DUCATI

The heel guard in Carbon comes with a gloss finish and this part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The heel guard in Carbon comes with a matt finish and this part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The set of heelguards in carbon for the Ducati models 848/1098/1198 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The product is in progress - product description and price will follow shortly.

The heel guard right (gloss) for the Ducati Panigale V4 / V4 S is delivered in glossy surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance.     This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The heelguard right (matt) for the Ducati Panigale V4 / V4 S is delivered in matt surface. In this finish it matches the original matt Ducati Performance Carbon parts perfectly.   This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Dank der drei verfügbaren Heizstufen findet der Fahrer stets die für die aktuelle Witterung geeignetste Einstellung und kalte Hände sind Vergangenheit - damit Sie auch an kälteren Tagen nicht auf die Freude am Fahren verzichten müssen. passend für folgende Modelle: Monster Monster 1200 2021, 2020, 2019, 2018, 2017 Monster 1200 S 2021, 2020, 2019, 2018, 2017 Monster 937 2021, 2022, 2023 Monster 937 SP 2021, 2022, 2023 Hypermotard Hypermotard 950 2023, 2022, 2021, 2020, 2019 Hypermotard 950 SP 2023, 2022, 2021, 2020, 2019 Scrambler Scrambler 1100 Special 2018, 2019 Scrambler 1100 Icon 2018, 2019 Scrambler 1100 Sport 2018, 2019 Scrambler 1100 Pro 2020, 2021, 2022, 2023 Scrambler 1100 Sport Pro 2023,2022,2021, 2020 Scrambler 1100 Tribute Pro 2022, 2023 Scrambler 800 Icon 2. Gen ab 2023 Scrambler 800 Nightshift 2. Gen ab 2023 Scrambler 800 Full Throttle 2. Gen ab 2023 Scrambler 800 Icon Dark Diavel Diavel 1260 2019, 2020, 2021 Diavel 1260 S 2019, 2020, 2021 Diavel V4 2023 XDiavel XDiavel 2021, 2020, 2019, 2018, 2017, 2016 XDiavel S 2023, 2022, 2021, 2020, 2019, 2018, 2017, 2016 XDiavel Dark 2021 XDiavel Black Star 2023, 2022, 2021 Multistrada Multistrada 950 2021, 2020, 2019, 2018, 2017 Multistrada 950 S 2021, 2020, 2019 Multistrada V2 2022, 2023, 2024 Multistrada V2 S 2022, 2023, 2024 Supersport SuperSport 2020, 2019, 2018, 2017 SuperSport S 2020, 2019, 2018, 2017 Supersport 950 2024, 2023, 2022, 2021 Supersport 950 S 2024, 2023, 2022, 2021 Streetfighter Streetfighter V4 2020, 2021, 2022, 2023 Streetfighter V4 S 2020, 2021, 2022, 2023 Streetfighter V4 SP 2022 Streetfighter V2 2022, 2023 Streetfighter V4 SP2 2023 Superbike Panigale V4 2022, 2023 Panigale V4 S 2022, 2023 Panigale V4 SP2 2022, 2023 Referenznummer: 96680574A

Hinterer Kotflügel aus Kohlefaser für Ducati Multistrada V4 Pikes Peak 2022 96981531AA Der unverwechselbare Stil der Multistrada V4 Pikes Peak wird durch dieses Kohlefaser-Detail unterstrichen. Die einzigartige Endverarbeitung dieses Zubehörs und seine ausgepägten Linien werten den Heckbereich des Motorrads weiter auf und verleihen ihm Leichtigkeit. passend für: Multistrada V4 Pikes Peak 2022

The holder for the rear turn signals in Carbon with gloss surface for the Ducati Scrambler 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. Fits for Scrambler 800 Modells:  Classic. Desert Sled. Icon. Sixty2

The tail bag in classic Ibarra design!Specifically designed for mounting on the luggage racks of adventure bikes such as the BMW GS models or the KTM Adventure series, the Ibarra tail bag also fits on the luggage racks of most current adventure bikes. It is super easy to install and provides easily accessible additional storage space. The passenger is not restricted in any way, and the position of the bag far back on the vehicle does not unnecessarily complicate mounting for the rider.Non-slip, precisely fitting base plate for a play-free and stable hold on the vehicleHigh-quality Cordura®Washable and easy to cleanReflective inserts for increased safetyWaterproof, high-quality zippersElastic, reflective drawstring with quick-release for easy attachment of gloves or rain jacketLarge main compartment without dividers for maximum space and individual loadingRain cover available as an optionPlease use a paint protection film if necessary! Dimensions: (L x W x H) approx. 24 x 29 x 17 cmVolume: approx. 9 liters

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The ignition Switch cover in Carbon for the Ducati Monster 1200 / 1200 S from 2017 comes with a matt finish and this part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The ignition Switch cover in Carbon comes with a matt finish and this part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Ignition Switch Cover in carbon for the Ducati Streetfighter is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Our Ignition switch cover or the Ducati Supersport 939 in gloss finish blends into the motorcycle's overall appearance. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbonfiber ignition cover with gloss surface for the Ducati Diavel 1260 MY2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The ignition cover in gloss for the Ducati Streetfighter V2 again underlines the racing DNA of the superbike. The Ilmberger carbon ignition lock cover is installed instead of the standard plastic part and mounted exclusively on standard mounting points. The glossy finish underlines the roots of the bike on the racetrack   The component can utilize its full potential not only technically. but also optically. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The ignition switch cover (gloss) for the Ducati Panigale V4 / V4 S is delivered in glossy surface. In this finish. the part is in contrast to the original matt carbon parts. offered by Ducati Performance.     This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

This Ignition Switch Cover in carbon for the Ducati MTS 1200 DVT from MY 2015 is delivered with gloss surface. The windshield in carbon for the Ducati Multistrada 1200 DVT from  2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Our Ignition switch cover or the Ducati Supersport 939 in matt finish blends into the motorcycle's overall appearance. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.