electrically adjustable motorcycle handlebar on a BMW R1200RS LC From now on, during your ride, you can adjust it at the push of a button, using two electric motors with planetary gears. Depending on your tour and comfort, you can adjust the handlebar of your R1200RS LC continuously up to 70mm towards you and back. With the adjusted position, you no longer have to lean uncomfortably towards the handlebar, but can sit upright and switch back to a reclining position in seconds during sporty rides. This way, you ride two different motorcycles and can enjoy every ride without restrictions. By combining the E-handlebar with the electrically hydraulic footrest, every tour becomes significantly more relaxed. without ABE

Original BMW Spare Part Additional Information The part with the BMW part number 46 63 8 546 386 is used on the following vehicles:

Slime Tyre Sealant seeks and seals holes of up to 6 mm in the tread area instantly using Fibro-Seal technology. Repair flat tires on cars, trucks, motorcycles, and SUVs with Slime Tyre Sealant and a compressor. Slime can be poured into the tires of any off-road vehicle to prevent flat tires.- Instantly seals holes of up to 6 mm- Non-toxic, non-corrosive, and safe- Non-flammable- Washable with water- Tyre Sensor Safe (look for the yellow label) For repairs onlyContents: 237ml41.77 €/liter (price indication according to §2 of the German Price Indication Regulation (PAngV) for sales in Germany)TPMS (Tire Pressure Monitoring System) CompatibleFor a tire sealant to be accepted by leading sensor manufacturers, it must pass three product tests. After each test, the sensor is reinstalled on the vehicle and checked for functionality. A sensor must be functional after all three tests for the sealant to be approved by TPMS manufacturers.- Safe even with tire pressure monitoring systems (RDKS/TPMS)- Repeatedly seals multiple tire punctures- Non-toxic- Corrosion-resistant- Non-flammable- No aerosol- Water-soluble

Endschalldämpfer Vance & Hines Round Black ECE

Endschalldämpfer Vance & Hines Round Black ECE

Endschalldämpfer Vance & Hines Tapered Black ECE

This part is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance. the Carbon Engine Cover weighs about 105 gram

Plug

The two-part engine protection bar made of matte blasted stainless steel protects the engine housing from damage and perfectly integrates into the elegant overall concept of the motorcycle. Stable tube construction made of matte blasted stainless steel. Includes installation instructions. Weight: approx. 1.9 kg. Additional Information Includes mounting materials

Even a sidewalk can mean an unpleasant and severe ground contact, which can lead to damage to the engine casing. Our engine protection plates protect the headers and the engine block from impacts and stone chips, even during the most intense ground contact.Engine protection plates from HEPCO&BECKER not only enhance the visual appeal of your motorcycle but also emphasize the off-road look. effective protection against stone chips and runovers high-quality technical processing made from high-strength aluminum MADE IN GERMANY in our factory in Pirmasens 3-4mm thick custom-fit manufacturing, adapted to the shape of the motorcycle includes mounting kit and easy-to-understand instructions please refer to the installation instructions and model-specific notes for any potential restrictions

The ESA-Box cover in Carbon for the BMW R 1200 GS (LC) from MY 2017 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

The ESA-Box cover in Carbon for the BMW R 1250 GS from 2019 is a direct replacement for the original component and contributes mainly to weight saving on the motorcycle (up to 70% less) and a higher stiffness of the parts.   The cover for the ESA box is only suitable for the 2019 model year. A comparable protective effect can be achieved by combining the carbon parts RHL.028.GS19T.K and RHR.029.GS19T.K together with the rear hugger. Like all of our carbon fibre parts. it was made according to the latest protocols and industry standards and can be considered to encompass all aspects of current 'best of industry' practice. The part is made completely out of pre-preg carbon fibre materials using an autoclave. As with all our carbon parts. we use a clear plastic coating that not only improves the appearance. but also protects the carbon fibre from scratching and has a unique UV resistance.

