DUCATI

The carbonfiber Airtube cover left side with matt surface for the Ducati Diavel 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbonfiber Airtube cover right side with gloss surface for the Ducati Diavel 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbonfiber Airtube cover right side with matt surface for the Ducati Diavel 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The wind tunnel cover on the left side for the Ducati Streetfighter V2 significantly changes the appearance of the motorcycle. The motorcycle looks sportier and even more aggressive.   The glossy finish underlines the roots of the bike on the racetrack   The component can utilize its full potential not only technically. but also optically. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The wind tunnel cover on the left side for the Ducati Streetfighter V2 significantly changes the appearance of the motorcycle. The motorcycle looks sportier and even more aggressive.   The matte finish is identical to the finish of the Ducati Performance Parts   In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The airtube cover in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The wind tunnel cover on the right side for the Ducati Streetfighter V2 significantly changes the appearance of the motorcycle. The motorcycle looks sportier and even more aggressive.   The glossy finish underlines the roots of the bike on the racetrack   The component can utilize its full potential not only technically. but also optically. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The wind tunnel cover on the right side for the Ducati Streetfighter V2 significantly changes the appearance of the motorcycle. The motorcycle looks sportier and even more aggressive.   The matte finish is identical to the finish of the Ducati Performance Parts   In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

This Airventcover for the Ducati Multistrada DVT from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

This part for the Ducati Multistrada DVT from 2015 is a direct replacement for the original component. Only the original fitting points are used for an appropriate mounting. The part can also be orderd in matte Surface.  matching perfectly with the original Ducati Perfomance carbonparts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and gives a unique UV resistance. 

The Airventcover on sidefairing left side in matt surface for the Ducati Multistrada DVT from 2015 is a direct replacement for the original component. Only the original fitting points are used for an appropriate mounting. The part can also be orderd in matte Surface.  matching perfectly with the original Ducati Perfomance carbonparts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and gives a unique UV resistance.  

This Airventcover for the Ducati Multistrada DVT from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The optional heat shield adds a unique touch to the overall appearance of the Akrapovič Slip-On Line (Titanium) exhaust system. Made from handcrafted, forged carbon fiber – a material and process rarely used in the motorcycle industry – this beautifully designed product replaces the standard aluminum version, which can still be used with the Slip-On Line (Titanium) exhaust system upon request, and provides the perfect visual finish to this custom-designed exhaust system.

This newly developed system features a dual-conical silencer and a connecting pipe that perfectly harmonize with the style of the motorcycle. The exhaust system is made of high-quality stainless steel with black coated silencers and is adorned with a laser-engraved Akrapovič logo. Weighing only 3.0 kg, it is 55.8% lighter than the stock system and has been designed exclusively for use on closed racetracks.The racetrack-oriented design increases power by 1.6 kW (2.2 hp) at 8,600 rpm and torque by 3.0 Nm at 4,500 rpm - tested on the Akrapovič dynamometer and compared to a Scrambler with the stock exhaust system. Additionally, it provides a deep, sporty, and powerful sound. The system can be easily installed via Plug & Play, without the need for additional mapping, and fits the Urban Motard, Nightshift, Icon, Icon Dark, and Desert Sled versions of the Ducati Scrambler.The exhaust system can be expanded with optional headers and an optional carbon heat shield.For customers installing the exhaust system on the Desert Sled model, it is mandatory to purchase the original Ducati mounting kit 96481551A.THIS PRODUCT DOES NOT MEET EMISSION STANDARDS FOR ROAD USE.

