Sito Gasket - Gasket between the manifold and the muffler - Outer diameter 50 mm - Inner diameter 43 mm - Length 32 mm - for Sito exhaust systemsTechnical Data:Inner diameter: 43 mmOuter diameter: 50 mmHeight: 32 mm

  Stud Bolt Exhaust Stainless Steel (Cylinder Head Bolt)Technical Data:Type:   Stud Bolts Thread:   M8 x 1.25 Diameter:   8 mmLength:   40 mmHead:   None Drive:   None Surface:   No Finishing Material:   Steel Grade:   No Grade Class O-Ring/Washers:   None Manufacturer:   Other

  Exhaust ValveTechnical Data:Head Diameter:   29.90 mmTotal Length:   110.72 mmStem Diameter:   6.94 mm

Exhaust Valve   - 38mm   Hard chrome-plated exhaust valve for two-valve Boxer engines. Valves of top quality. The valve is hard chrome-plated on the shafts and hardened at the shaft ends. The exhaust valve is additionally Stellite-coated.      Technical Data:Head Diameter:   37.9 mmTotal Length:   98.6 mmShaft Diameter:   8 mm

Exhaust Valve   - 32mm - 7mm Stem   Hard chrome-plated exhaust valve for two-valve Boxer engines. Valves of top quality. The valve is hard chrome-plated on the stems and hardened at the stem ends. The exhaust valve is additionally Stellite-coated.Technical Data:Head Diameter:   31.9 mmTotal Length:   102.5 mmStem Diameter:   7 mm

Exhaust Valve   - 36mm - 7mm Stem   Hard chrome-plated exhaust valve for two-valve Boxer engines. Valves of top quality. The valve is hard chrome-plated on the stems and hardened at the stem ends. The exhaust valve is additionally Stellite-coated.        Technical Data:Head Diameter:   36.00 mmTotal Length:   99.00 mmStem Diameter:   7.00 mm

If the BMW Variokoffer becomes too small......we can quickly provide a solution with the robust and easy-to-install expansion bags. Made from high-strength Cordura fabric, they are tailored for the water-cooled GS and offer max. 30 liters of additional storage space without hindering the rider or passenger. After opening two zippers, more storage space is quickly available on the go, with the expansion occurring only in the outer area so that the passenger still has sufficient room.Thanks to integrated reinforcements in the side walls, the bags are absolutely shape-stable, and large reflective strips provide additional safety.-we do not use simple nylon, but certified Cordura fabric made in Germany, as used in motorcycle protective clothing and expedition gear-fabric inner side waterproof coated-Fluorocarbon impregnation and Teflon coating from DuPont with nano-technology as protection against moisture, dirt, oil, and fading-washable and easy to clean-the fabric used has been successfully tested for harmful substances according to Oeko-Tex Standard 100-reflective inserts from 3M Scotchlite ensure best visibility-ergonomic, sturdy carrying handle for practical transport off the motorcycle-easily expandable via a circumferential zipper-built for extreme loads and long durability-best fit-secure attachment and yet quickly removable from the vehicle-low weight with high payload and large usable volume-large main compartment without disturbing subdivisions for maximum space and individual loading-non-slip, soft base plate to avoid paint damage and for secure hold-the measurement of the volume is practical and honest with the bag mounted on the vehicle and not, as is often the case, by estimation or rough calculationAttention: Please use a paint protection film if necessary! (Item number 01-101-0100-0)Dimensions: (L x W x H) approx. 46 x 24 x 13/23 cm; Volume: approx. 2 x 10/2 x 15 liters.Color: black

Fan-disc clutch - BMW original spare part

Bequemer geht's kaum: Die funktionelle Fahrer-Rückenlehne in Braun wird in den Sitz eingesteckt und lässt sich in der Neigung an unterschiedliche Staturen anpassen. So wird der Lendenbereich des Bikers beim lässigen Cruisen oder Beschleunigen angenehm abgestützt. Um den Auf- und Abstieg zu erleichtern, lässt sich die Rückenlehne zudem umklappen. Komfortable Unterstützung für den Fahrer.Fördert angenehme und entspannte Sitzhaltung.Klappbar und in der Neigung verstellbar.Einfache Steckmontage ohne Werkzeug.Passend für Sitzbänke Cross Country, Weekender, Day Rider.Farbe: Braun mit verchromten Metallteilen.

The fairing holder kit for the BMW R NineTLike all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

The fairing holder at the oilcooler fits perfect to the design of the R NineT Racer 2017.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance

Fairing Holder (4 pieces) kit needed for race fairing kit for BMW S 1000 RR 2019. and BMW M 1000 RR.This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The 4-piece trim kit is required for the Racing trim sides and the 1-piece Racing engine spoiler. This holder kit allows the side panels to be attached via quick release fasteners and attaches the 1-piece Racing engine spoiler to the side of the engine and frame.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

Holder Kit for mounting the long bellypan VEU.001.S117S.K on the BMW S 1000 RR 2017  

The side fairing in carbon for the BMW S 1000 RR Stocksport/Racing (2012-2014) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side fairing in carbon for the BMW S 1000 RR Stocksport/Racing (2012-2014) is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The side fairing in carbon for the BMW S 1000 RR is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The 1-piece racing side fairing for the BMW S 1000 RR from 2017 replaces the original part using the original mounting points. The side fairing is a 1-piece version. the upper part of the side fairing is already incorporated into the carbon part. Also the mounting is more easy with a 1 piece side fairing. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter!Race only - no ABE and TÜVThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

The 1-piece side fairing for the BMW S 1000 RR from 2015 replaces the original part using the original mounting points. The side fairing is a 1-piece version. the upper part of the side fairing is already incorporated into the carbon part. Also the mounting is more easy with a 1 piece side fairing. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter! TÃœV Approved Quality This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The carbon side fairing for the BMW S 1000 RR replaces the original piece using the original mounting points. On these carbon parts the upper part of the trim side fairing (plaque brackets) is manufactured as a single piece with the side fairings. separate plaque brackets are not required for our side fairings. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The 1-piece side racing fairing for the BMW S 1000 RR from 2017 replaces the original part using the original mounting points. The side fairing is a 1-piece version. the upper part of the side fairing is already incorporated into the carbon part. Also the mounting is more easy with a 1 piece side fairing. Our production takes a lot of trouble to reduce weight. to make the spearhead of Supersport motorcycles even sharper and lighter!Racing only - no ABE and TÜVThis part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.  

The carbon side fairing for the BMW S 1000 RR replaces the original piece using the original mounting points. On these carbon parts the upper part of the trim side fairing (plaque brackets) is manufactured as a single piece with the side fairings. separate plaque brackets are not required for our side fairings. This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.