EVO Fußrasten-KitDie Original-Fußraste bietet keine bequeme Position? Dann ist das EVO Fußrasten-Kit von SW-MOTECH die ideale Lösung. Ein ausgeklügeltes System, bestehend aus drehbaren Elementen mit fest ineinandergreifenden Zähnen, erlaubt 36 Variationsmöglichkeiten. Die Position der Fußraste lässt sich nach unten, vorne und hinten sowie in der Neigung auf die individuellen Bedürfnisse einstellen.Die modellspezifischen Gelenkadapter werden einfach mit den Originalteilen an der Fußrasten-Aufnahme montiert. Wie das funktioniert, zeigen wir in der Anbauanleitung.Einfache Montage an der original Fußrasten-Aufnahme36-fach verstellbar über drehbare, verzahnte Elemente nach unten, vorne und hinten sowie in der NeigungIndividuelle Einstellung der Höhe (höchste Einstellung entspricht der Originalposition, Absenkung bis max. 15 mm möglich)Sicherer Halt durch Verzahnung der Elemente und VerschraubungMarkierungen erleichtern das symmetrische Einstellen beider SeitenProfil mit abgerundeten Kanten schont die Stiefelsohle und gibt zugleich extra viel GripAbnehmbare, metallverstärkte Gummiauflage mit abrutschsicherer Oberflächenstruktur und großer Auflagefläche (ca. 8 x 5 cm) für mehr Komfort und HaltAus elektropoliertem, korrosionsbeständigem EdelstahlgussMontagematerial im Lieferumfang enthaltenLieferumfang2 x EVO Fußrasten2 x modellspezifische GelenkadapterMontagematerialDetailsMaterial: Edelstahl / GummiFarbe: silbern / schwarzGesamtgewicht: ca. 1,4 kgGenehmigungshinweisDas mit dem Produkt ausgelieferte ABE-Gutachtenheft muss bei der Fahrt immer mitgeführt werden. Diese ABE gilt nur für die gelisteten Modelle und unter Beachtung der Informationen in der Anbauanleitung. Eine Eintragung in die Fahrzeugpapiere ist bei Mitführung des Dokumentes nicht notwendig. Der Verwendungsbereich im ABE-Dokument wird jährlich erweitert. Die aktuelle Version des ABE-Gutachtens steht im Download-Bereich unseres Webshops zur Verfügung.Bitte beachten Sie, dass eine Abklärung zur Freigabe des Produktes für die Motorradfahrzeugkontrolle außerhalb Deutschlands vor dem Erwerb zu klären ist. Technische Artikel, die für eine Eintragung im jeweiligen Land abgelehnt wird, können leider nicht mehr retourniert werden. Für das Ausstellen einer notwendigen ausländischen Zertifizierung können Kosten entstehen.

  Exhaust Connection Gasket   Original Spare PartTechnical Data:Inner Diameter:   36.5 mmOuter Diameter:   38.5 mmHeight:   45 mm

Optimally dissipates heat and effectively prevents heat buildup in your case.The perfect complement to your ZEGA Evo X special system!Only suitable for original end silencers!

  Exhaust GasketTechnical Data:Inner Diameter:   35 mmOuter Diameter:   43 mmThickness:   7 mmScrew Fastening:   none

  Exhaust GasketTechnical Data:Inner Diameter:   38 mmOuter Diameter:   46 mmThickness:   5 mmScrew Fastening:   none

Sito Gasket - Gasket between the manifold and the muffler - Outer diameter 50 mm - Inner diameter 43 mm - Length 32 mm - for Sito exhaust systemsTechnical Data:Inner diameter: 43 mmOuter diameter: 50 mmHeight: 32 mm

  Exhaust ValveTechnical Data:Head Diameter:   29.90 mmTotal Length:   110.72 mmStem Diameter:   6.94 mm

Exhaust Valve   - 38mm   Hard chrome-plated exhaust valve for two-valve Boxer engines. Valves of top quality. The valve is hard chrome-plated on the shafts and hardened at the shaft ends. The exhaust valve is additionally Stellite-coated.      Technical Data:Head Diameter:   37.9 mmTotal Length:   98.6 mmShaft Diameter:   8 mm

Exhaust Valve   - 32mm - 7mm Stem   Hard chrome-plated exhaust valve for two-valve Boxer engines. Valves of top quality. The valve is hard chrome-plated on the stems and hardened at the stem ends. The exhaust valve is additionally Stellite-coated.Technical Data:Head Diameter:   31.9 mmTotal Length:   102.5 mmStem Diameter:   7 mm

Exhaust Valve   - 36mm - 7mm Stem   Hard chrome-plated exhaust valve for two-valve Boxer engines. Valves of top quality. The valve is hard chrome-plated on the stems and hardened at the stem ends. The exhaust valve is additionally Stellite-coated.        Technical Data:Head Diameter:   36.00 mmTotal Length:   99.00 mmStem Diameter:   7.00 mm

If the BMW Variokoffer becomes too small......we can quickly provide a solution with the robust and easy-to-install expansion bags. Made from high-strength Cordura fabric, they are tailored for the water-cooled GS and offer max. 30 liters of additional storage space without hindering the rider or passenger. After opening two zippers, more storage space is quickly available on the go, with the expansion occurring only in the outer area so that the passenger still has sufficient room.Thanks to integrated reinforcements in the side walls, the bags are absolutely shape-stable, and large reflective strips provide additional safety.-we do not use simple nylon, but certified Cordura fabric made in Germany, as used in motorcycle protective clothing and expedition gear-fabric inner side waterproof coated-Fluorocarbon impregnation and Teflon coating from DuPont with nano-technology as protection against moisture, dirt, oil, and fading-washable and easy to clean-the fabric used has been successfully tested for harmful substances according to Oeko-Tex Standard 100-reflective inserts from 3M Scotchlite ensure best visibility-ergonomic, sturdy carrying handle for practical transport off the motorcycle-easily expandable via a circumferential zipper-built for extreme loads and long durability-best fit-secure attachment and yet quickly removable from the vehicle-low weight with high payload and large usable volume-large main compartment without disturbing subdivisions for maximum space and individual loading-non-slip, soft base plate to avoid paint damage and for secure hold-the measurement of the volume is practical and honest with the bag mounted on the vehicle and not, as is often the case, by estimation or rough calculationAttention: Please use a paint protection film if necessary! (Item number 01-101-0100-0)Dimensions: (L x W x H) approx. 46 x 24 x 13/23 cm; Volume: approx. 2 x 10/2 x 15 liters.Color: black

Fan-disc clutch - BMW original spare part