The silencer housing is made of high-quality titanium, while the connecting pipe and the internal structure of the silencer are made of stainless steel. Equipped with an end cap and a heat shield made of carbon, this exhaust system reduces weight by 33.4% (1.1 kg). The new design gives the motorcycle excellent durability and individuality. With the newly developed heat shield, the package provides protection for the passenger while ensuring a unique overall appearance. A power increase of 1.8 kW (2.4 hp) at 9,400 rpm and a torque increase of 1.8 Nm at 8,100 rpm - compared to a Ducati DesertX equipped with the stock system and tested on Akrapovič's in-house dynamometer - is accompanied by a perfect response to the throttle. The exhaust system features an EU/ECE type approval and can be easily installed via plug & play, without the need for re-mapping.Another upgrade can be achieved with the optional connecting pipe, which is designed for more power and a sportier sound experience.By installing the optional link pipe (stainless steel), the EC/ECE type approval of the Slip-On-Line exhaust system (titanium) is void.

Equipped with two short mufflers that emphasize the bike's twin engine. The muffler housing and the collector are made of lightweight titanium, which is sandblasted for an optimal finish and appealing look. The remaining parts are made of high-quality stainless steel. The exhaust system with Euro 5 EC/ECE type approval offers an easy plug-and-play installation that does not require reprogramming. The deep and dynamic sound highlights the engine characteristics of the bike. The power increases by 1.6 kW (2.2 hp) at 8,800 rpm and the torque by 3.5 Nm at 3,100 rpm (based on tests on the Akrapovič test bench compared to a Monster with a stock exhaust system).As an option, a handcrafted forged carbon heat shield is available, giving the exhaust system an exclusive touch. Designed to replace the stock aluminum version, which can still be used with the Akrapovič Slip-On Line (Titanium) exhaust system, this heat shield is a very rare product in the motorcycle world. Also available as an option is a link pipe made of stainless steel, which further enhances power and torque, reduces weight, and improves gas flow. The Akrapovič Slip-On Line exhaust system (Titanium) and the carbon heat shield for the Ducati Monster and Monster + were awarded the prestigious Red Dot Award 2022 in the field of product design.By installing the optional link pipe (stainless steel), the EC/ECE type approval of the Slip-On Line exhaust system (Titanium) is void.

Slip-ons are the first step in the field of exhaust tuning and offer an excellent price-performance ratio. The slip-on with 2 conical tailpipes in GP style is made from titanium, a race-proven material. The system enhances performance, delivers a deeper, more pleasant sound, and also complies with EC-ECE type approval. The design is complemented by a carbon heat shield.The exhaust system can be equipped with Ducati side cases and a center stand.

The Slip-On Line exhaust system, made from high-quality titanium and type-approved, ensures increased performance across the entire RPM range. Due to the use of motorsport-tested materials, the weight is reduced. Handling and agility are also improved. With the use of heat shields made from carbon fibers and specially developed mufflers that have their origins in motorsport, along with conical double pipes that are proven in Grand Prix racing, this exhaust system is truly impressive.This exhaust system also fits the Ducati Scrambler 1100 Dark Pro.

This newly developed connecting pipe, made of high-quality stainless steel, replaces the stock pre-silencer that contains the stock catalyst. It leads to a more direct exhaust flow, enhancing performance. With an enormous weight reduction of 79.2% (3.8 kg) compared to the original connecting pipe, this option also increases power by 3.2 kW (4.4 hp) at 8,600 rpm and torque by 5.6 Nm at 4,600 rpm when mounted with a Slip-On Line (Titanium) on a Ducati DesertX and compared to the stock system on the in-house Akrapovič test bench. This optional part delivers a sportier racing sound. It does not have EC/ECE type approval and has been developed exclusively for use on closed racetracks. It features a simple plug-and-play installation, with ECU re-mapping recommended.With the installation, the EC/ECE type approval of the Slip-On Line (Titanium) is void.The optional Link Pipe/Collector (SS) has been tested and developed together with the Slip-On Line (Titanium) system.THIS PRODUCT DOES NOT MEET THE EMISSION STANDARDS REQUIRED FOR ROAD USE.

{}

This alternator cover is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Alternator cover (gloss) for the Ducati Panigale V4 / V4 S is delivered in glossy surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance. The Ilmberger Carbon Alternator cover is a protective piece. mounted over the original part. It is mounted only on original mounting points.   This part contributes mainly to weight saving (compared to other protective materials) on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

{}