. 96482101A on Ducati configutation site) - Akrapovič complete titanium exhaust system (code number 96482081A or 96482001A on Ducati configurator site) Notes for mounting: - for the right sideit's the part with the number ACR.111.V422M.K - for the racing silencer the ADR.112.V422M.K need to be used. too. - The Ilmberger Carbon Bellypan (VUL.107.V22M.K + VUR.108.V422M.K) is compatible In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly easy assembly

Exhaust cover left side in gloss for Ducati Panigale V4 / V4 S 2022 This Carbonpart is only compatible with the following exhaust: - Akrapovič Racingsilencer (Codenr. 96482101A on Ducati configutation site) - Akrapovič complete titanium exhaust system (code number 96482081A or 96482001A on Ducati configurator site) Notes for mounting: - for the right side the parts with the number ACL.010.V422G.K is needed - for the racing silencer the  ADR.012.V422G.K is additionally needed. - The Ilmberger Carbon Bellypan (VUL.007.V22G.K + VUR.0008.V422G.K) is compatible In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional high-gloss clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

Exhaust cover right side in matt for Ducati Panigale V4 / V4 S 2022 This Carbonpart is only compatible with the following exhaust: - Akrapovič Racingsilencer (Codenr. 96482101A on Ducati configutation site) - Akrapovič complete titanium exhaust system (code number 96482081A or 96482001A on Ducati configurator site) Notes for mounting: - for the racing silencer the ADR.112.V422M.K need to be used. too. - The Ilmberger Carbon Bellypan (VUL.107.V22M.K + VUR.108.V422M.K) is compatible In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. The facts:   - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - TÜV certified quality - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The exhaust heat guard in carbon for the Ducati Streetfighter is made from a special high-temperature pre-preg carbon material in a unique autoclave manufacturing process in order to keep the discolouration of the carbon fibre at a minimum when exposed to the effects of high heat. The exhaust protector in carbon for the Ducati Streetfighter is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon exhaust heat shield for the Streetfighter V2 is a visual highlight in the center of the motorcycle. But it also offers technical advantages. Carbon conducts heat less quickly. so the surface appears less hot at first. The leg of the rider and pillion are thus better protected against burns from the manifold. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. Thanks to more heat-resistant resin and additional heat protection on the inside. the carbon does not discolor even in the long term.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - additional heatshield integrated - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly  

Fits on Ducati Panigale/Streetfighter V4/V4S Models till 2021 (with Euro IV) Exhaust.The exhaust protection (gloss) for the Ducati Panigale V4 / V4 S is delivered in glossy surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance. The part is made from special. heat resistant carbon prepreg material to avoid any overheating or burning. This item is not compatible with the Euro 5 models.   This part is a direct replacement for the original component and mounted only on original mounting points. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The exhaust heat guard in carbon for the Ducati Monster 696/1100 is made from a special high-temperature pre-preg carbon material in a unique autoclave manufacturing process in order to keep the discolouration of the carbon fibre at a minimum when exposed to the effects of high heat. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The exhaust protection for the left side in Carbon with gloss surface for the Ducati Scrambler 1100 from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The exhaust protection for the left side in Carbon with matt surface for the Ducati Scrambler 1100 from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The exhaust cover on the manifold for the Ducati 1200 and 1200 S models is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. We use a special high-temperature prepreg material for manufacturing parts used near the exhaust to keep discolouration and burn-off of the carbon at a minimum based on today’s technology. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The exhaust cover on the manifold for the Ducati 1200 and 1200 S models is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. We use a special high-temperature prepreg material for manufacturing parts used near the exhaust to keep discolouration and burn-off of the carbon at a minimum based on today’s technology. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon exhaust heat shield for the Streetfighter V2 is a visual highlight in the center of the motorcycle. But it also offers technical advantages. Carbon conducts heat less quickly. so the surface appears less hot at first. The leg of the rider and pillion are thus better protected against burns from the manifold. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part. Thanks to more heat-resistant resin and additional heat protection on the inside. the carbon does not discolor even in the long term.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional matte clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - additional heatshield integrated - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly  

Fits on Ducati Panigale/Streetfighter V4/V4S till MY 2021 (with Euro IV exhaust)The exhaust protection (matt) for the Ducati Panigale V4 / V4 S is delivered in matt surface. In this finish. the part matches the original matt carbon parts. offered by Ducati Performance. perfectly. The part is made from special. heat resistant carbon prepreg material to avoid any overheating or burning.   This item is not compatible with the Euro 5 models.   This part is a direct replacement for the original component and mounted only on original mounting points. It contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance