Front Race Fairing (1 piece) fits to BMW S 1000 RR starting from MY 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The Racing 1-piece carbon top trim for the BMW S 1000 RR is not only compatible with our Racing trim but can also be combined with the series side fairing. This only requires two additional holes to be tapped in the side of the upper piece. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

EBC Prolite Brake Disc, Full Floater   EBC replaces the rigid original disc with a Full Floater brake disc. The manufacturing of the complex and expensive Full Floater offers significant advantages when braking. The brake ring, sawed, drilled, and ground from forged HPSR steel bars, can expand freely even during repeated hard braking, such as when descending mountain passes, without deforming. Here, the low carbon content of the used HPSR steel proves beneficial, as it ensures minimal microstructural changes in the steel under the thermal stress of heating and cooling the brake disc in demanding road conditions. An EBC Full Floater brake disc is always a significant gain in safety.   - Brake ring machined from forged HPSR steel with low carbon content. - Therefore, no warping of the brake disc even under maximum load. - No glazing of the braking surface, thus maintaining a constant coefficient of friction. - Braking surface drilled with an optimized hole pattern. - Zinc-coated for protection against corrosion. - Hub made of anodized aluminum. - Minimal manufacturing tolerances. - EBC recommends EBC Double-H sintered brake pads for optimal braking performance. - Independent design.Technical Data:Outer Diameter:   260 mmInner Diameter:   62.2 mmBolt Circle:   79 mmNumber of Holes:   5 Hole Diameter:   8.5 mmThickness:   4.7 mmOffset:   47.8 mmDesign:   floating Manufacturer:   EBC

The front exhaust cover in carbon for BMW K 1300 S (2008-now) / K 1300 R (2008-now) models is made from a special high-temperature prepreg carbon material using a special autoclave method to keep discolouration of the carbon fibre at a minimum under extreme heat. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Front Silencer Protector BMW R 1250 R and R 1250 RS MY starting from 2019This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front exhaust cover in carbon for BMW K 1200 S (2005-2008) / K 1200 R Sport (2007-2011) / K 1300 R (2008-now) models is made from a special high-temperature prepreg carbon material using a special autoclave method to keep discolouration of the carbon fibre at a minimum under extreme heat. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Front Silencer Protector Carbon - BMW R 1200 R (LC) from 2015 / BMW R 1200 RS (LC) from 2015 The front exhaust cover in carbon is made from a special high-temperature prepreg carbon material using a special autoclave method to keep discolouration of the carbon fibre at a minimum under extreme heat. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Front Sprocket Cover BMW S1000XR'15 The front Sprocket Cover in Carbon for the BMW S 1000 XR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. 

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front sprocket cover in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. This part fits to bikes with ABS. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front sprocket cover in carbon is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. This part fits to bikes with ABS. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Die Ritzelabdeckung in Carbon für die BMW S 1000 RR ab 2015 ersetzt das originale Bauteil unter Verwendung der originalen Befestigungspunkte. Die Ritzelabdeckung ist für Modelle mit ABS geeignet. Im Vordergrund stehen Gewichtsersparnis (in der Regel Einsparung von ca. 70% im Vergleich zum originalen Bauteil) und höhere Steifigkeit. Das Carbonteil wurde nach den neuesten Richtlinien im Autoklaven komplett aus Prepreg (siehe FAQ) Material gefertigt und im nächsten Schritt. wie bei uns üblich. zum Schutz gegen Umwelteinflüße mit einer klaren Kunststoffbeschichtung überzogen. Diese Kunststoffbeschichtung übertrifft den sonst üblichen Klarlacküberzug in der Schutzwirkung. Kratzfestigkeit und Beständigkeit enorm. Aber nicht nur technisch kann die Beschichtung punkten. sondern sie unterstreicht auch die dreidimensionale Wirkung der Carbonstruktur nochmals deutlich.

Wheel Bearing Set JMP

Front wheel hub cover for the hole in the wheel mount - for your F800R-F800S-F800ST All items have been mounted and tested on original motorcycles - without aftermarket modifications.

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können.gute Schutzwirkung bei Umfallern und Stürzen bei niedriger GeschwindigkeitBlinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschütztqualitativ hochwertige Pulverbeschichtunginkl. AnbaumaterialFür Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können.gute Schutzwirkung bei Umfallern und Stürzen bei niedriger GeschwindigkeitBlinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschütztqualitativ hochwertige Pulverbeschichtunginkl. AnbaumaterialFür Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Für häufig in Fahrschulen genutzte, ausgewählte Motorradmodelle, von der 125er bis zur 750er, bieten wir spezielle Schutzbügel für vorne und hinten an, die mit unseren Motorschutzbügeln kombiniert werden können.gute Schutzwirkung bei Umfallern und Stürzen bei niedriger GeschwindigkeitBlinker, Kupplungs- und Bremshebel, Auspufftöpfe, Verkleidungsteile etc. werden wirkungsvoll geschütztqualitativ hochwertige Pulverbeschichtunginkl. AnbaumaterialFür Fahrschulen bieten wir Sonderkonditionen an. Kontaktieren Sie dazu bitte unsere Ansprechpartner. Tel: 06331/1453-222 oder Mail: [email protected]

Angeboten wird hier ein Gebrauchtteil Fahrzeug: E169 F650 97 F650ST Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer und Abschürfungen Teilenummer:46632346284

Angeboten wird hier ein Gebrauchtteil Fahrzeug: E169 F650 97 F650ST Hersteller: BMW Zustand: deutliche Gebrauchsspuren Beschreibung: wird verkauft wie abgebildet, Kratzer  Teilenummer:46632346283

Fuel Filter Screen

Original BMW Level Sensor NEW !!! Product Description This offer includes 1 level sensor. This offer applies to the item in the red marked circle !!! ( Illustration No. 8 ) BMW Part Number: 16147697815 Fits according to part number for the following vehicles: R 1200 R 09 R 1200 R 11 R 1200 S

JMP Fuel Pump

Fuel Pump Repair Kit for BMW K1 K75 K100 K1100 DIRECT-FIT Fuel Pump for BMW K Models 1988-2005Quick and easy DROP-IN INSTALLATION: Replace all worn components to restore OE performance. Often, the rubber parts, such as the vibration damper, are also heavily worn. Rubber residues can be found in the fuel lines. Sometimes the fuel filter is even damaged. All these potential sources of error can be eliminated with this kit. Delivery directly from Germany. No additional import taxes or duties for EU customers!FEEL THE PERFORMANCE DIFFERENCE! DESIGNED TO IMPROVE PERFORMANCE AND ENSURE LONGEVITY. Developed and constructed for trouble-free operation of over 2,500 hours or 100,000 miles. Enhanced polymers, brushes, and commutators ensure a steady flow, power intake, and quiet operation.The ideal replacement for BMW part number: 16121461576 Fits according to BMW ETK in the following vehicles: K589 (K1, K 100 RS)   (08/1988 — 09/1993) K589 (K 1100 RS, K 1100 LT)   (06/1989 — 04/1999) K589 (K100, RS, RT, LT)   (05/1982 — 10/1991) K569 (K 75, K 75 C, K 75 S, K 75 RT)   (12/1984 — 06/2005)

Fuel Tank Seal