The front beak Extension for the BMW R 1250 GS Adventure from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Our cables and shafts are predominantly manufactured in Europe. The smooth operation is enhanced by special oils, greases, or coatings. For the cables, a high-quality silicone oil is typically used to reduce hand forces. This oil provides long-lasting lubrication and does not dry out. The shafts glide in a durable calcium grease.

n.v.

Vehicle-Specific Information: For high handlebars

Vehicle-Specific Information: for ATE CaliperBrake Caliper Piston Set 36 mm for ATE and BremboTechnical Data:Outer Diameter: 36.00 mm

The fixed discs of the Brembo Oro series are made from a single casting of stainless steel. The manufacturing process adheres to strict tolerances regarding design and construction. Through the machining cycles, maximum suitability and run-out safety are ensured.   Due to its extensive experience, Brembo has been able to determine the appropriate shapes, tolerances, and sizes for every type of motorcycle and application. In fact, the special shaping of the Brembo discs, through careful examination of the machining tolerances, improves the transfer of braking torque while simultaneously providing enhanced resistance to mechanical and thermal stresses.Technical Data:Outer Diameter:   260 mmInner Diameter:   62 mmBolt Circle:   79 mmNumber of Holes:   5 Hole Diameter:   8.5 mmThickness:   4 mmDesign:   fixed Manufacturer:   Brembo

Thanks to the use of high-quality materials, the floating-mounted discs offer excellent performance. They consist of a stainless steel friction ring and a brake pot made from CNC-machined aluminum alloy, which is connected with ten drive pins and then anodized. Technical Data:Outer Diameter: 285 mmInner Diameter: 62 mmBolt Circle: 79 mmNumber of Holes: 4 Hole Diameter: 10.5 mmThickness: 4 mmOffset: 29 mmDesign: floating Manufacturer: Brembo

Brake Light Switch

This is a new part with storage marks Vehicle: R18 Manufacturer: BMW Condition: Like new with storage marks Description: sold as shown Part number: 34328414937

This is a new part with storage marks Vehicle: R18 Manufacturer: BMW Condition: Like new with storage marks Description: sold as shown Part number: 34328414937

You need the extended brake line EL63BD when you are installing the MV handlebar extension in conjunction with the high handlebar or Avandgard handlebar, and your brake line has a ring on both sides.

10/49 Carbon-Ceramic Street Brake Pad   Identical organic compound as the OE pad to ensure safe, consistent braking performance that reflects the manufacturer's original specifications.

Vehicle-Specific Information: for ATE Caliper10/49 Carbon-Ceramic Street Brake Pad Identical organic compound as the OE pad to ensure safe, consistent braking performance that reflects the manufacturer's original specifications.

Vehicle-Specific Information:  for double discSV - Friction Material CompositionFull metallic sintered material with special coating.High friction coefficient guarantees very good performance.Can be used on almost all discs.Only in exchange for sintered materials in the original equipment.Only conditionally suitable for motorsport, as there is no heat resistance above 400 degrees.Only suitable for the front axle.

Vehicle-Specific Information: for ATE CaliperEBC Brake Pads Standard The EBC version SK930/ SK931/ SK932/ SK933/ SK934 contains aramid fibers that are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in production. These standard materials exceed all previous EBC standard qualities. The material mixtures, including the aramid fibers, guarantee better braking performance. High friction stability and very good temperature resistance. The lifespan is very high, and the disc wear is low. These qualities maintain their excellent properties under all weather conditions. EBC standard brake pads are TÜV certified and have an ABE.

EBC Brake Pads Standard The EBC version SK930/ SK931/ SK932/ SK933/ SK934 contains aramid fibers that are 6 times stronger than steel and completely asbestos-free. Only low-emission components are used in production. These standard materials exceed all previous EBC standard qualities. The material mixtures, including the aramid fibers, guarantee better braking performance. High friction stability and very good temperature resistance. The lifespan is very high, and the disc wear is low. These qualities maintain their excellent properties under all weather conditions. EBC standard brake pads are TÜV certified and have an ABE.

Vehicle-Specific Information: for ATE CaliperStandard Pad Organic with ceramic underlayer for thermal insulation. Anti-corrosion coating, high durability. Compatible with all discs. Solid braking performance, good wet braking behavior. Suitable for front and rear axle.

The 1-piece carbon upper trim for the BMW M 1000 RR replaces the original part using the original mounting points. The upper section is a 1-piece version. the centre trim piece is already incorporated into the carbon part. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter!For race only - no ABE and TÜV This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front fairing in carbon for the BMW K 1300 S is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front carbon trim holder/instrument holder for the BMW S 1000 RR replaces the series instrument holder. We were able to further reduce the weight of the quite light series component through clever use of carbon. The trim holder is only intended for racing use. The holder does not feature headlight brackets. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The front fairing for the BMW M1000RR Racing is part of the race fairing kit of the BMW M1000RR Racing. It is mounted via quick fasteners and not compatible with the original fairing parts.   The Winglets are screwed directly to the front fairing and it can be taken off as a three part unit within seconds. In contrast to the 2022 model the wind drag on the rider is reduced and the big surface on front allows an easy mounting of the starting number.  A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level. In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own. If the fornt fairing should be mounted on the original fairing holder an aditional holder is needed. The holder also includes the preperation for the use of quick fasteners. If needed. just write a short ­e-mail and we put the holder to the package without additional costs.   The facts   - racing part. not for street use - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly

The carbon front fairing for the BMW S1000RR Racing is part of the racing fairing for the BMW S 1000 RR since 2023. It sis designed to be mounted with quick fasteners and not compatible with the original street fairing parts.  The upper mounting points on the instrument holder are the same as original and can be used. We recommend the usage of the carbon instrument holder.  A Carbonfairing is the lightest possible way of producing a fairing and protects the parts underneath on an extraordinary high level.  The holes on the side support the hot air stream away from the watercooler.    In order to obtain a harmonious overall picture. the fiber layers are inserted and aligned in the mold by experts. The carbon part fits perfectly into the surrounding shapes of the motorcycle. The more of our parts are installed and combined. the more overwhelming the result. For our carbon we only use prepreg fabric specially produced for this purpose. which is also used in a similar form in Formula 1 and space travel. The material. which is elaborately hand-laminated and cured in several stages in the autoclave. not only impresses with its unique appearance but also with its unique technical properties. With the same volume. it has a specific stiffness three times as high as steel and at the same time. due to its particularly low density. only a fraction of its weight. In order to optimally protect this high-quality material from all kinds of environmental influences. we are the only carbon manufacturer worldwide to use a specially developed plastic coating on all surfaces. In combination with our clear varnish. This ensures a previously unattainable and unique depth effect. which allows the high quality of the material to come into its own.   For an effortless mounting the fairing holder kit is necessary. The shown windscreen is only for illustration and not included.    The facts   - racing part. not for street use - improved wind protection - improved cooling capacity for the brake - better protection of the lower fork tubes - Sealing of all surfaces (inside and outside) with a unique coating to protect against environmental influences of all kinds - Delivery ready for installation - made of prepreg material specially produced for Ilmberger - Manufactured in-house according to ISO 9001 - Attachment using the original attachment points - quick and easy assembly