DUCATI

The mudgard for the Ducati Multistrada DVT from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The mudgard for the Ducati Multistrada DVT from 2015 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The front mudguard is equipped with all necessary holders for the orignal ABS sensor cables and brake lines. The part is also equipped with the important holder for the very common electronic skyhook supension. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As on all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Front mudguard in Carbon with gloss surface for the Ducati Scrambler 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. Fits for Scrambler 800 Models: Icon  

This carbon front fender for the Ducati Diavel Model 2019 will be supplied in gloss painted finish. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front Mudguard (gloss) for the Ducati Panigale V4 / V4 S is delivered in glossy surface. In this finish. the part is in contrast to the original matt Ducati Performance Carbon parts. The Ilmberger Carbon front mudguard contains all necessary holders for ABS cables and brake lines. The special shape helps reduce front brake-caliper temperature during hard braking.   This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Front mudguard in Carbon with gloss surface for the Ducati Scrambler 1100 from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The left side Front mudguard holder in Carbon with gloss surface for the Ducati Scrambler 1100 from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The right side Front mudguard holder in Carbon with gloss surface for the Ducati Scrambler 1100 from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The right side Front mudguard holder in Carbon with matt surface for the Ducati Scrambler 1100 from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Front mudguard in Carbon with matt surface for the Ducati Scrambler 2016 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts.  Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. Fits for Scrambler 800 Models: Icon  

The front Mudguard (matt) for the Ducati Panigale V4 / V4 S is delivered in matt surface. In this finish it matches the original matt Ducati Performance Carbon parts perfectly. The part contains all necessary holders for ABS cables and brake lines. The special shape helps reduce front brake-caliper temperature during hard braking.   This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Front mudguard in Carbon with matt surface for the Ducati Scrambler 1100 from 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This carbon front fender for the Ducati Diavel from Model 2019 will be supplied in matt painted finish. it matches with the original carbonparts. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front sprocket cover in carbon for the Ducati Streetfighter and Monster 1100 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Our Front sprocket cover for the Ducati Supersport 939 in gloss finish blends into the motorcycle's overall appearance. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The sprocket cover is one of the most underrated components on the whole motorcycle. Installed centrally on the motorcycle. it surrounds the chain sprocket and does more than it might seem at first glance. It protects the engine and many other components from flying grease while driving. This is particularly stubborn as dirt and difficult to remove from the soft surface of the original part. A hard surface. as it occurs with high-quality carbon. is more suitable here. The component can utilize its full potential not only technically. but also optically. Installed in just a few minutes. the value of the motorcycle is increased enormously. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight.  In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. So that not only driving but also screwing is a pleasure. we only use the original fastening points for this part.   The facts:   - with German ABE - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Additional glossy clear lacquer coating on all visible surfaces - optimally protected against UV light - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front sprocket cover for the Ducati Monster 1200 / 1200 S is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

Our Front sprocket cover for the Ducati Supersport 939 in matt finish blends into the motorcycle's overall appearance. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Stabile Aluminiumplatte zur Verbreiterung auf nahezu allen Gepäckbrückenmit gerader Auflagefläche, wenn kein Topcase, sondern loses Gepäck transportiert werden soll. Durch die hochgezogenen Kanten und die zusätzlichen Haltepunkte ist die Verbreiterung ideal zum sicheren Transport auch größerer Gepäckrollen, Reisetaschen, Zelte, Seesäcke etc. geeignet.Konstruktion aus Aluminium mit hoher Festigkeit und hochwertiger OptikBefestigungsmöglichkeiten für GurteNicht geeignet zur Topcasemontageinkl. Montagematerial und Anleitunghochwertige KunststoffbeschichtungEmpfohlene Zuladung: 5kg (Bitte beachten Sie die modellspezifischen Hinweise, sowie die motorradherstellerspezifischen Herstellerangaben. Schweres Gepäck sollte generell nicht auf dem Heck, sondern in den Seitenkoffern oder dem Tankrucksack transportiert werden.

Stabile Aluminiumplatte zur Verbreiterung auf nahezu allen Gepäckbrückenmit gerader Auflagefläche, wenn kein Topcase, sondern loses Gepäck transportiert werden soll. Durch die hochgezogenen Kanten und die zusätzlichen Haltepunkte ist die Verbreiterung ideal zum sicheren Transport auch größerer Gepäckrollen, Reisetaschen, Zelte, Seesäcke etc. geeignet.Konstruktion aus Aluminium mit hoher Festigkeit und hochwertiger OptikBefestigungsmöglichkeiten für GurteNicht geeignet zur Topcasemontageinkl. Montagematerial und Anleitunghochwertige KunststoffbeschichtungEmpfohlene Zuladung: 5kg (Bitte beachten Sie die modellspezifischen Hinweise, sowie die motorradherstellerspezifischen Herstellerangaben. Schweres Gepäck sollte generell nicht auf dem Heck, sondern in den Seitenkoffern oder dem Tankrucksack transportiert werden.